DS1307 RTC Module
Komponentlar

DS1307 RTC Module

4.4(17)
34
It is a real-time clock (RTC) module with DS1307 chip. It works with I2C communication protocol and connects to A4 (SDA) and A5 (SCL) pins of Arduino. Thanks to the CR2032 battery on it, it continues to maintain the time and date information even if the Arduino is de-energized. It provides uninterrupted time tracking for projects by keeping seconds, minutes, hours, days, months and years. It is widely used in projects such as data storage, alarm systems, automatic irrigation and timers.

Bu komponent ishlatiladigan loyihalar

Dot Matrix Clock and Calendar (MAX7219, DS1307)
AR-84O‘rta
Premium

Dot Matrix Clock and Calendar (MAX7219, DS1307)

A glowing board for your desk or wall that shows the time and date in scrolling text.

5.0(37)
59
Dot Matrix Clock, Calendar and Weather Station (MAX7219, DS1307)
AR-85O‘rta
Premium

Dot Matrix Clock, Calendar and Weather Station (MAX7219, DS1307)

A scrolling-text board for your desk or wall that shows the time, the date and the room's weather in turn.

5.0(50)
66
Digital Clock with ESP32 and DS1307 RTC (I2C + LCD)
ES-18O‘rta
Premium

Digital Clock with ESP32 and DS1307 RTC (I2C + LCD)

In this project, we display the time and date on a 16x2 I2C LCD screen using the DS1307 real-time clock (RTC) module. The DS1307 is a battery-backed RTC that maintains the time even if the ESP32 is powered off. Both modules share the same I2C bus (SDA/SCL), allowing us to learn how to control multiple devices using just two signal wires. Through this project, you will gain practical knowledge of the I2C communication protocol, RTC module operation, and dynamic data display on an LCD screen.

4.6(26)
40
ESP32 Temperature Data Logger (DHT22 + DS1307 RTC + microSD + OLED)
ES-40Yuqori
Premium

ESP32 Temperature Data Logger (DHT22 + DS1307 RTC + microSD + OLED)

Build a timed temperature and humidity logger with the ESP32! A DHT22 sensor reads temperature and humidity once a minute, and each reading is saved to a microSD card in CSV format with a real-time stamp from the DS1307 RTC module. The OLED display shows the latest temperature, humidity, timestamp and total number of records live, in large text.

4.7(7)
12
Raspberry Pi Pico Alarm Desk Clock (DS1307 + TM1637 + Buzzer)
PI-38O‘rta
Premium

Raspberry Pi Pico Alarm Desk Clock (DS1307 + TM1637 + Buzzer)

A desk clock that keeps time even through a power cut! The Raspberry Pi Pico reads the time from a battery-backed DS1307 real-time clock, and a TM1637 display shows hours:minutes with a blinking colon. When the alarm time comes, the buzzer plays double beeps and the display pulses; one button snoozes it for 5 minutes. The alarm lives in the DS1307's battery-backed memory, and the display dims itself at night.

Arduino Automatic School Bell (DS1307 + I2C LCD + Relay)
AR-118O‘rta
Premium

Arduino Automatic School Bell (DS1307 + I2C LCD + Relay)

Now the Arduino rings the school bell! A DS1307 keeps the time, and the lesson, break, lunch and home-time bells ring on their own from a schedule table. A relay drives the real bell, a buzzer plays a different tune for each bell type and an I2C LCD counts down to the next bell. It also has exam and holiday modes, a manual bell, clock setting with two buttons and the Turkish National Anthem for the Monday and Friday ceremonies.

Arduino NeoPixel Ring Clock (DS1307 + 24 LED Ring + LDR)
AR-130O‘rta
Premium

Arduino NeoPixel Ring Clock (DS1307 + 24 LED Ring + LDR)

A wall clock with hands made of light! On a 24-LED NeoPixel ring, red light shows the hour, green the minute and a blue comet the second; the hands glide between two LEDs and the colours blend where they overlap. A DS1307 keeps the time on a coin cell, and an LDR sets the brightness from the room light and switches to night red in the dark. On the hour the buzzer chimes once per hour, and four themes are kept in EEPROM.

Raspberry Pi Pico Pill Reminder (DS1307 RTC + OLED Display + 3 LEDs + Buzzer)
PI-52O‘rta
Premium

Raspberry Pi Pico Pill Reminder (DS1307 RTC + OLED Display + 3 LEDs + Buzzer)

A reminder box for morning, noon and evening pills! The battery-backed DS1307 clock keeps the time through power cuts; when a dose is due, that compartment's LED blinks, a passive buzzer plays a soft tune and the OLED shows MORNING PILL. If nobody presses TAKEN within 15 minutes, the dose counts as missed. The menu shows today's list and the adherence of the last 7 days, and the OLED and clock share the same two I2C wires.

ESP32 Exam Countdown and Study Tracker (DS1307 + I2C LCD + 2 Buttons + Buzzer)
ES-83Boshlang‘ich
Premium

ESP32 Exam Countdown and Study Tracker (DS1307 + I2C LCD + 2 Buttons + Buzzer)

A desk counter for students facing a big exam: the I2C LCD shows the days left to the exam and today's study time. The START button starts and pauses a 25 minute session, a 5 minute break begins by itself when it ends, and the buzzer calls you back when the break is over. At midnight the DS1307 clock moves to a new day, the daily time resets and the countdown drops by one.

ESP32 Moon Phase Lamp: What Does the Moon Look Like Tonight? (DS1307 + 8x8 NeoPixel + Button)
ES-91O‘rta
Premium

ESP32 Moon Phase Lamp: What Does the Moon Look Like Tonight? (DS1307 + 8x8 NeoPixel + Button)

A night lamp for your desk that draws tonight's moon: an 8x8 NeoPixel matrix shows a crescent, a quarter, a gibbous or a full moon. The DS1307 keeps the date, and the ESP32 counts the phase from a known new moon and corrects it with Meeus' terms to within a minute. One button switches between today, days to full moon and a whole month played in 8 seconds. 24 December 2026 is the last full moon of the year.

ESP32 Sunrise Alarm Clock: Wake Up Gently with Light (DS1307 + LED Ring + LCD)
ES-94O‘rta
Premium

ESP32 Sunrise Alarm Clock: Wake Up Gently with Light (DS1307 + LED Ring + LCD)

Getting up in the dark on a winter morning is hard. 20 minutes before the alarm this clock slowly lights a 24-LED ring from the bottom up: deep red first, then orange, warm white at the end. At alarm time the buzzer plays birdsong. The PLUS button snoozes for 5 minutes, the SET button silences it. A battery-backed DS1307 keeps the time and the alarm is stored on the board, so neither is lost in a power cut. The LCD shows the time, the alarm and the sunrise percentage.

Santa Trap: What Time Did He Come? (Arduino + PIR + DS1307 + LCD)
AR-158O‘rta
Premium

Santa Trap: What Time Did He Come? (Arduino + PIR + DS1307 + LCD)

The trap arms itself when the light goes off. If the PIR sees motion, the time is read from the DS1307 and saved, and the servo camera swings left and right; all night the I2C LCD gives nothing away. When the light returns in the morning, the screen shows the time of the first visit and how many visits there were. Night/day sensing with an LDR and hysteresis, PIR rising edge detection and non-blocking servo motion with millis() are in the code.