Arduino loyihalarini kashf qil
Boshlang‘ichdan yuqori darajagacha, sxemali, kodli va videoli yuzlab loyihalar. Qaysi darajada bo‘lsang, o‘sha yerdan boshla.

Arduino Music Player with Song Lyrics: A Karaoke Box with Lyrics Flowing on Screen (I2C LCD + Buzzer + 2 Buttons + Pot)
A karaoke box that plays music and shows the song lyrics on screen. The buzzer plays the melody while the I2C LCD shows the lyrics in time with the notes: each sung syllable turns upper case and the next line waits below. A pot sets the tempo from 60% to 140%, two buttons start, skip and pause. All three tunes are anonymous and copyright-free; the lyrics are written in ASCII because the LCD has no Turkish letters.

Arduino Singing Snowman: Waves When You Approach and Dances (HC-SR04 + 2 Servos + 2 LEDs + Buzzer)
A snowman that comes alive for a shop window or a school door. The HC-SR04 measures who is in front: within 1 metre the blue LED eyes light up, the right arm waves and the buzzer says "hello". Within 30 cm it plays Jingle Bells, the two servo arms rise in turn to the beat and the eyes flash on every note. When the person walks away, the left arm waves goodbye; with nobody around the eyes blink slowly.

Arduino Musical Christmas Wreath: Lights Follow the Notes (24-LED Ring + Button + Buzzer)
A musical wreath for your front door: the 24-LED ring glows like green branches with red berries while the buzzer plays three public-domain Christmas tunes. Every note lights up in its own place and its own color on the ring, high notes glow wider and the whole wreath flashes gold on every beat. Each song has its own pattern. A short press skips to the next song, holding the button switches to silent light mode.

Pico Baby Busy Board: Light and Sound Toy (4 Buttons + Pot + RGB LED)
Each of the four buttons is an animal: the cow moos, the cat meows, the dog goes woof woof and the bird chirps. Every sound has its own RGB colour and its own light pattern on three LEDs. The potentiometer is a rainbow knob: turn it and six colours click past, with a surprise white and a sparkle at the end. After 10 seconds without a touch the board calls for attention with a silent light pattern. A busy board a parent builds by hand and fits into a box.

Musical Chairs: Press When the Music Stops (Arduino + 4 Buttons + 4 LEDs + Buzzer)
Musical chairs for four players: the buzzer plays music and goes silent at a random moment. When it stops everyone presses their own button and the LED of each player who pressed lights up; the last one left is out. Pressing while the music plays is a foul and that player is out too. Rounds go on until one player is left and the winner's LED blinks to a victory tune. Non-blocking music, button debounce and random timing are all in here.

ESP32 Plank Coach: Beeps When Your Hips Drop (MPU-6050 + I2C LCD + Buzzer)
An MPU-6050 taped to your back watches the angle of your body while the ESP32 counts your plank time on the LCD. If your hips drop it warns with low beeps, if they rise with high beeps, and the time pauses right there; fix your form and it carries on. Fail to recover within 3 seconds and the plank ends with your time on the screen. Your best time is stored on the board as the record and survives unplugging. An honest training partner for a New Year fitness resolution.

ESP32 Bluetooth Parking Sensor (HC-SR04)
Measure the distance to an obstacle with an HC-SR04 and watch it on your phone; the buzzer beeps faster as it gets closer. No internet needed. This is the step-by-step guide to the Parking sensor Bluetooth template in the app, built with an ESP32. Go to Workshop › Devices › Add a device › Bluetooth, pick Parking sensor and upload the code with Get the code. The Set up as a Bluetooth panel button on this page opens the wizard with this template too.

ESP32 Bluetooth Phone Piano
Turn your phone into an 8-key piano: press a key and a passive buzzer on the ESP32 plays that note, no internet or Wi-Fi needed. This is the step-by-step guide to the Phone piano Bluetooth template in the app, built with a buzzer and two jumper wires. Go to Workshop › Devices › Add a device › Bluetooth, pick Phone piano and upload the code with Get the code. The Set up as a Bluetooth panel button on this page opens the wizard with this template too.

ESP32 Excitement Meter: Lie Detector Party Game with a Live OLED Graph (Voltage Divider + SSD1306 + Buzzer)
A lie detector style party game for your friends: you rest two fingers on foil electrodes and the ESP32 first measures your calm baseline. As the questions get harder, skin resistance drops and the voltage divider output rises: a live graph climbs on the OLED, the beeps get higher, and a sudden jump sets off a siren. At the end of the round your highest percentage and a record list of the last four players appear. Just for fun, not a real lie detector.

Arduino Decision Roulette: A Ticking Light Roulette That Slows Down and Stops (24-LED Ring + Button + Passive Buzzer)
Press the button: the light races around the 24-LED ring, ticks on every step, slows down and stops on a random LED. The winner blinks and a victory tune plays. Hold the button for a second and the ring splits into 4 slices to choose between four people or four options; 2 slices make yes or no, 6 slices a die. The randomness comes from the noise of an unconnected analog pin and the microsecond you release the button.

ESP32 Decision Roulette: A Ticking Light Roulette That Slows Down and Stops (24-LED Ring + Button + Passive Buzzer)
Press the button: the light races around the 24-LED ring, ticks on every step, slows down and stops on a random LED. The winner blinks and a victory tune plays. Hold the button for a second and the ring splits into 4 slices to choose between four people or four options; 2 slices make yes or no, 6 slices a die. The random numbers come from the hardware random number generator inside the ESP32.

Pico Decision Roulette: A Ticking Light Roulette That Slows Down and Stops (24-LED Ring + Button + Passive Buzzer)
Press the button: the light races around the 24-LED ring, ticks on every step, slows down and stops on a random LED. The winner blinks and a victory tune plays. Hold the button for a second and the ring splits into 4 slices to choose between four people or four options; 2 slices make yes or no, 6 slices a die. Written in MicroPython; the randomness comes from the noise of an unconnected ADC pin and the moment you release the button.
