SW-18010P Spring Vibration Sensor
Komponen

SW-18010P Spring Vibration Sensor

0.0(0)
The SW-18010P is a two-leg spring switch that senses shaking. Inside the black body there is a fine spring with a metal pin in its centre; at rest the two do not touch, so the circuit is open. When the part is shaken, the spring wobbles, touches the pin and closes the contact between the two legs for an instant. It has no polarity, so you can plug it in either way round. It does not produce a voltage by itself: connect one leg to GND and the other to the positive rail through a 10 kΩ pull-up resistor and read the short pulse. Because the spring keeps swinging for a while, one knock gives several pulses in a row, so it works well with a circuit that stretches the pulse, such as a 555. According to seller data it handles at most 12 V and 20 mA, so an LED or a buzzer is not driven directly through it. Unlike the SW-420 module it is a bare part with no comparator board. The thin leg bends easily, so push it into the breadboard gently. It is not a measuring or safety device: it only reports that shaking happened, not how strong it was.