Arduino loyihalarini kashf qil
Boshlang‘ichdan yuqori darajagacha, sxemali, kodli va videoli yuzlab loyihalar. Qaysi darajada bo‘lsang, o‘sha yerdan boshla.

Arduino Mini Radar (Servo + HC-SR04 + OLED Display)
A movie-style radar from a distance sensor and a servo! The SG90 servo sweeps the HC-SR04 from 0 to 180 degrees while the 0.96 inch OLED draws a rotating sweep line and shows detected objects as dots. When something enters the range, the passive buzzer pings, and the pitch rises as the object gets closer. Servo control, ultrasonic measurement, trigonometry-based drawing and tone() sound in one project.

Raspberry Pi Pico Mini Weather Station (DHT22 + OLED Chart)
How has your room's temperature changed over the last two minutes? The Raspberry Pi Pico reads temperature and humidity from a DHT22 every 2 seconds and shows the value in big digits on a 0.96 inch OLED, with a line chart of the last 60 readings below. An arrow shows the trend and the temperature and humidity pages swap every 4 seconds. The OLED driver is built into the code: one file, no libraries.

ESP32 Earthquake Shake Alarm (MPU-6050 + OLED Display + Buzzer)
When your desk shakes, this screen notices first! The ESP32 measures vibration with an MPU-6050 accelerometer and draws a live trace that scrolls like a seismograph on a 0.96-inch OLED display. When the shaking passes the threshold, a passive buzzer sounds a siren and the red LED flashes; one button silences and resets it. It is an educational shake meter, not an official earthquake warning.

Raspberry Pi Pico Sun Tracking Panel (2 LDRs + SG90 Servo)
A panel that finds the sun on its own! The Raspberry Pi Pico measures light with 2 LDRs on either side of the panel, and an SG90 servo turns it toward the brighter side. A big difference turns it fast, a small one slowly, and it eases to a stop once both sides match. At night the panel swings back east to wait for sunrise. A ready-made experiment for science fairs and school projects.

Arduino Kitchen Scale (HX711 + Load Cell + I2C LCD)
Put the bowl on, press the button, zero! A real kitchen scale with an HX711 amplifier and a 5 kg load cell: the I2C LCD shows the weight in grams or ounces, with a fill bar on the second row. One button does two jobs: a short press tares, a long press switches between g and oz. At 5 kg an overload warning appears. Calibration, a moving average and short/long presses in one project.

Arduino Smart Thermostat (DHT22 + Relay + I2C LCD)
Room at 19 degrees, target 21: the relay clicks on! The DHT22 measures the temperature, and when it drops below the target the relay turns the heater on. Thanks to hysteresis, the relay does not keep clicking around the target. Two buttons set the target in 0.5 °C steps, and it is kept in EEPROM; the I2C LCD shows temperature, humidity and heater state. The basics of real home automation in one project.

Raspberry Pi Pico Tea Thermometer (DS18B20 + TM1637 + Buzzer)
Let the Pico tell you when your tea is ready to drink! We are building a thermometer with a Raspberry Pi Pico that measures the tea in your glass. A waterproof DS18B20 probe goes into the tea, and a TM1637 display shows the temperature and the time left until it is drinkable. At 65 degrees the buzzer plays a tune, and it warns you if the tea gets cold.

Raspberry Pi Pico Digital Spirit Level (MPU-6050 + OLED Display)
Shelf up, but is it straight? We are building a digital spirit level with a Raspberry Pi Pico. The MPU-6050 measures gravity, and the OLED shows a bubble in a bullseye plus the X / Y tilt. Stand the board on its edge and the display turns into a classic tube level. Below 0.5° the display lights LEVEL, and just like a real one, the bubble drifts to the higher side.

Arduino Tilt Arrow (MPU-6050 + MAX7219 8x8 LED Matrix)
Tilt the circuit and the arrow turns to follow! We are building a tilt arrow that points downhill with an Arduino, an MPU-6050 accelerometer and a MAX7219 8x8 LED matrix. The arrow turns in 8 directions, grows as the tilt increases and blinks when it gets very steep. When the circuit is level, a pulsing level sign appears, and the angle and direction are printed to the serial monitor too.

ESP32 microSD Temperature and Humidity Logger (DHT22 + ILI9341 Graph)
Log the temperature of a room, greenhouse or fridge all day long! An ESP32 measures temperature and humidity with a DHT22 every 2 s and writes each reading to a CSV file on a microSD card. The ILI9341 color display shows live values, min and max, and a two-color live graph of the last 30 readings. Plug the card into your computer and open the file in Excel.

Raspberry Pi Pico W Door Alarm with Phone Notifications (HC-SR04 + OLED + Buzzer)
A home alarm that sounds a siren and pings your phone when the door opens! The Raspberry Pi Pico W joins your home Wi-Fi, and an HC-SR04 facing the door notices the change in distance as it opens. You arm it with a button; when the door opens, a 5-second entry delay starts, and if nobody disarms it the buzzer wails, the red LED flashes and an urgent notification goes out. The OLED shows the state, countdown, clock and send result.

ESP32 Egg Incubator Controller (DHT22 + Relay + Servo + OLED)
Hand the hen's job to an ESP32! The DHT22 measures temperature and humidity, a relay switches the heater with hysteresis, an SG90 servo gently tilts the egg tray every 3 hours, and the 0.96 inch OLED shows the day counter, a temperature graph and alarms. Chicken, quail and duck profiles are built in, and turning stops by itself for the last 3 days. If the sensor fails, the heater switches off for safety.
