A4988 Stepper Motor Driver Module
Komponentlar

A4988 Stepper Motor Driver Module

4.6(14)
21
The A4988 is a very popular driver board designed to control bipolar stepper motors, which has become the standard, especially in 3D printers and desktop CNC projects. It allows you to manage complex motor movements with extreme precision using only two pins (Step/Step and Direction/Dir) from the microcontroller. The biggest advantage is that it supports full, half, quarter, 1/8 and 1/16 stepping (microstepping) modes, allowing the motor to run much more smoothly, precisely and quietly. The tiny trimpot (potentiometer) can be used to manually limit the maximum current to the motor, preventing overheating and damage to the motor. It usually works with motor voltages between 8V and 35V and can deliver up to 2A per channel with active cooling (heatsink block). It is ideal for driving stepper motors such as NEMA 17 by plugging directly into expansion boards such as CNC Shield or RAMPS, or by using it on a breadboard.

Bu komponent ishlatiladigan loyihalar

Arduino Product Turntable (NEMA 17 Stepper Motor + A4988 + LCD)
AR-116O‘rta
Premium

Arduino Product Turntable (NEMA 17 Stepper Motor + A4988 + LCD)

Build your own turntable for product photos and 360-degree videos! A NEMA 17 stepper is driven by an A4988 from just two signals and speeds up and slows down smoothly, so the product never wobbles. There are three modes: continuous spin with the speed on a pot, photo 360 that splits a turn into 12, 24 or 36 stops with a beep at each one, and a showcase-style ±90° swing. The I2C LCD shows speed, angle and shot count.

ESP32 Smart Curtain (NEMA 17 + A4988 + LDR + OLED)
ES-56O‘rta
Premium

ESP32 Smart Curtain (NEMA 17 + A4988 + LDR + OLED)

The curtain opens by itself when the sun comes up and closes after dark! An LDR measures the light, an A4988 driver turns a NEMA 17 stepper with a soft start and stop, and the 0.96 inch OLED shows a window drawing, how open the curtain is and a sun or moon. Two buttons open and close it by hand, and holding one stops it halfway. The position is saved to flash, so after a power cut the curtain knows where it is.

Arduino 3-Floor Elevator (NEMA 17 Stepper Motor + A4988 + Servo Door + TM1637)
AR-124O‘rta
Premium

Arduino 3-Floor Elevator (NEMA 17 Stepper Motor + A4988 + Servo Door + TM1637)

Build a model elevator that steals the show at the science fair! A NEMA 17 stepper driven by an A4988 lifts and lowers the cabin smoothly; at each floor it plays a "ding-dong", an SG90 servo opens the door and closes it after three warning beeps. Calls are served like in a real elevator: floors ahead first, then the way back, and the cabin stops for calls on the way. The TM1637 display shows the direction arrow, floor and door state.

Raspberry Pi Pico Timelapse Camera Slider (NEMA 17 + A4988 + KY-040 + OLED)
PI-48O‘rta
Premium

Raspberry Pi Pico Timelapse Camera Slider (NEMA 17 + A4988 + KY-040 + OLED)

Build your own slider for cinematic sliding shots! The Raspberry Pi Pico turns a NEMA 17 stepper very slowly and smoothly through an A4988 driver, and the carriage carries a phone or camera along a rail. With a KY-040 encoder you pick the mode, distance, time, direction and frame count from a menu. In VIDEO mode the carriage eases in and out; in TIMELAPSE mode it stops at every frame and waits for the shake to settle. The OLED shows progress and time left.

Arduino Tower Crane (NEMA 17 Stepper Motor + A4988 + Servo + Joystick + I2C LCD)
AR-135O‘rta
Premium

Arduino Tower Crane (NEMA 17 Stepper Motor + A4988 + Servo + Joystick + I2C LCD)

A desktop tower crane: a NEMA 17 stepper on an A4988 driver turns the tower on a speed ramp, an SG90 servo lowers and raises the hook, and a joystick is the operator lever. Rotation stops at ±170°; while the tower slews, a yellow beacon flashes and the buzzer goes "beep-beep". The joystick button saves 3 stops; a long press lets the crane carry the load alone, and a touch on the lever means STOP. The I2C LCD shows angle, hook depth and stops.

Arduino Industrial Sorting Conveyor: Boxes Sorted by Height (NEMA 17 + A4988 + HC-SR04 + Servo + LCD)
AR-147Yuqori
Premium

Arduino Industrial Sorting Conveyor: Boxes Sorted by Height (NEMA 17 + A4988 + HC-SR04 + Servo + LCD)

A desktop model of a factory sorting line: a NEMA 17 stepper on an A4988 driver keeps the belt moving, and an HC-SR04 above the belt measures the height of every passing box. Each box is tracked by belt steps from the sensor to the arm; boxes of 6 cm and up are pushed aside by an SG90 servo arm, low ones carry on. The I2C LCD counts short and tall boxes and shows the last reading and how many boxes are on the belt.

Raspberry Pi Pico W Flagpole: A Motorized Pole That Raises the Flag Smoothly (NEMA 17 + A4988 + 2 Buttons + Buzzer)
PI-81O‘rta
Premium

Raspberry Pi Pico W Flagpole: A Motorized Pole That Raises the Flag Smoothly (NEMA 17 + A4988 + 2 Buttons + Buzzer)

A motorized flagpole with a Raspberry Pi Pico W. Press the green button and a NEMA 17 stepper winds the rope, raising the flag with a soft start, steady speed and soft stop in 40 seconds. The red button lowers it; hold it for 1 second and the flag first goes to the top, then down to half-mast. The position is kept by counting steps, an A4988 driver powers the motor from 12 V, and the buzzer only gives short beeps.

Arduino Industrial Mixing Tank: Fill, Mix, Drain with PLC Logic (HC-SR04 + 2 Relays + NEMA 17 + A4988 + LCD + E-Stop)
AR-152Yuqori
Premium

Arduino Industrial Mixing Tank: Fill, Mix, Drain with PLC Logic (HC-SR04 + 2 Relays + NEMA 17 + A4988 + LCD + E-Stop)

The classic batch process task from industrial automation classes: fill the tank, mix, drain, count the batch. The code runs step by step with PLC logic (S0 IDLE → S1 FILL → S2 MIX → S3 DRAIN → S4 DONE). Two relays open the inlet and outlet valves, an HC-SR04 measures the level and a NEMA 17 mixer turns and reverses. It has START, STOP, a latching EMERGENCY STOP, a tower lamp and a timeout fault.

ESP32 Robot Vacuum Cleaner: Turns at Obstacles and Maps the Room (2 NEMA 17 + 2 A4988 + HC-SR04 + 2 Bumpers + OLED)
ES-87Yuqori
Premium

ESP32 Robot Vacuum Cleaner: Turns at Obstacles and Maps the Room (2 NEMA 17 + 2 A4988 + HC-SR04 + 2 Bumpers + OLED)

A two-wheeled robot vacuum cleaner that moves like the real thing. Two NEMA 17 steppers turn the wheels: it draws a spiral, drives straight, slows down and turns when the HC-SR04 sees an obstacle, backs off and turns away when a bumper hits, and does an edge lap along the walls. It works out its position from the wheel steps and shows a map of the room on the OLED with the cleaned percentage and time, then drives back to its start.