CD4017 Decade Counter
Komponentlar

CD4017 Decade Counter

0.0(0)
The CD4017 is a 16-pin (DIP-16) decade counter IC that sets the next of its ten outputs to 1 on every pulse at the clock input. Only one output is 1 at a time, so LEDs on the outputs light one after another and can all share a single resistor. The clock input is pin 14 and it counts as the pulse rises from 0 to 1. Counting is enabled while the enable pin 13 is tied to GND; when the reset pin 15 goes to 1 the counter returns to the start, so it is normally held at GND. The outputs Q0 to Q9 are pins 3, 2, 4, 7, 10, 1, 5, 6, 9 and 11 in that order; pin 12 is the carry output that drives the next chip. It runs from 3 to 15 V; pin 16 is the positive supply and pin 8 is GND. You can shorten the count by connecting one of the outputs to the reset pin. It is usually paired with a 555 in running light, electronic dice and sequential switching circuits.