AA Battery
Komponentlar

AA Battery

5.0(14)
38
AA Battery is a cylindrical disposable battery type that provides a nominal voltage of 1.5V. It is widely used as an external power source in Arduino projects. Usually 2 or 4 are connected in series to provide the necessary voltage for motor driver boards, remote controls and portable circuits. When used with a battery holder, it can be easily integrated into breadboard projects.

Bu komponent ishlatiladigan loyihalar

Laser Warning System
AR-22O‘rta
Premium

Laser Warning System

You set up an invisible beam fence, just like in the movies. A laser shines onto a light sensor on the other side; the moment someone walks through and breaks the beam, the LED lights up and the…

4.8(64)
83
Laser Security System
AR-23Yuqori
Premium

Laser Security System

Just like the laser heist scenes in films: a laser beam shines on a light sensor, and the moment someone steps in and breaks the beam, the red LED lights up and the buzzer starts sounding.

4.8(61)
78
Raspberry Pi Pico Battery Tester (Voltage Divider + OLED + 3 LEDs)
PI-46Boshlang‘ich
Premium

Raspberry Pi Pico Battery Tester (Voltage Divider + OLED + 3 LEDs)

Which batteries in the drawer are still good? The moment you touch a battery to the two probes, the Raspberry Pi Pico shows the voltage, the charge percent and a filling battery icon on an OLED display, and a green, yellow or red LED gives the verdict. A button switches between AA, NiMH, Li-ion and 9 V. A voltage divider brings even 9 V down to a level the Pico can safely measure, and averaging 32 readings keeps the value steady.

ESP32 IoT Plant Watering (Soil Sensor + Pump)
ES-102O‘rta
IoT

ESP32 IoT Plant Watering (Soil Sensor + Pump)

Let the pump start by itself when the soil in your pot dries out, and watch the soil moisture live on your phone. This project is the step-by-step guide to the Soil moisture + pump IoT template in the app, built with an ESP32, a soil moisture sensor, a relay and a mini water pump. Go to Workshop › Devices › Add a device; Ohmi prepares the code with your own device key. The code on this page is an example: the key and Wi-Fi details are placeholders.

ESP32-CAM Camera That Takes Photos When It Sees Motion (PIR + microSD)
ES-105O‘rta
Premium

ESP32-CAM Camera That Takes Photos When It Sees Motion (PIR + microSD)

A battery-powered motion camera for a bird box or the front door. When the HC-SR501 PIR sees motion, the ESP32-CAM wakes from deep sleep, takes three photos and saves them in order on the board's own microSD slot as foto_0001.jpg, foto_0002.jpg. The photo number lives in EEPROM, so the order survives a battery change. When the motion is over the board goes back to sleep; no Wi-Fi or app needed.