The 74HC32 is a 14-pin (DIP-14) logic IC that contains four two-input OR gates. The output of an OR gate is 1 when at least one of its inputs is 1; it is 0 only while both inputs are 0. The inputs of the first gate are pins 1 and 2 and its output is pin 3. It runs from 2 to 6 V; pin 14 goes to the supply (VCC) and pin 7 to GND. Unused inputs must not be left floating: tie them to GND or VCC, otherwise the output behaves unpredictably and the chip draws needless current. Connect an LED with a 470 Ω to 1 kΩ resistor to an output to see the result directly. More than 6 V damages the chip, so put a 5 V regulator in between when you use a 9V battery. It is used where either of two sources is enough, for example a bell that either of two buttons can ring, or several sensors that trigger one shared alarm.

