Loyihalar · Arduino / ESP32 / Pico

Arduino loyihalarini kashf qil

Boshlang‘ichdan yuqori darajagacha, sxemali, kodli va videoli yuzlab loyihalar. Qaysi darajada bo‘lsang, o‘sha yerdan boshla.

Pico Phone Jail Box: Put Your Phone Away While You Study (LDR + 10 LEDs)
PI-93Boshlang‘ich
Premium

Pico Phone Jail Box: Put Your Phone Away While You Study (LDR + 10 LEDs)

Drop your phone in the box and let the circuit do the rest. The LDR on the floor of the box goes dark when the phone lies on it, and the count starts: one LED lights every 6 minutes, and 10 LEDs mark a full hour of study. Take the phone early and warning ticks start; if it is not back within 5 seconds, the "jail broken" sound plays and the count resets. Finish the hour and a light wave and a victory tune are waiting. One number in the code changes the time.

Pico W IoT Temperature and Humidity (DHT22)
PI-96Boshlang‘ich
IoT

Pico W IoT Temperature and Humidity (DHT22)

Watch your room's temperature and humidity live on your phone wherever you are. This project is the step-by-step guide to the Temperature and humidity IoT template in the app, built with a Raspberry Pi Pico W and a DHT22. Go to Workshop › Devices › Add a device, pick Pico W as the board and Temperature and humidity as the template; Ohmi prepares the code with your own device key. The code on this page is an example: the key and Wi-Fi details are placeholders.

1
Pico W IoT Door Sensor (Reed Switch)
PI-97Boshlang‘ich
IoT

Pico W IoT Door Sensor (Reed Switch)

Did you leave the door or window open? Check on your phone wherever you are. This project is the step-by-step guide to the Door / window IoT template in the app, built with a Raspberry Pi Pico W, a reed switch and a small magnet using two wires. Go to Workshop › Devices › Add a device, pick Pico W as the board and Door / window as the template; Ohmi prepares the code with your own device key. The code on this page is an example: the key and Wi-Fi details are placeholders.

1
Pico W IoT Motion Counter (PIR)
PI-98Boshlang‘ich
IoT

Pico W IoT Motion Counter (PIR)

Count how many times someone walks through a door or hallway, and see the moment of motion live on your phone. This project is the step-by-step guide to the Motion detector IoT template in the app, built with a Raspberry Pi Pico W and a PIR motion sensor using just 3 wires. Go to Workshop › Devices › Add a device; Ohmi prepares the code with your own device key. The code on this page is an example: the key and Wi-Fi details are placeholders.

Pico Decision Roulette: A Ticking Light Roulette That Slows Down and Stops (24-LED Ring + Button + Passive Buzzer)
PI-101Boshlang‘ich
Premium

Pico Decision Roulette: A Ticking Light Roulette That Slows Down and Stops (24-LED Ring + Button + Passive Buzzer)

Press the button: the light races around the 24-LED ring, ticks on every step, slows down and stops on a random LED. The winner blinks and a victory tune plays. Hold the button for a second and the ring splits into 4 slices to choose between four people or four options; 2 slices make yes or no, 6 slices a die. Written in MicroPython; the randomness comes from the noise of an unconnected ADC pin and the moment you release the button.