MicroSD Memory Card
Komponentlar

MicroSD Memory Card

0.0(0)
3
A microSD memory card is a fingertip-sized (15 x 11 mm) flash memory card. In microcontroller projects it stores photos, sound files and measurement logs (data logging). Some boards such as the ESP32-CAM have their own microSD slot; on the Arduino and the Raspberry Pi Pico the card connects over SPI through a MicroSD Card Module. For hobby projects 4–32 GB microSDHC cards fit best: the Arduino and ESP32 SD libraries read the card in FAT32 format. Cards of 64 GB and above usually come formatted as exFAT and must be formatted as FAT32 first. The speed class (Class 10, U1) sets the write speed but makes no difference in small projects. The card runs on 3.3 V and must not be connected straight to a 5 V pin. Cutting the circuit's power before inserting or removing the card keeps the files from getting corrupted. It is used in MP3 playback with the DFPlayer Mini, weather station logs and photo saving with the ESP32-CAM.

Bu komponent ishlatiladigan loyihalar

ESP32-CAM Camera That Takes Photos When It Sees Motion (PIR + microSD)
ES-105O‘rta
Premium

ESP32-CAM Camera That Takes Photos When It Sees Motion (PIR + microSD)

A battery-powered motion camera for a bird box or the front door. When the HC-SR501 PIR sees motion, the ESP32-CAM wakes from deep sleep, takes three photos and saves them in order on the board's own microSD slot as foto_0001.jpg, foto_0002.jpg. The photo number lives in EEPROM, so the order survives a battery change. When the motion is over the board goes back to sleep; no Wi-Fi or app needed.

Arduino Talking Distance Robot: A Robot That Talks When You Come Closer (HC-SR04 + DFPlayer Mini + Speaker)
AR-174O‘rta
Premium

Arduino Talking Distance Robot: A Robot That Talks When You Come Closer (HC-SR04 + DFPlayer Mini + Speaker)

A robot that stays quiet while nobody is around and talks with a real voice when someone comes closer. The HC-SR04 measures the distance and the DFPlayer Mini plays MP3 files from a microSD card through a speaker: "Hello! I'm the BlueGrays robot." at 150 cm, "You're a bit close." at 60 cm, "Too close, step back!" at 20 cm and "See you!" when you leave. Each band has two sentences that take turns. A median filter and hysteresis stop it chattering at a border.

Arduino MP3 Player: A Music Player With Buttons and a Volume Knob (DFPlayer Mini + Potentiometer + Speaker)
AR-175O‘rta
Premium

Arduino MP3 Player: A Music Player With Buttons and a Volume Knob (DFPlayer Mini + Potentiometer + Speaker)

An MP3 player for your own music with three buttons and a volume knob. The DFPlayer Mini plays MP3 files from a microSD card through a speaker. The previous, play/pause and next buttons move between tracks, and the potentiometer sets the volume from 0 to 30. When a track ends the next one starts, and after the last it goes back to the first. A long press on play turns on shuffle. The Serial Monitor shows the track and the volume.