ES-35YuqoriPremium
ESP32 RFID Door Lock (RC522 + Servo + OLED + Buzzer + LED)
We build a smart door lock with an ESP32, an RC522 RFID module, an SG90 servo, an SSD1306 OLED display, an active buzzer and 2 LEDs. When a card is scanned, its UID is checked against the authorized cards defined in the code; if it matches, the servo unlocks (green LED + 2 short beeps) and locks again after 5 seconds. An unknown card lights the red LED, gives 3 quick beeps and shows its UID on the OLED.
4.8(9)
16 bajarildi
Build a door lock that opens with a card instead of a key. Hold a registered card near the reader and a welcome message pops up on a small OLED screen, the green light comes on, the servo motor unlocks, and five seconds later it locks again on its own. If an unknown card shows up, the red light comes on, it beeps three times and the screen says access denied.
Manba kodi
Premium kontent
Bu loyihaning manba kodi, blokli ko‘rinishi va ko‘p so‘raladigan savollari Premium a’zolar uchun ochiq.
- Barcha loyiha kodlari
- Blokli ko‘rinish
- Ko‘p so‘raladigan savollar
