Teroka Projek Arduino
Ratusan projek dari pemula hingga mahir: gambar rajah litar, kod dan video. Mulakan di tahap mana pun kamu berada.

Led On/Off with IR Receiver and Remote Control
Like controlling three separate lamps without leaving your armchair: keys 1, 2 and 3 on the remote turn on the blue, red and green LEDs, and keys 4, 5 and 6 turn them off in the same order.

Remote Control with ESP32 IR Receiver (with LCD Screen)
In this project, we use the TSOP4838 IR receiver module to capture signals from a TV, air conditioner, or any other infrared remote control using the ESP32. With the IRremote v4 library, we display decoded nonzero raw codes on the I2C LCD screen. This example is intended to help identify remote control codes; it does not include turning an LED on or off or adjusting its brightness with the remote. This is a great starting point for converting old remotes into smart home controls.

ESP32 Live Gold and Currency Display (Wi-Fi + OLED Display + Button)
What is gold trading at in Turkey right now? No need to check your phone! The ESP32 joins Wi-Fi, pulls gram gold, US dollar and euro prices in Turkish lira from a free, keyless JSON source and shows them on a 0.96 inch OLED. Prices refresh every 60 seconds; the button flips pages and a long press refreshes right away. If the internet drops, the last values stay on screen with an OFFLINE badge.

ESP32 Prayer Time Clock (Wi-Fi + OLED Display + Buzzer)
How long until Maghrib? The ESP32 gets the time from the internet, pulls your city's prayer times using the Diyanet method and shows the next prayer with a big countdown on a 0.96 inch OLED. When the time comes, a passive buzzer plays a short, gentle chime. Press the button to list all of today's times, or hold it to try the alert right away in demo mode.

Raspberry Pi Pico IR Remote Control for an LED and a Relay (IR Receiver + Relay + LED)
Turn the light on with a remote! We are building a remote-controlled LED and socket with a Raspberry Pi Pico, an IR receiver and a relay. 1 toggles the relay, 2 the LED; + and − change the LED brightness in 5 steps, PLAY starts a breathing mode and 3 runs the relay on a timer. NEC codes are decoded without a library, from pulse times measured with an interrupt.

Raspberry Pi Pico W Phone-Controlled RGB Lamp (NeoPixel Ring + OLED + Button)
Pick a color on your phone and the lamp on your desk switches to it instantly! The Raspberry Pi Pico W joins Wi-Fi and listens for commands on a public MQTT broker, so any MQTT app on your phone can change the color, brightness and effect of a 24-LED NeoPixel ring. The OLED shows the connection and the last command. A local button works even without internet, and the last setting survives a power cut.

Raspberry Pi Pico W Door Alarm with Phone Notifications (HC-SR04 + OLED + Buzzer)
A home alarm that sounds a siren and pings your phone when the door opens! The Raspberry Pi Pico W joins your home Wi-Fi, and an HC-SR04 facing the door notices the change in distance as it opens. You arm it with a button; when the door opens, a 5-second entry delay starts, and if nobody disarms it the buzzer wails, the red LED flashes and an urgent notification goes out. The OLED shows the state, countdown, clock and send result.

Raspberry Pi Pico W Latest Earthquakes Display (OLED + NeoPixel Ring + Buzzer)
The latest earthquakes in Turkey, right on your desk! The Pico W fetches the open data of the earthquake observatory once a minute and shows the magnitude, place, time, depth and distance to your home on an OLED display. A NeoPixel ring takes its colour from the magnitude; when a new quake passes the limit it shakes and the buzzer warns. A button pages through the last 5 quakes, a long press mutes for 10 minutes. For information only, not an official warning system.

ESP32 Weather Needle (Servo + WS2812B LED Ring + OLED)
A gauge that shows the weather with a needle and light instead of text! Over Wi-Fi the ESP32 fetches the current weather of six cities in one request; an SG90 servo needle points at sunny, partly cloudy, cloudy, rain or snow-storm on a card. A 24-LED ring shows the temperature as color and the weather as animation, and a 0.96 inch OLED shows city, temperature and wind. A button changes the city; hold it for a demo.

Arduino IR Remote Pan-Tilt Head (2 Servos + I2C LCD + Remote)
A two-axis head you steer with a TV remote! The lower SG90 servo pans the head left and right, the upper one tilts it up and down, and every press of an arrow key on the infrared remote moves it one step. MENU + 1-3 stores up to three poses, a number key glides the head back to one, and PLAY patrols between them. An I2C LCD shows the angles, and the poses stay in EEPROM.

Raspberry Pi Pico W ISS Tracker (OLED World Map + Servo Pointer + Buzzer)
Where is the International Space Station right now? The Raspberry Pi Pico W fetches its position from the internet every 5 seconds; on a world map on the 0.96 inch OLED the station blinks, its past track is drawn solid and the path ahead dotted. An SG90 servo pointer shows which way the station is from your home, and when it is close an LED and the buzzer say "look up". A button switches to the people in space and the raw data; without data an orbit model keeps going.

Raspberry Pi Pico W Phone-Controlled Scrolling LED Sign (MAX7219 8x32 + MQTT + Buzzer)
Type on your phone and the message scrolls across the sign on your door within seconds! The Raspberry Pi Pico W joins Wi-Fi and listens on its own topic on a public MQTT broker; a message from any MQTT app on your phone scrolls 3 times across a MAX7219 8x32 LED sign. Turkish letters have their own font, and when idle the sign shows the time from the internet. There are speed and blink commands, plus a button that replays the last 5 messages.
