Bu komponent ishlatiladigan loyihalar

Motion Detector with Motion Sensor
A simple guard that tells you when someone walks into the room. The motion sensor picks up the warmth given off by the human body, and the Arduino keeps the LED on as long as there is movement and…

Doorbell and Light with Motion Sensor
When someone comes up to your door, you know before they even ring. As soon as the motion sensor spots someone, the LED lights up and the buzzer plays a three-note chime from high to low; when the…

ESP32 Motion Alarm System (PIR + Buzzer + LED + Telegram)
A smart security alarm: when the PIR sensor detects motion, it sounds the buzzer, lights the LED and sends the owner an instant Telegram notification. A 30-second cooldown limits how often the alarm repeats; it does not filter out the PIR sensor's false detections. Use it at home, in a garage, a storeroom or a study.

Automatic Lighting with the ESP32 PIR Motion Sensor
In this project an HC-SR501 PIR motion sensor detects someone entering the room and turns on an LED automatically. millis() tracks how long the LED stays on: each HIGH reading refreshes the last-motion time, and the LED turns off at least 10 seconds after the last HIGH. The code also waits 50 ms with delay(50) in every loop, so the loop is not fully non-blocking. Great for stairs, hallways, bathrooms or closet lighting.

ESP32 Smart Lighting (PIR + LDR + Relay + OLED)
With an ESP32, a PIR motion sensor, an LDR light sensor and a relay module, we turn your hallway, bathroom or pantry into smart lighting. If the room is already bright, the light stays off even when there is motion, so it never wastes energy during the day. The light stays on for 30 seconds, and the time extends automatically while motion continues.

Raspberry Pi Pico PIR Motion Alarm (PIR Sensor + Buzzer + LED)
Walk in once and you get a warning, walk in again and the siren goes off! We are building a two-stage motion alarm with a Raspberry Pi Pico and a PIR motion sensor. It arms itself after a countdown. The first motion plays a ding-dong warning on the buzzer; a second motion within 15 seconds sounds the siren and strobes the LED. Afterwards it re-arms on its own and logs every event with a timestamp.

ESP32 Automatic Cat Toy (PIR + 2 Servos + LDR + Buzzer)
Keep your cat busy while it is home alone! When the PIR sensor spots the cat, the buzzer chirps like a bird and a feather wand on two SG90 servos moves like prey: mouse dash, hide and seek, zigzag, circle and bug jitter. A game lasts one minute, then the toy rests; when the LDR sees darkness it never plays at night. The moves come from the ESP32's hardware randomness, so the cat cannot learn them.

Raspberry Pi Pico W Red Light, Green Light: The Doll That Catches Whoever Moves (PIR + Servo + Buzzer)
The children's game made world famous by TV series, right on your desk: on green light the doll turns its back and plays our own tune while you creep forward. When the tune ends the servo head turns, the red light comes on and a PIR sensor catches anyone who moves: the alarm goes off and the doll shakes its head. The tune gets faster and changes length every round; freeze through 5 rounds with a Raspberry Pi Pico W or touch the doll on green to win.

Pico W IoT Motion Counter (PIR)
Count how many times someone walks through a door or hallway, and see the moment of motion live on your phone. This project is the step-by-step guide to the Motion detector IoT template in the app, built with a Raspberry Pi Pico W and a PIR motion sensor using just 3 wires. Go to Workshop › Devices › Add a device; Ohmi prepares the code with your own device key. The code on this page is an example: the key and Wi-Fi details are placeholders.

ESP32-CAM Camera That Takes Photos When It Sees Motion (PIR + microSD)
A battery-powered motion camera for a bird box or the front door. When the HC-SR501 PIR sees motion, the ESP32-CAM wakes from deep sleep, takes three photos and saves them in order on the board's own microSD slot as foto_0001.jpg, foto_0002.jpg. The photo number lives in EEPROM, so the order survives a battery change. When the motion is over the board goes back to sleep; no Wi-Fi or app needed.

ESP32-CAM Telegram Security Camera
When your door opens or something moves in the room, the ESP32-CAM takes a photo and your Telegram bot sends it to your phone. A reed switch and magnet guard the door, a PIR HC-SR501 watches the room. Type /photo to the bot for a photo on demand; /flash on, /alarm off and /status run the camera from anywhere. The bot only listens to your own chat id. You get the token from @BotFather; the steps are in the FAQ.

Santa Trap: What Time Did He Come? (Arduino + PIR + DS1307 + LCD)
The trap arms itself when the light goes off. If the PIR sees motion, the time is read from the DS1307 and saved, and the servo camera swings left and right; all night the I2C LCD gives nothing away. When the light returns in the morning, the screen shows the time of the first visit and how many visits there were. Night/day sensing with an LDR and hysteresis, PIR rising edge detection and non-blocking servo motion with millis() are in the code.

