Loyihalar · Arduino / ESP32 / Pico

Arduino loyihalarini kashf qil

Boshlang‘ichdan yuqori darajagacha, sxemali, kodli va videoli yuzlab loyihalar. Qaysi darajada bo‘lsang, o‘sha yerdan boshla.

Pico W IoT Temperature and Humidity (DHT22)
PI-96Boshlang‘ich
IoT

Pico W IoT Temperature and Humidity (DHT22)

Watch your room's temperature and humidity live on your phone wherever you are. This project is the step-by-step guide to the Temperature and humidity IoT template in the app, built with a Raspberry Pi Pico W and a DHT22. Go to Workshop › Devices › Add a device, pick Pico W as the board and Temperature and humidity as the template; Ohmi prepares the code with your own device key. The code on this page is an example: the key and Wi-Fi details are placeholders.

1
Pico W IoT Door Sensor (Reed Switch)
PI-97Boshlang‘ich
IoT

Pico W IoT Door Sensor (Reed Switch)

Did you leave the door or window open? Check on your phone wherever you are. This project is the step-by-step guide to the Door / window IoT template in the app, built with a Raspberry Pi Pico W, a reed switch and a small magnet using two wires. Go to Workshop › Devices › Add a device, pick Pico W as the board and Door / window as the template; Ohmi prepares the code with your own device key. The code on this page is an example: the key and Wi-Fi details are placeholders.

1
Pico W IoT Motion Counter (PIR)
PI-98Boshlang‘ich
IoT

Pico W IoT Motion Counter (PIR)

Count how many times someone walks through a door or hallway, and see the moment of motion live on your phone. This project is the step-by-step guide to the Motion detector IoT template in the app, built with a Raspberry Pi Pico W and a PIR motion sensor using just 3 wires. Go to Workshop › Devices › Add a device; Ohmi prepares the code with your own device key. The code on this page is an example: the key and Wi-Fi details are placeholders.

ESP32-CAM Wi-Fi Live Camera
ES-104Boshlang‘ich
Premium

ESP32-CAM Wi-Fi Live Camera

A live camera on your phone with a palm-sized board: the ESP32-CAM joins your home Wi-Fi and serves its own web page. Type the address from the Serial Monitor into your phone's browser and the live picture (MJPEG stream) appears. A button on the page turns the on-board flash LED on and off, and a list picks the resolution from 320x240 up to 1280x720. You upload the code with a CH340 USB-TTL adapter; one jumper between IO0 and GND while uploading is all it takes.

5.0(1)
The Counter That Never Misses: Interrupt or Loop? (Arduino + TM1637)
AR-166Boshlang‘ich
Premium

The Counter That Never Misses: Interrupt or Loop? (Arduino + TM1637)

An interrupt and the loop both watch the same button: on the TM1637 display the loop's count sits on the left, the interrupt's on the right. While the loop does a slow 300 ms job it misses most fast presses (only 7 of 18 in the video), the interrupt misses none. With the MODE button you set the slow job to 0, 100 or 300 ms and measure the difference yourself. Covers attachInterrupt, volatile and safe reading.

UNO R4 WiFi LED Matrix Text and Animation
AR-169Boshlang‘ich
Premium

UNO R4 WiFi LED Matrix Text and Animation

The 12x8 LED matrix on the UNO R4 WiFi needs no extra parts at all. In this project a message scrolls across the matrix from right to left, then a heart beats three times and a smiley winks. Type your own message in the Serial Monitor, press Enter and it scrolls instead. You learn text scrolling with ArduinoGraphics and drawing your own animation frames as 8x12 arrays.

ESP32 Bluetooth Car (L298N)
ES-107Boshlang‘ich
Bluetooth

ESP32 Bluetooth Car (L298N)

Drive a two-wheel car over Bluetooth with the joystick on your phone; no internet needed, works on iPhone and Android. This project is the step-by-step guide to the Car remote Bluetooth template in the app, built with an ESP32, an L298N and two motors. Go to Workshop › Devices › Add a device › Bluetooth, pick Car remote and upload the code from Get the code. The Set up as a Bluetooth panel button on this page opens the wizard with this template.

1
ESP32 Bluetooth LED and Relay
ES-108Boshlang‘ich
Bluetooth

ESP32 Bluetooth LED and Relay

Switch an LED and a relay on and off from your phone over Bluetooth, no internet or Wi-Fi needed. This project is the step-by-step guide to the LED and relay Bluetooth template in the app, built with an ESP32 and a 5 V relay module. Go to Workshop › Devices › Add a device › Bluetooth, pick LED and relay and upload the code with Get the code. The Set up as a Bluetooth panel button on this page opens the wizard with this template too.

ESP32 Bluetooth Temp and Humidity (DHT11)
ES-109Boshlang‘ich
Bluetooth

ESP32 Bluetooth Temp and Humidity (DHT11)

Watch your room's temperature and humidity live on your phone with an ESP32 and a DHT11 sensor: two reading boxes and a chart update every 2 seconds, no internet needed. This project is the step-by-step guide for the Temperature and humidity Bluetooth template in the app. Go to Workshop › Devices › Add a device › Bluetooth, pick the template and upload the code with Get the code. The Set up as a Bluetooth panel button on this page opens the wizard ready to go.

ESP32 Bluetooth Servo Lock
ES-111Boshlang‘ich
Bluetooth

ESP32 Bluetooth Servo Lock

Control an SG90 servo as a small latch from your phone over Bluetooth: lock, open or set the angle, no internet or Wi-Fi needed. This project is the step-by-step guide to the Servo lock Bluetooth template in the app, built with an ESP32, one servo and 3 wires. Go to Workshop › Devices › Add a device › Bluetooth, pick Servo lock and upload the code with Get the code. The Set up as a Bluetooth panel button on this page opens the wizard with this template too.

ESP32 Bluetooth Text on an LCD
ES-112Boshlang‘ich
Bluetooth

ESP32 Bluetooth Text on an LCD

Type a message on your phone and it shows up on a 16x2 LCD over Bluetooth, no internet or Wi-Fi needed. This project is the step-by-step guide to the Text on an LCD Bluetooth template in the app, built with an ESP32 and an I2C LCD. Go to Workshop › Devices › Add a device › Bluetooth, pick Text on an LCD and upload the code with Get the code. The Set up as a Bluetooth panel button on this page opens the wizard with this template too.

ESP32 Bluetooth Parking Sensor (HC-SR04)
ES-113Boshlang‘ich
Bluetooth

ESP32 Bluetooth Parking Sensor (HC-SR04)

Measure the distance to an obstacle with an HC-SR04 and watch it on your phone; the buzzer beeps faster as it gets closer. No internet needed. This is the step-by-step guide to the Parking sensor Bluetooth template in the app, built with an ESP32. Go to Workshop › Devices › Add a device › Bluetooth, pick Parking sensor and upload the code with Get the code. The Set up as a Bluetooth panel button on this page opens the wizard with this template too.