CD4520 Binary Counter
Komponentlar

CD4520 Binary Counter

0.0(0)
The CD4520 is a 16-pin (DIP-16) CMOS counter IC with two separate 4-bit binary up-counters (A and B). Each counter counts from 0 to 15, then rolls over to 0. While the ENABLE input is 1, every rising edge on the clock input adds one to the count. Counter A has its clock on pin 1, enable on pin 2, outputs Q1 to Q4 on pins 3 to 6 and reset on pin 7; counter B has its clock on pin 9, enable on pin 10, outputs on pins 11 to 14 and reset on pin 15. Q1, Q2, Q3 and Q4 are worth 1, 2, 4 and 8. When the reset pin is 1, all four outputs go to 0; normally it is held at GND. With the clock input held at 0, a falling edge on the enable input also counts: tie the second counter's clock input to GND and its enable input to the first counter's Q4 output, and the pair counts from 0 to 255. It runs from 3 to 18 V; pin 16 is the positive supply (VDD) and pin 8 is GND. At 5 V the outputs are weak: one output gives an LED with a 1 kΩ resistor about 1 to 2 mA. Tie unused inputs to GND or to the positive supply. It is used in binary counters, frequency dividers and timers.