Projek · Arduino / ESP32 / Pico

Teroka Projek Arduino

Ratusan projek dari pemula hingga mahir: gambar rajah litar, kod dan video. Mulakan di tahap mana pun kamu berada.

ESP32 Automatic Cat Toy (PIR + 2 Servos + LDR + Buzzer)
ES-63Pemula
Premium

ESP32 Automatic Cat Toy (PIR + 2 Servos + LDR + Buzzer)

Keep your cat busy while it is home alone! When the PIR sensor spots the cat, the buzzer chirps like a bird and a feather wand on two SG90 servos moves like prey: mouse dash, hide and seek, zigzag, circle and bug jitter. A game lasts one minute, then the toy rests; when the LDR sees darkness it never plays at night. The moves come from the ESP32's hardware randomness, so the cat cannot learn them.

5.0(1)
ESP32 Robot Dog That Sees You: Wags Its Tail and Barks (HC-SR04 + 2 Servos + Buzzer)
ES-73Pemula
Premium

ESP32 Robot Dog That Sees You: Wags Its Tail and Barks (HC-SR04 + 2 Servos + Buzzer)

A robot dog that sleeps and snores when nobody is around, then wakes up when you reach out and tilts its head to say hello. The HC-SR04 is its eyes: the closer you get, the faster the tail servo wags, and under 15 cm it barks "woof woof". Walk away and it waits, then sulks: the head servo turns away and the buzzer sighs. Come back and it can't contain its joy. All built on a state machine, a median filter and non-blocking timing.

ESP32 Baby Cradle Rocker (Servo + I2C LCD + 2 Buttons + Buzzer)
ES-74Pemula
Premium

ESP32 Baby Cradle Rocker (Servo + I2C LCD + 2 Buttons + Buzzer)

A helper for tired parents: an SG90 servo rocks a toy cradle with a soft, sine-like swing while a buzzer quietly plays Brahms' Lullaby. Two buttons give you 3 speeds (SLOW, MEDIUM, FAST), lullaby on/off and a 10, 20 or 30 minute timer, and the I2C LCD shows the mode and the time left. When time is up the cradle never stops dead: the swing fades out slowly and the lullaby slows to its end.

ESP32 Blooming Tulip Lamp: Opens at a Touch (Servo + 24 LED Ring + TTP223)
ES-76Pemula
Premium

ESP32 Blooming Tulip Lamp: Opens at a Touch (Servo + 24 LED Ring + TTP223)

The maker world's favourite blooming flower lamp, with a Tulip Era twist: touch the TTP223 sensor and an SG90 servo slowly opens the petals on a soft speed curve while a 24 LED ring fades in from darkness. While it is open, every touch changes the colour: red, purple, yellow, warm white and a tulip garden that drifts around the ring. Hold it and the tulip closes as the light fades out.

ESP32 Bluetooth Car (L298N)
ES-107Pemula
Bluetooth

ESP32 Bluetooth Car (L298N)

Drive a two-wheel car over Bluetooth with the joystick on your phone; no internet needed, works on iPhone and Android. This project is the step-by-step guide to the Car remote Bluetooth template in the app, built with an ESP32, an L298N and two motors. Go to Workshop › Devices › Add a device › Bluetooth, pick Car remote and upload the code from Get the code. The Set up as a Bluetooth panel button on this page opens the wizard with this template.

1
ESP32 Bluetooth Servo Lock
ES-111Pemula
Bluetooth

ESP32 Bluetooth Servo Lock

Control an SG90 servo as a small latch from your phone over Bluetooth: lock, open or set the angle, no internet or Wi-Fi needed. This project is the step-by-step guide to the Servo lock Bluetooth template in the app, built with an ESP32, one servo and 3 wires. Go to Workshop › Devices › Add a device › Bluetooth, pick Servo lock and upload the code with Get the code. The Set up as a Bluetooth panel button on this page opens the wizard with this template too.