Arduino loyihalarini kashf qil
Boshlang‘ichdan yuqori darajagacha, sxemali, kodli va videoli yuzlab loyihalar. Qaysi darajada bo‘lsang, o‘sha yerdan boshla.

ESP32 Pomodoro Timer (NeoPixel Ring + Button + Buzzer)
A glowing desk timer that keeps you off your phone while you study! The 24-LED NeoPixel ring shows the time left like a clock face: work is red, short breaks are green and the long break after every four sessions is blue. In the last 5 seconds the ring flashes and the passive buzzer ticks, then a rainbow celebrates the finished phase. One button starts, pauses and resets, all on an ESP32 without a single delay().

ESP32 Automatic Cat Toy (PIR + 2 Servos + LDR + Buzzer)
Keep your cat busy while it is home alone! When the PIR sensor spots the cat, the buzzer chirps like a bird and a feather wand on two SG90 servos moves like prey: mouse dash, hide and seek, zigzag, circle and bug jitter. A game lasts one minute, then the toy rests; when the LDR sees darkness it never plays at night. The moves come from the ESP32's hardware randomness, so the cat cannot learn them.

ESP32 Baby Cradle Rocker (Servo + I2C LCD + 2 Buttons + Buzzer)
A helper for tired parents: an SG90 servo rocks a toy cradle with a soft, sine-like swing while a buzzer quietly plays Brahms' Lullaby. Two buttons give you 3 speeds (SLOW, MEDIUM, FAST), lullaby on/off and a 10, 20 or 30 minute timer, and the I2C LCD shows the mode and the time left. When time is up the cradle never stops dead: the swing fades out slowly and the lullaby slows to its end.

ESP32 Blooming Tulip Lamp: Opens at a Touch (Servo + 24 LED Ring + TTP223)
The maker world's favourite blooming flower lamp, with a Tulip Era twist: touch the TTP223 sensor and an SG90 servo slowly opens the petals on a soft speed curve while a 24 LED ring fades in from darkness. While it is open, every touch changes the colour: red, purple, yellow, warm white and a tulip garden that drifts around the ring. Hold it and the tulip closes as the light fades out.

ESP32 Dinner Bell: Phone Notifications to Every Room (Button + 3 LEDs + Buzzer + ntfy)
Press CALL in the kitchen and everyone's phone gets an ntfy notification. Whoever taps their name in the notification or types "coming" lights up their LED in the kitchen. If someone doesn't show up, the 2nd call is more urgent, the 3rd goes out with top priority and the buzzer plays the Beethoven 5th Symphony motif. HTTP requests run on the ESP32's second core, so the buttons never lag.

ESP32 Exam Countdown and Study Tracker (DS1307 + I2C LCD + 2 Buttons + Buzzer)
A desk counter for students facing a big exam: the I2C LCD shows the days left to the exam and today's study time. The START button starts and pauses a 25 minute session, a 5 minute break begins by itself when it ends, and the buzzer calls you back when the break is over. At midnight the DS1307 clock moves to a new day, the daily time resets and the countdown drops by one.

ESP32 Frost Alarm: Will the Windshield Freeze Tomorrow Morning? (DHT22 + I2C LCD + 2 LEDs + Buzzer)
No more scraping the car window at 7 am: the DHT22 measures outdoor temperature and humidity, the ESP32 works out the dew point and tells you whether the windshield will freeze tonight. The I2C LCD shows temperature, humidity and dew point; green LED means SAFE, blinking red RISK, steady red plus a buzzer alarm FROST. If the air cooled fast in the last hour, it warns you about the night too.

ESP32 IoT Lamp Switch (Relay)
Turn your lamp on and off from your phone, wherever you are. This project is the step-by-step guide to the Relay lamp IoT template in the app, built with an ESP32 and a relay module and tried with an LED first. Go to Workshop › Devices › Add a device and pick Relay lamp; Ohmi prepares the code with your own device key. The code on this page is an example: the key and Wi-Fi details are placeholders.

ESP32-CAM Wi-Fi Live Camera
A live camera on your phone with a palm-sized board: the ESP32-CAM joins your home Wi-Fi and serves its own web page. Type the address from the Serial Monitor into your phone's browser and the live picture (MJPEG stream) appears. A button on the page turns the on-board flash LED on and off, and a list picks the resolution from 320x240 up to 1280x720. You upload the code with a CH340 USB-TTL adapter; one jumper between IO0 and GND while uploading is all it takes.

ESP32 Bluetooth LED and Relay
Switch an LED and a relay on and off from your phone over Bluetooth, no internet or Wi-Fi needed. This project is the step-by-step guide to the LED and relay Bluetooth template in the app, built with an ESP32 and a 5 V relay module. Go to Workshop › Devices › Add a device › Bluetooth, pick LED and relay and upload the code with Get the code. The Set up as a Bluetooth panel button on this page opens the wizard with this template too.

ESP32 Bluetooth Temp and Humidity (DHT11)
Watch your room's temperature and humidity live on your phone with an ESP32 and a DHT11 sensor: two reading boxes and a chart update every 2 seconds, no internet needed. This project is the step-by-step guide for the Temperature and humidity Bluetooth template in the app. Go to Workshop › Devices › Add a device › Bluetooth, pick the template and upload the code with Get the code. The Set up as a Bluetooth panel button on this page opens the wizard ready to go.

ESP32 Bluetooth Servo Lock
Control an SG90 servo as a small latch from your phone over Bluetooth: lock, open or set the angle, no internet or Wi-Fi needed. This project is the step-by-step guide to the Servo lock Bluetooth template in the app, built with an ESP32, one servo and 3 wires. Go to Workshop › Devices › Add a device › Bluetooth, pick Servo lock and upload the code with Get the code. The Set up as a Bluetooth panel button on this page opens the wizard with this template too.
