Arduino loyihalarini kashf qil
Boshlang‘ichdan yuqori darajagacha, sxemali, kodli va videoli yuzlab loyihalar. Qaysi darajada bo‘lsang, o‘sha yerdan boshla.

ESP32 Frost Alarm: Will the Windshield Freeze Tomorrow Morning? (DHT22 + I2C LCD + 2 LEDs + Buzzer)
No more scraping the car window at 7 am: the DHT22 measures outdoor temperature and humidity, the ESP32 works out the dew point and tells you whether the windshield will freeze tonight. The I2C LCD shows temperature, humidity and dew point; green LED means SAFE, blinking red RISK, steady red plus a buzzer alarm FROST. If the air cooled fast in the last hour, it warns you about the night too.

ESP32 Plank Coach: Beeps When Your Hips Drop (MPU-6050 + I2C LCD + Buzzer)
An MPU-6050 taped to your back watches the angle of your body while the ESP32 counts your plank time on the LCD. If your hips drop it warns with low beeps, if they rise with high beeps, and the time pauses right there; fix your form and it carries on. Fail to recover within 3 seconds and the plank ends with your time on the screen. Your best time is stored on the board as the record and survives unplugging. An honest training partner for a New Year fitness resolution.

ESP32 IoT Lamp Switch (Relay)
Turn your lamp on and off from your phone, wherever you are. This project is the step-by-step guide to the Relay lamp IoT template in the app, built with an ESP32 and a relay module and tried with an LED first. Go to Workshop › Devices › Add a device and pick Relay lamp; Ohmi prepares the code with your own device key. The code on this page is an example: the key and Wi-Fi details are placeholders.

ESP32-CAM Wi-Fi Live Camera
A live camera on your phone with a palm-sized board: the ESP32-CAM joins your home Wi-Fi and serves its own web page. Type the address from the Serial Monitor into your phone's browser and the live picture (MJPEG stream) appears. A button on the page turns the on-board flash LED on and off, and a list picks the resolution from 320x240 up to 1280x720. You upload the code with a CH340 USB-TTL adapter; one jumper between IO0 and GND while uploading is all it takes.

ESP32 Bluetooth Car (L298N)
Drive a two-wheel car over Bluetooth with the joystick on your phone; no internet needed, works on iPhone and Android. This project is the step-by-step guide to the Car remote Bluetooth template in the app, built with an ESP32, an L298N and two motors. Go to Workshop › Devices › Add a device › Bluetooth, pick Car remote and upload the code from Get the code. The Set up as a Bluetooth panel button on this page opens the wizard with this template.

ESP32 Bluetooth LED and Relay
Switch an LED and a relay on and off from your phone over Bluetooth, no internet or Wi-Fi needed. This project is the step-by-step guide to the LED and relay Bluetooth template in the app, built with an ESP32 and a 5 V relay module. Go to Workshop › Devices › Add a device › Bluetooth, pick LED and relay and upload the code with Get the code. The Set up as a Bluetooth panel button on this page opens the wizard with this template too.

ESP32 Bluetooth Temp and Humidity (DHT11)
Watch your room's temperature and humidity live on your phone with an ESP32 and a DHT11 sensor: two reading boxes and a chart update every 2 seconds, no internet needed. This project is the step-by-step guide for the Temperature and humidity Bluetooth template in the app. Go to Workshop › Devices › Add a device › Bluetooth, pick the template and upload the code with Get the code. The Set up as a Bluetooth panel button on this page opens the wizard ready to go.

ESP32 Bluetooth Servo Lock
Control an SG90 servo as a small latch from your phone over Bluetooth: lock, open or set the angle, no internet or Wi-Fi needed. This project is the step-by-step guide to the Servo lock Bluetooth template in the app, built with an ESP32, one servo and 3 wires. Go to Workshop › Devices › Add a device › Bluetooth, pick Servo lock and upload the code with Get the code. The Set up as a Bluetooth panel button on this page opens the wizard with this template too.

ESP32 Bluetooth Text on an LCD
Type a message on your phone and it shows up on a 16x2 LCD over Bluetooth, no internet or Wi-Fi needed. This project is the step-by-step guide to the Text on an LCD Bluetooth template in the app, built with an ESP32 and an I2C LCD. Go to Workshop › Devices › Add a device › Bluetooth, pick Text on an LCD and upload the code with Get the code. The Set up as a Bluetooth panel button on this page opens the wizard with this template too.

ESP32 Bluetooth Parking Sensor (HC-SR04)
Measure the distance to an obstacle with an HC-SR04 and watch it on your phone; the buzzer beeps faster as it gets closer. No internet needed. This is the step-by-step guide to the Parking sensor Bluetooth template in the app, built with an ESP32. Go to Workshop › Devices › Add a device › Bluetooth, pick Parking sensor and upload the code with Get the code. The Set up as a Bluetooth panel button on this page opens the wizard with this template too.

ESP32 Bluetooth Phone Piano
Turn your phone into an 8-key piano: press a key and a passive buzzer on the ESP32 plays that note, no internet or Wi-Fi needed. This is the step-by-step guide to the Phone piano Bluetooth template in the app, built with a buzzer and two jumper wires. Go to Workshop › Devices › Add a device › Bluetooth, pick Phone piano and upload the code with Get the code. The Set up as a Bluetooth panel button on this page opens the wizard with this template too.

ESP32 Excitement Meter: Lie Detector Party Game with a Live OLED Graph (Voltage Divider + SSD1306 + Buzzer)
A lie detector style party game for your friends: you rest two fingers on foil electrodes and the ESP32 first measures your calm baseline. As the questions get harder, skin resistance drops and the voltage divider output rises: a live graph climbs on the OLED, the beeps get higher, and a sudden jump sets off a siren. At the end of the round your highest percentage and a record list of the last four players appear. Just for fun, not a real lie detector.
