Arduino UNO R4 WiFi
Komponentlar

Arduino UNO R4 WiFi

0.0(0)
1
The Arduino UNO R4 WiFi has the same size and pin layout as the classic Uno, but is a much more powerful board. Its main processor is a 48 MHz 32-bit Renesas RA4M1 (256 KB flash, 32 KB RAM), and the on-board ESP32-S3 module adds Wi-Fi and Bluetooth (BLE). On the front there is a 12x8 red LED matrix you can draw on from code, plus a USB-C port, a 12-bit DAC (A0), a real-time clock (RTC), a CAN bus and a Qwiic connector. Its pins run at 5 V, so most shields and modules written for the Uno plug straight in. Wi-Fi uses the WiFiS3 library and the matrix uses Arduino_LED_Matrix. Most Uno R3 sketches run as they are; old code that touches AVR registers directly (for example Timer1 libraries) has to be changed. It suits web servers, internet clocks, weather displays and IoT projects.

Bu komponent ishlatiladigan loyihalar

UNO R4 WiFi LED Matrix Text and Animation
AR-169Boshlang‘ich
Premium

UNO R4 WiFi LED Matrix Text and Animation

The 12x8 LED matrix on the UNO R4 WiFi needs no extra parts at all. In this project a message scrolls across the matrix from right to left, then a heart beats three times and a smiley winks. Type your own message in the Serial Monitor, press Enter and it scrolls instead. You learn text scrolling with ArduinoGraphics and drawing your own animation frames as 8x12 arrays.

UNO R4 WiFi Web Server: Relay and LED
AR-170O‘rta
Premium

UNO R4 WiFi Web Server: Relay and LED

The UNO R4 WiFi joins your home Wi-Fi and serves its own web page. Two big buttons in your phone's browser switch the relay (a lamp LED) and a second LED on and off; no extra app needed. At start-up the board's IP address scrolls on the LED matrix, then the matrix shows the state with two icons: the lamp on the left, the LED on the right. You learn to build a web server with the R4's own WiFiS3 library.

UNO R4 WiFi Internet Clock: NTP and Matrix
AR-171O‘rta
Premium

UNO R4 WiFi Internet Clock: NTP and Matrix

A clock you never have to set: the UNO R4 WiFi joins Wi-Fi, gets the time from an NTP server on the internet and sets the RTC (real-time clock) inside the board. Hours and minutes scroll across the 12x8 LED matrix and the bottom row shows the seconds as a filling bar. The clock is corrected from the internet every 6 hours; unplug it, plug it back in and it finds the right time again by itself. No extra parts.

UNO R4 WiFi DAC Melody and Wave Generator
AR-172O‘rta
Premium

UNO R4 WiFi DAC Melody and Wave Generator

A classic Arduino makes sound only by switching on and off; the UNO R4's 12-bit DAC sends a real waveform to the speaker. In this project a button cycles four modes: a melody (Ode to Joy), a sine, a square and a sawtooth wave. In the melody the pot sets the tempo; for the waves it sets the frequency from 100 to 1000 Hz. The 12x8 LED matrix scrolls the current wave shape or shows the notes like a piano roll.