Loyihalar · Arduino / ESP32 / Pico

Arduino loyihalarini kashf qil

Boshlang‘ichdan yuqori darajagacha, sxemali, kodli va videoli yuzlab loyihalar. Qaysi darajada bo‘lsang, o‘sha yerdan boshla.

ESP32 Light Trail Duel: Two Player Retro Game (16x16 NeoPixel + 4 Buttons + Buzzer)
ES-97O‘rta
Premium

ESP32 Light Trail Duel: Two Player Retro Game (16x16 NeoPixel + 4 Buttons + Buzzer)

Two light bikes race across a 16x16 NeoPixel matrix without stopping and leave a glowing trail behind. Each player has two buttons: one turns the bike left, the other right. Hit a trail, the rival or the edge and you lose the round. The bikes speed up as the round goes on and the room runs out; the first to win 3 rounds takes the match. Score on the matrix, sounds from the buzzer. A two player duel in the style of the 80s trail games, made for New Year's Eve.

ESP32 New Year World Tour: Where Is 2027 Right Now? (NTP + I2C LCD + 24 LED Ring + Buzzer)
ES-98O‘rta
Premium

ESP32 New Year World Tour: Where Is 2027 Right Now? (NTP + I2C LCD + 24 LED Ring + Buzzer)

The new year does not reach the whole world at once: it starts on Kiritimati in the Pacific and travels west for 26 hours. This build follows that wave live. The ESP32 gets the time from the internet (NTP); whenever the new year enters one of 24 stops, one LED on the 24 LED ring lights up, the buzzer chimes and the LCD shows the city. The bottom row counts down to the next city. At the last stop the ring turns into a rainbow.

Habit Chain: Don't Drop Your 2027 Resolution (Arduino + DS1307 + 8x8 NeoPixel + 2 Buttons)
AR-165O‘rta
Premium

Habit Chain: Don't Drop Your 2027 Resolution (Arduino + DS1307 + 8x8 NeoPixel + 2 Buttons)

The don't break the chain method on your desk: press button A every day, that day's square on the 8x8 matrix lights green and the 64-day chain grows by one link. A day without a press stays red. Button B shows how many days in a row you have kept going. The DS1307 clock counts the days and the chain lives in its battery-backed memory, so it survives unplugging. Counting days from a real-time clock, keeping a record in bits, telling short from long presses.

ESP32 IoT Room Station (Relay + DHT22)
ES-99O‘rta
IoT

ESP32 IoT Room Station (Relay + DHT22)

Turn your lamp on from your phone and watch your room's temperature and humidity live, wherever you are. This project is the step-by-step guide to the Room station IoT template in the app, built with an ESP32, a relay module and a DHT22. Go to Workshop › Devices › Add a device and pick Room station; Ohmi prepares the code with your own device key. The code on this page is an example: the key and Wi-Fi details are placeholders.

5.0(1)
4
ESP32 IoT RGB LED Strip (WS2812B)
ES-101O‘rta
IoT

ESP32 IoT RGB LED Strip (WS2812B)

Control your room's light from your phone: pick a color, set the brightness, turn on the rainbow or breathe effect. This project is the step-by-step guide to the RGB LED strip IoT template in the app, built with an ESP32 and a 30-LED WS2812B strip using three wires. Go to Workshop › Devices › Add a device and pick RGB LED strip; Ohmi prepares the code with your own device key. The code on this page is an example: the key and Wi-Fi details are placeholders.

1.0(1)
3
ESP32 IoT Plant Watering (Soil Sensor + Pump)
ES-102O‘rta
IoT

ESP32 IoT Plant Watering (Soil Sensor + Pump)

Let the pump start by itself when the soil in your pot dries out, and watch the soil moisture live on your phone. This project is the step-by-step guide to the Soil moisture + pump IoT template in the app, built with an ESP32, a soil moisture sensor, a relay and a mini water pump. Go to Workshop › Devices › Add a device; Ohmi prepares the code with your own device key. The code on this page is an example: the key and Wi-Fi details are placeholders.

ESP32 IoT Curtain Opener (SG90 Servo)
ES-103O‘rta
IoT

ESP32 IoT Curtain Opener (SG90 Servo)

Tap + or − on your phone and the servo turns to that angle at the same moment: open and close a model curtain, a blind's tilt rod or a small lid from wherever you are. This project is the step-by-step guide to the Servo curtain IoT template in the app, built with an ESP32 and an SG90 servo using just 3 wires. Go to Workshop › Devices › Add a device; Ohmi prepares the code with your own device key. The code on this page is an example: the key and Wi-Fi details are placeholders.

3
ESP32-CAM Camera That Takes Photos When It Sees Motion (PIR + microSD)
ES-105O‘rta
Premium

ESP32-CAM Camera That Takes Photos When It Sees Motion (PIR + microSD)

A battery-powered motion camera for a bird box or the front door. When the HC-SR501 PIR sees motion, the ESP32-CAM wakes from deep sleep, takes three photos and saves them in order on the board's own microSD slot as foto_0001.jpg, foto_0002.jpg. The photo number lives in EEPROM, so the order survives a battery change. When the motion is over the board goes back to sleep; no Wi-Fi or app needed.

Timer1 Stopwatch That Never Drifts (Arduino + TM1637)
AR-167O‘rta
Premium

Timer1 Stopwatch That Never Drifts (Arduino + TM1637)

The Timer1 hardware counter fires an interrupt every 10 ms and the stopwatch counts hundredths with it; however busy the loop gets, the time does not drift. Next to it a second clock counts with delay(10), and button B lets you compare the two on the TM1637 display. In the video, over 15.36 seconds the delay clock counted only 6.22. Covers CTC mode, the prescaler, the OCR1A maths and the ISR.

A Menu That Never Skips: Rotary Encoder with Interrupts (Arduino + KY-040 + I2C LCD)
AR-168O‘rta
Premium

A Menu That Never Skips: Rotary Encoder with Interrupts (Arduino + KY-040 + I2C LCD)

Both pins of the KY-040 rotary encoder are read with interrupts, and you build a turn-and-press settings menu on an I2C LCD: brightness, volume and timer. Even with a slow 50 ms job in the loop, not a single step is lost. In the Step test, spin the encoder fast: in the video the interrupt counted 50 steps, the loop only 10. Covers direction decoding with a state table and debouncing.

Pico Reaction Timer: A Millisecond Reflex Game (Pin.irq + TM1637)
PI-99O‘rta
Premium

Pico Reaction Timer: A Millisecond Reflex Game (Pin.irq + TM1637)

Press START, the LED lights up at a random moment with a beep; how fast you hit the REACT button shows on the TM1637 display in milliseconds. The press is caught by a Pin.irq interrupt and its timestamp is taken right then, so the measurement stays exact even when the loop is busy. Press before the LED and you get "Err". The average of 5 rounds and your record are shown: 313 ms average and a 257 ms record in the video.

Pico Multitasking with Three Timers: LED, Metronome and Clock at Once (machine.Timer + OLED)
PI-100O‘rta
Premium

Pico Multitasking with Three Timers: LED, Metronome and Clock at Once (machine.Timer + OLED)

Three machine.Timers run three jobs at once: the red LED blinks every 250 ms, a metronome beeps 100 times a minute and lights the green LED, and the yellow LED counts the seconds. The main loop deliberately sleeps 400 ms on every pass, yet the rhythms never slip; the OLED shows how many times each timer has run. You learn real multitasking, which delay cannot do, and the keep-the-ISR-short rule.