BD140 PNP Power Transistor
Komponentlar

BD140 PNP Power Transistor

0.0(0)
The BD140 is the PNP complement of the BD139 and switches medium-power loads from the positive side. Its emitter goes to the positive rail; pulling the base about 0.7 V below the emitter turns it on, and current flows from the collector to the load. Its ratings match the BD139 with the directions reversed: 1.5 A continuous and 3 A pulsed collector current, 80 V from collector to emitter, at most 5 V reverse emitter-base voltage and 0.5 A base current. Its current gain (hFE) is 40 to 250 at 150 mA and at least 25 at 0.5 A; at 0.5 A with 50 mA of base current, at most 0.5 V remains between emitter and collector. In the TO-126 package, printed face towards you and legs down, the pins from left to right are 1 E (emitter), 2 C (collector) and 3 B (base); the same as the BD139 but different from the BC557. The metal back is connected to the collector, so keep it away from other lines. Without a heat sink it handles about 1.25 W at most; for more, use a heat sink with an insulator. With the BD139 it reverses a motor in an H-bridge; both share one package, so check the printing before fitting it.