AR-45Boshlang‘ich

DS1302 RTC soat modulini sozlash

4.5(23)
31 bajarildi
DS1302 RTC soat modulini sozlash
Arduino o‘chirilganda ham vaqtni hech qachon unutmaydigan kichik soat modulini ishga tushirasan. Modulning o‘z kichkina batareyasi bor; soat bir marta sozlangach, sana va vaqt har soniyada kompyuter ekraningga chiqadi. Budilniklar, taymerlar va jurnal yuritadigan har bir loyiha shu qadamdan boshlanadi.

Video

Elektr sxemasi

DS1302 RTC soat modulini sozlash - Elektr sxemasi

Manba kodi

C++ (Arduino IDE)
1// ─────────────────────────────────────────
2//   BlueGrays · bluegrays.com
3//   DS1302 RTC Clock Module Setup
4// ─────────────────────────────────────────
5// If the RTC's time is invalid (new module, flat battery) it writes the
6// compile date and time to the DS1302 once, then prints the date and time
7// to the Serial Monitor every second. The module's battery keeps the time
8// with the power off; later starts do not set it again.
9//
10// Pins:
11//   D6 -> RTC CLK
12//   D7 -> RTC DAT
13//   D8 -> RTC RST
14//   RTC VCC to 5V, GND to GND
15
16#include <virtuabotixRTC.h>   // DS1302 library
17
18// Pins: CLK, DAT, RST
19virtuabotixRTC myRTC(6, 7, 8);
20
21void setup() {
22  Serial.begin(9600);   // Serial at 9600 baud
23
24  // Read the RTC first. A year below 2024 or a month outside 1-12 means the time was never set;
25  // write the compile time. If it is valid leave it, so uploading again or power cycling the
26  // Arduino keeps the time.
27  myRTC.updateTime();
28  if (myRTC.year < 2024 || myRTC.month < 1 || myRTC.month > 12) {
29    setFromCompileTime();
30  }
31}
32
33// Writes the compile time (__DATE__ "Oct 28 2026", __TIME__ "13:42:15") to the RTC. Uploading takes
34// a few seconds, so the clock starts that far behind.
35void setFromCompileTime() {
36  const char *date = __DATE__;
37  const char *time = __TIME__;
38  const char *months = "JanFebMarAprMayJunJulAugSepOctNovDec";
39  char monthName[4] = {date[0], date[1], date[2], '\0'};
40
41  int month = (strstr(months, monthName) - months) / 3 + 1;   // "Oct" -> 10
42  int day = atoi(date + 4);
43  int year = atoi(date + 7);
44  int hour = atoi(time);
45  int minute = atoi(time + 3);
46  int second = atoi(time + 6);
47
48  // Day of the week (Sakamoto's method), 0 = Sunday
49  int offsets[] = {0, 3, 2, 5, 0, 3, 5, 1, 4, 6, 2, 4};
50  int y = year - (month < 3);
51  int weekday = (y + y / 4 - y / 100 + y / 400 + offsets[month - 1] + day) % 7;
52  if (weekday == 0) {
53    weekday = 7;   // Monday = 1 ... Sunday = 7
54  }
55
56  // Order: s, min, h, weekday, day, month, year
57  myRTC.setDS1302Time(second, minute, hour, weekday, day, month, year);
58}
59
60void loop() {
61  // Read the current time from the RTC module
62  myRTC.updateTime();
63
64  // Print the time (day/month/year h:m:s)
65  Serial.print("Current Date/Time: ");
66  Serial.print(myRTC.dayofmonth);
67  Serial.print("/");
68  Serial.print(myRTC.month);
69  Serial.print("/");
70  Serial.print(myRTC.year);
71  Serial.print("  ");
72  Serial.print(myRTC.hours);
73  Serial.print(":");
74  Serial.print(myRTC.minutes);
75  Serial.print(":");
76  Serial.println(myRTC.seconds);
77
78  delay(1000);   // Wait 1 s
79}
80

Ko‘p so‘raladigan savollar

RTC moduli nima qiladi?

Real vaqt soati (RTC) moduli ichidagi batareya tufayli Arduino o‘chiq bo‘lganda ham vaqt va sanani saqlab turadi. Arduinoning millis() hisoblagichi har safar quvvat berilganda nolga qaytgani uchun aniq vaqt ma’lumoti uchun RTC kerak.

Vaqtni faqat bir marta sozlash yetarlimi?

Ha. Kod avval moduldan vaqtni o‘qiydi; agar u hech qachon sozlanmagan bo‘lsa, kodni kompilyatsiya qilgan paytingdagi sana va vaqtni bir marta yozadi. Vaqt to‘g‘ri bo‘lsa, unga tegmaydi, shuning uchun qayta yuklash yoki Arduinoni o‘chirib-yoqish soatni buzmaydi. Hech qaysi qatorni qo‘lda izohga aylantirishing shart emas.

Soat orqada qolyapti. Bu normalmi?

DS1302 kvars asosida ishlaydi va kuniga bir necha soniyaga adashishi mumkin. Aniqroq soat uchun harorat kompensatsiyali DS3231 moduli tavsiya etiladi (yiliga taxminan ±1 daqiqa).

Moduldagi batareya tugasa nima bo‘ladi?

Arduino quvvat olib turgan ekan, soat ishlayveradi; quvvat uzilsa va batareya tugagan bo‘lsa, soat nolga qaytadi va uni qayta sozlash kerak bo‘ladi. CR2032 batareya odatda bir necha yil yetadi.