AR-147MahirPremium
Arduino Industrial Sorting Conveyor: Boxes Sorted by Height (NEMA 17 + A4988 + HC-SR04 + Servo + LCD)
A desktop model of a factory sorting line: a NEMA 17 stepper on an A4988 driver keeps the belt moving, and an HC-SR04 above the belt measures the height of every passing box. Each box is tracked by belt steps from the sensor to the arm; boxes of 6 cm and up are pushed aside by an SG90 servo arm, low ones carry on. The I2C LCD counts short and tall boxes and shows the last reading and how many boxes are on the belt.
0.0(0)

Bring a factory sorting line to your desk: the belt never stops, an ultrasonic sensor above it measures the height of every box that passes, and an arm pushes the tall ones aside at exactly the right moment. A stepper motor pulls the belt, a servo arm does the sorting and a screen counts short and tall boxes and shows the last reading. You build the whole sense, decide, track and act chain just like a real automation line.
Kod Sumber
Kandungan Premium
Kod sumber, versi blok dan soalan lazim projek ini terbuka untuk ahli Premium.
- Semua Kod Projek
- Versi blok
- Soalan Lazim
