Remote control
Komponen

Remote control

4.6(38)
35
A remote control is a device used to control the Arduino via infrared signals.

Projek yang menggunakan komponen ini

Lighting 220V Bulb with Remote Control
AR-21Mahir
Premium

Lighting 220V Bulb with Remote Control

Switch a real light bulb in your home on and off with a TV remote, without getting up from the sofa.

4.4(23)
31
Laser Security System
AR-23Mahir
Premium

Laser Security System

Just like the laser heist scenes in films: a laser beam shines on a light sensor, and the moment someone steps in and breaks the beam, the red LED lights up and the buzzer starts sounding.

4.8(61)
78
Reading IR Remote Control Codes
AR-16Pemula
Premium

Reading IR Remote Control Codes

Every button on your TV remote sends a secret code using light you cannot see. The infrared receiver catches that light, and the Arduino writes the code of every button you press on your computer…

4.5(39)
55
Led On/Off with IR Receiver and Remote Control
AR-17Pertengahan
Premium

Led On/Off with IR Receiver and Remote Control

Like controlling three separate lamps without leaving your armchair: keys 1, 2 and 3 on the remote turn on the blue, red and green LEDs, and keys 4, 5 and 6 turn them off in the same order.

4.7(45)
66
Playing Melodies with an IR Remote and Buzzer
AR-18Pemula
Premium

Playing Melodies with an IR Remote and Buzzer

Build a music box that plays tunes with the buttons of a TV remote. An infrared receiver catches the remote's signal; one button plays a lively video game tune through the buzzer, another a familiar…

4.8(58)
75
Remote Control with ESP32 IR Receiver (with LCD Screen)
ES-22Pertengahan
Premium

Remote Control with ESP32 IR Receiver (with LCD Screen)

In this project, we use the TSOP4838 IR receiver module to capture signals from a TV, air conditioner, or any other infrared remote control using the ESP32. With the IRremote v4 library, we display decoded nonzero raw codes on the I2C LCD screen. This example is intended to help identify remote control codes; it does not include turning an LED on or off or adjusting its brightness with the remote. This is a great starting point for converting old remotes into smart home controls.

4.7(19)
30
ESP32 IR Universal Remote (IR Receiver + Remote Control + 3 LEDs + Buzzer + OLED)
ES-39Mahir
Premium

ESP32 IR Universal Remote (IR Receiver + Remote Control + 3 LEDs + Buzzer + OLED)

Read a ready-made IR remote with the ESP32 and control your own device! The infrared receiver (NEC protocol, 38kHz) captures the signals of a 20-key remote: keys 1/2/3 toggle three separate LEDs and PWR turns them all off. Press an unknown key and the OLED shows its HEX code, so you can easily add your own remote's buttons to the code.

4.5(9)
16
Raspberry Pi Pico IR Remote Control for an LED and a Relay (IR Receiver + Relay + LED)
PI-36Pertengahan
Premium

Raspberry Pi Pico IR Remote Control for an LED and a Relay (IR Receiver + Relay + LED)

Turn the light on with a remote! We are building a remote-controlled LED and socket with a Raspberry Pi Pico, an IR receiver and a relay. 1 toggles the relay, 2 the LED; + and − change the LED brightness in 5 steps, PLAY starts a breathing mode and 3 runs the relay on a timer. NEC codes are decoded without a library, from pulse times measured with an interrupt.

Arduino IR Remote Ambient Light (24-LED NeoPixel Ring + Remote)
AR-120Pemula
Premium

Arduino IR Remote Ambient Light (24-LED NeoPixel Ring + Remote)

Just like the remote of a home LED strip, except you code the light! With an infrared remote you change the colour, brightness and effect of a 24-LED WS2812B ring. Number keys pick 10 colours, next/prev step through 8 effects such as breath, rainbow, comet and candle, and C sets a sleep timer. The last setting is kept in EEPROM, and the buzzer answers every key with a short beep.

Arduino IR Remote Pan-Tilt Head (2 Servos + I2C LCD + Remote)
AR-127Pertengahan
Premium

Arduino IR Remote Pan-Tilt Head (2 Servos + I2C LCD + Remote)

A two-axis head you steer with a TV remote! The lower SG90 servo pans the head left and right, the upper one tilts it up and down, and every press of an arrow key on the infrared remote moves it one step. MENU + 1-3 stores up to three poses, a number key glides the head back to one, and PLAY patrols between them. An I2C LCD shows the angles, and the poses stay in EEPROM.

Arduino Remote Control Times Table Quiz (IR Remote + I2C LCD + 2 LEDs)
AR-134Pemula
Premium

Arduino Remote Control Times Table Quiz (IR Remote + I2C LCD + 2 LEDs)

A remote control turns into a game show clicker: the I2C LCD shows "7 x 8 = ?", you type the answer with the number keys and send it with PLAY. The time bar on the bottom row melts in 10 seconds; fast right answers score more, and after 3 in a row a streak bonus kicks in. There are three levels, reverse questions, a team mode with turns and a TEST key that gives the whole class the same questions; a green or red LED shows right or wrong.

Arduino Remote Claw Machine Game: Grab the Plush in 30 Seconds (IR + 3 Servos + LCD)
AR-136Pertengahan
Premium

Arduino Remote Claw Machine Game: Grab the Plush in 30 Seconds (IR + 3 Servos + LCD)

A desktop version of the plush claw machine at the mall, played with a TV remote. Three servos swing the boom left and right, lower and raise the claw and open and close it; an I2C LCD shows the 30-second countdown, the try counter and a map of the machine. Just like the real thing there is a grip chance: right above the plush the claw will most likely hold it and carry it to the prize hole, one stop off and the plush slips away at the top.