Projek · Arduino / ESP32 / Pico

Teroka Projek Arduino

Ratusan projek dari pemula hingga mahir: gambar rajah litar, kod dan video. Mulakan di tahap mana pun kamu berada.

Laser Warning System
AR-22Pertengahan
Premium

Laser Warning System

You set up an invisible beam fence, just like in the movies. A laser shines onto a light sensor on the other side; the moment someone walks through and breaks the beam, the LED lights up and the…

4.8(64)
83
Doorbell and Light with Motion Sensor
AR-25Pertengahan
Premium

Doorbell and Light with Motion Sensor

When someone comes up to your door, you know before they even ring. As soon as the motion sensor spots someone, the LED lights up and the buzzer plays a three-note chime from high to low; when the…

4.7(54)
72
Using a Flame Sensor
AR-50Pertengahan
Premium

Using a Flame Sensor

A little guard that spots fire before you do, in the kitchen or the workshop. The flame sensor picks up the invisible light that fire gives off; while all is well the green LED is on, and when it…

4.6(33)
44
RFID Authentication
AR-54Pertengahan
Premium

RFID Authentication

Just like the card entry at an apartment door: you hold your card near the RFID reader, and the Arduino compares its number with the one it has saved.

4.8(65)
84
Smart Stair and Corridor Lighting
AR-82Pertengahan
Premium

Smart Stair and Corridor Lighting

Step onto the stairs or into the hallway and the lights come on one step at a time in the direction you are walking.

5.0(36)
52
Automatic Lighting with the ESP32 PIR Motion Sensor
ES-19Pertengahan
Premium

Automatic Lighting with the ESP32 PIR Motion Sensor

In this project an HC-SR501 PIR motion sensor detects someone entering the room and turns on an LED automatically. millis() tracks how long the LED stays on: each HIGH reading refreshes the last-motion time, and the LED turns off at least 10 seconds after the last HIGH. The code also waits 50 ms with delay(50) in every loop, so the loop is not fully non-blocking. Great for stairs, hallways, bathrooms or closet lighting.

4.4(24)
38
Raspberry Pi Pico Keypad Lock (4x4 Keypad + I2C LCD + Servo)
PI-23Pertengahan
Premium

Raspberry Pi Pico Keypad Lock (4x4 Keypad + I2C LCD + Servo)

A 4-digit code opens the door, and three wrong tries mean a 30 second wait! The Raspberry Pi Pico checks the PIN typed on a 4x4 keypad: if it's right, an SG90 servo unlocks and relocks by itself after 5 seconds. An I2C LCD shows the stars, the tries left and the countdown, and a buzzer beeps on every key. The default PIN is 1234; change it with the A key and the new one is saved to pin.txt.

ESP32 Earthquake Shake Alarm (MPU-6050 + OLED Display + Buzzer)
ES-45Pertengahan
Premium

ESP32 Earthquake Shake Alarm (MPU-6050 + OLED Display + Buzzer)

When your desk shakes, this screen notices first! The ESP32 measures vibration with an MPU-6050 accelerometer and draws a live trace that scrolls like a seismograph on a 0.96-inch OLED display. When the shaking passes the threshold, a passive buzzer sounds a siren and the red LED flashes; one button silences and resets it. It is an educational shake meter, not an official earthquake warning.

5.0(1)
ESP32 Prayer Time Clock (Wi-Fi + OLED Display + Buzzer)
ES-47Pertengahan
Premium

ESP32 Prayer Time Clock (Wi-Fi + OLED Display + Buzzer)

How long until Maghrib? The ESP32 gets the time from the internet, pulls your city's prayer times using the Diyanet method and shows the next prayer with a big countdown on a 0.96 inch OLED. When the time comes, a passive buzzer plays a short, gentle chime. Press the button to list all of today's times, or hold it to try the alert right away in demo mode.

1
Arduino Kitchen Scale (HX711 + Load Cell + I2C LCD)
AR-106Pertengahan
Premium

Arduino Kitchen Scale (HX711 + Load Cell + I2C LCD)

Put the bowl on, press the button, zero! A real kitchen scale with an HX711 amplifier and a 5 kg load cell: the I2C LCD shows the weight in grams or ounces, with a fill bar on the second row. One button does two jobs: a short press tares, a long press switches between g and oz. At 5 kg an overload warning appears. Calibration, a moving average and short/long presses in one project.

Arduino Smart Thermostat (DHT22 + Relay + I2C LCD)
AR-107Pertengahan
Premium

Arduino Smart Thermostat (DHT22 + Relay + I2C LCD)

Room at 19 degrees, target 21: the relay clicks on! The DHT22 measures the temperature, and when it drops below the target the relay turns the heater on. Thanks to hysteresis, the relay does not keep clicking around the target. Two buttons set the target in 0.5 °C steps, and it is kept in EEPROM; the I2C LCD shows temperature, humidity and heater state. The basics of real home automation in one project.

5.0(1)
1
Raspberry Pi Pico IR Remote Control for an LED and a Relay (IR Receiver + Relay + LED)
PI-36Pertengahan
Premium

Raspberry Pi Pico IR Remote Control for an LED and a Relay (IR Receiver + Relay + LED)

Turn the light on with a remote! We are building a remote-controlled LED and socket with a Raspberry Pi Pico, an IR receiver and a relay. 1 toggles the relay, 2 the LED; + and − change the LED brightness in 5 steps, PLAY starts a breathing mode and 3 runs the relay on a timer. NEC codes are decoded without a library, from pulse times measured with an interrupt.