ES-18PertengahanPremium
Digital Clock with ESP32 and DS1307 RTC (I2C + LCD)
In this project, we display the time and date on a 16x2 I2C LCD screen using the DS1307 real-time clock (RTC) module. The DS1307 is a battery-backed RTC that maintains the time even if the ESP32 is powered off. Both modules share the same I2C bus (SDA/SCL), allowing us to learn how to control multiple devices using just two signal wires. Through this project, you will gain practical knowledge of the I2C communication protocol, RTC module operation, and dynamic data display on an LCD screen.
4.6(26)
40 selesai
A desk clock that keeps the right time even when the power goes out. The DS1307 clock module keeps time with its own battery; the ESP32 reads it constantly and writes the date and a short Turkish day name on the top line of the LCD screen, and the time with seconds on the bottom line. If the module has never been set, the clock sets itself to the moment the code was uploaded.
Kod Sumber
Projek ini juga disertakan dengan blok. Seperti kod, blok dibuka dengan Premium. Apakah pengekodan blok?
Kandungan Premium
Kod sumber, versi blok dan soalan lazim projek ini terbuka untuk ahli Premium.
- Semua Kod Projek
- Versi blok
- Soalan Lazim
