MPU-6050
Komponentlar

MPU-6050

4.7(18)
25
The MPU-6050 is a motion sensor with a 3-axis accelerometer and 3-axis gyroscope in a single module. It is also known as a 6-DOF sensor because it offers a total of 6 degrees of freedom. It easily communicates with Arduino and ESP series boards via I2C protocol. It is widely used in projects that require direction and motion perception such as balance robots, drone flight control, pedometer and hand gesture recognition.

Bu komponent ishlatiladigan loyihalar

Arduino Tilt-Controlled Digital Sand (MPU-6050 + 8x8 NeoPixel Matrix)
AR-99O‘rta
Premium

Arduino Tilt-Controlled Digital Sand (MPU-6050 + 8x8 NeoPixel Matrix)

LED sand that flows whichever way you tilt the circuit! The MPU-6050 accelerometer measures the tilt, and 24 grains on the 8x8 NeoPixel matrix fall toward gravity and pile up at the edges like real sand. A theme button switches between sand, water, lava and rainbow colors. Library-free I2C reading, turning tilt into a gravity direction and a simple falling-sand algorithm in one project.

Arduino Tilt Marble Maze (MPU-6050 + MAX7219 8x8 LED Matrix)
AR-103O‘rta
Premium

Arduino Tilt Marble Maze (MPU-6050 + MAX7219 8x8 LED Matrix)

No screen, no joystick: tilt the circuit and an LED marble rolls through a maze! The MPU-6050 accelerometer measures the tilt, and the marble on the MAX7219 8x8 LED matrix rolls that way without passing through walls. Reach the goal and a passive buzzer plays a tune as the next maze opens; finish all 3 for a smiley. Library-free sensor reading, tilt-to-speed control and mazes written as text in one project.

ESP32 Earthquake Shake Alarm (MPU-6050 + OLED Display + Buzzer)
ES-45O‘rta
Premium

ESP32 Earthquake Shake Alarm (MPU-6050 + OLED Display + Buzzer)

When your desk shakes, this screen notices first! The ESP32 measures vibration with an MPU-6050 accelerometer and draws a live trace that scrolls like a seismograph on a 0.96-inch OLED display. When the shaking passes the threshold, a passive buzzer sounds a siren and the red LED flashes; one button silences and resets it. It is an educational shake meter, not an official earthquake warning.

5.0(1)
Raspberry Pi Pico Shake Dice (MPU-6050 + OLED Display + Buzzer)
PI-27O‘rta
Premium

Raspberry Pi Pico Shake Dice (MPU-6050 + OLED Display + Buzzer)

Lost your dice? No problem: shake the circuit and the die rolls on a 0.96 inch OLED! An MPU-6050 accelerometer senses the shake, the die wobbles and spins, and once you stop it slows down and lands on a face. The MODE button switches between one die and two; roll a double and the screen flashes while the buzzer plays a celebration tune. The Raspberry Pi Pico reads the sensor straight over I2C, no library needed.

Raspberry Pi Pico Digital Spirit Level (MPU-6050 + OLED Display)
PI-35O‘rta
Premium

Raspberry Pi Pico Digital Spirit Level (MPU-6050 + OLED Display)

Shelf up, but is it straight? We are building a digital spirit level with a Raspberry Pi Pico. The MPU-6050 measures gravity, and the OLED shows a bubble in a bullseye plus the X / Y tilt. Stand the board on its edge and the display turns into a classic tube level. Below 0.5° the display lights LEVEL, and just like a real one, the bubble drifts to the higher side.

Arduino Tilt Arrow (MPU-6050 + MAX7219 8x8 LED Matrix)
AR-113O‘rta
Premium

Arduino Tilt Arrow (MPU-6050 + MAX7219 8x8 LED Matrix)

Tilt the circuit and the arrow turns to follow! We are building a tilt arrow that points downhill with an Arduino, an MPU-6050 accelerometer and a MAX7219 8x8 LED matrix. The arrow turns in 8 directions, grows as the tilt increases and blinks when it gets very steep. When the circuit is level, a pulsing level sign appears, and the angle and direction are printed to the serial monitor too.

Arduino Hourglass (2x MAX7219 8x8 LED Matrix + MPU-6050)
AR-114O‘rta
Premium

Arduino Hourglass (2x MAX7219 8x8 LED Matrix + MPU-6050)

The sand is not real, but flip it and it runs back! We are building a digital hourglass with an Arduino, two MAX7219 8x8 LED matrices and an MPU-6050. Grains in the upper bulb drop one by one through a narrow neck and pile up below. Flip it and the sand flows back, lay it flat and it pauses; when time is up, the lower bulb blinks.

Arduino Light Saber (MPU-6050 + WS2812B LED Strip + Buzzer)
AR-125O‘rta
Premium

Arduino Light Saber (MPU-6050 + WS2812B LED Strip + Buzzer)

Press the button and the light shoots from the hilt to the tip with a "vzzz"! A 30-LED WS2812B strip is the blade, an MPU-6050 measures how fast the sword turns and when it hits something, and a passive buzzer plays the hum. Swing it and the hum rises while the blade glows brighter; hit something and it flashes white with a crackle. A long press cycles through six colours, and your pick is remembered after power-off.

Raspberry Pi Pico Step Counter: Pedometer (MPU-6050 + OLED + Buzzer)
PI-51O‘rta
Premium

Raspberry Pi Pico Step Counter: Pedometer (MPU-6050 + OLED + Buzzer)

See how smart watches count your steps, on your own circuit! The Raspberry Pi Pico reads the MPU-6050 accelerometer 50 times a second, smooths the signal and counts the peak each step makes. The 0.96 inch OLED shows steps, distance, calories and cadence, and a live graph page draws the raw signal, the average and the threshold on top of each other. At the goal the buzzer plays a tune, and the count is saved to flash.

ESP32 Camera Gimbal (MPU-6050 + 2 Servos + OLED)
ES-64O‘rta
Premium

ESP32 Camera Gimbal (MPU-6050 + 2 Servos + OLED)

Discover the secret of phone gimbals yourself! As the handle tilts, the MPU-6050 measures the angle and two SG90 servos turn the opposite way to keep the platform on top level. The angle is worked out 200 times a second with a complementary filter that blends gyroscope and accelerometer. The 0.96 inch OLED draws an artificial horizon like an aircraft gauge, and one button switches between LOCK, FOLLOW and CENTER.

Raspberry Pi Pico W Laundry Done Notifier (MPU-6050 + TM1637 + Buzzer)
PI-61O‘rta
Premium

Raspberry Pi Pico W Laundry Done Notifier (MPU-6050 + TM1637 + Buzzer)

A little box that tells your phone when the laundry is done! The Raspberry Pi Pico W measures vibration with an MPU-6050 sitting on top of the machine; while it runs, the TM1637 display counts the time and a blue LED lights up during the spin. After 3 minutes without vibration, a green LED comes on, the buzzer double-beeps and a "laundry done" notification with the run time lands on your phone. If you don't confirm, a second reminder follows 10 minutes later.

Pico Sleep Tracker: How Many Times Did You Turn Last Night? (MPU-6050 + OLED)
PI-92O‘rta
Premium

Pico Sleep Tracker: How Many Times Did You Turn Last Night? (MPU-6050 + OLED)

An MPU-6050 under your pillow watches the pillow's tilt all night. If the sensor shakes and comes back to the same posture it counts a move; if it settles at a new tilt it counts a turn. Events are logged hour by hour, and in the morning the OLED screen shows an hourly bar chart of the night and a sleep score from 0 to 100. One button starts the night, flips the report pages and ends the night when you hold it. The screen switches itself off while you sleep.