Arduino loyihalarini kashf qil
Boshlang‘ichdan yuqori darajagacha, sxemali, kodli va videoli yuzlab loyihalar. Qaysi darajada bo‘lsang, o‘sha yerdan boshla.

Raspberry Pi Pico W Laundry Done Notifier (MPU-6050 + TM1637 + Buzzer)
A little box that tells your phone when the laundry is done! The Raspberry Pi Pico W measures vibration with an MPU-6050 sitting on top of the machine; while it runs, the TM1637 display counts the time and a blue LED lights up during the spin. After 3 minutes without vibration, a green LED comes on, the buzzer double-beeps and a "laundry done" notification with the run time lands on your phone. If you don't confirm, a second reminder follows 10 minutes later.

Raspberry Pi Pico W Internet-Synced New Year Countdown (MAX7219 8x32 + LED Ring + Buzzer)
A glowing sign that counts down to New Year second by second! The Raspberry Pi Pico W takes the time from the internet, so nobody has to set it; the MAX7219 8x32 LED sign shows the days left, then hours:minutes:seconds on the last day. In the last 10 seconds giant digits and beeps arrive while the 24-LED ring goes out slice by slice. At midnight the year blinks, a greeting scrolls, fireworks burst on the ring and the buzzer plays a fanfare.

Raspberry Pi Pico W Remote-Unlock Gift Box (SG90 Servo + LED Ring + MQTT + Buzzer)
Lock the present in a box and keep the key on your phone! The Raspberry Pi Pico W holds the lid shut with an SG90 servo latch; when the right code arrives from any MQTT app on your phone, the box opens with a tune and fireworks burst across the 24-LED ring. Add a time lock if you like: the box gets the time from the internet, stays shut until midnight on New Year's Eve and counts down on the ring. Three wrong codes mean a 60-second lockout.

Arduino Remote Claw Machine Game: Grab the Plush in 30 Seconds (IR + 3 Servos + LCD)
A desktop version of the plush claw machine at the mall, played with a TV remote. Three servos swing the boom left and right, lower and raise the claw and open and close it; an I2C LCD shows the 30-second countdown, the try counter and a map of the machine. Just like the real thing there is a grip chance: right above the plush the claw will most likely hold it and carry it to the prize hole, one stop off and the plush slips away at the top.

Arduino Remote-Programmed Robot: Coding for Preschoolers (IR + 8x8 NeoPixel)
Screen-free coding in the style of floor robots: a child enters up to 10 steps with the remote's 2-4-6-8 keys, presses PLAY and a pixel robot follows the plan step by step through a maze on an 8x8 NeoPixel matrix. A wall makes it flash red and go back to the start; reaching the goal brings a rainbow celebration and the next maze. 4 ready mazes plus undo and clear keys. A ready-made activity for kindergarten and primary classes.

ESP32 Wi-Fi Plant Watering: Waters When the Soil Dries, Tells Your Phone (Soil Moisture Sensor + Relay + Pump + LCD + ntfy)
Automatic plant watering with an ESP32: the soil moisture sensor is turned into a percentage, and when it drops the relay runs the pump in short pulses, waits for the water to soak in and measures again. A float switch locks the pump when the tank is empty, and a daily limit prevents flooding. After every watering your phone gets "Bitki sulandi (nem %28 -> %65)"; watering keeps going even without Wi-Fi.

ESP32 Wi-Fi Automatic Pet Feeder: Meals on Time, Phone Notifications (Servo + HC-SR04 + LCD + NTP + ntfy)
An ESP32 automatic pet feeder for a cat, dog or fish: it gets the time from the internet (NTP), rings a food bell before each of 3 daily meals, then an SG90 servo opens and shakes the hopper lid once per portion. An HC-SR04 measures how full the hopper is and warns when it runs low; every meal and low warning reaches your phone through ntfy. A button gives an extra portion (2 a day at most) or skips the day, and the pet never goes hungry when the internet or power drops.

ESP32 Wi-Fi Water Heater Temperature Control: Phone Alert When the Hot Water Is Ready (DS18B20 + Relay + LCD + ntfy)
Water heater temperature control with an ESP32: a DS18B20 measures the water and a relay switches the heater on at target − 3 °C and off at the target. ECO, NORMAL and SHOWER modes plus + and − buttons set the target, and your phone gets a "su hazir" (hot water ready) alert. Overheating, a dead sensor or a heater that won't heat cut the relay at once. 230 V warning: the relay drives a contactor; a breaker, an RCD and a licensed electrician are a must.

Raspberry Pi Pico W Window Left Open: The Heating Runs for Nothing (DS18B20 + LED + Buzzer + ntfy)
A Raspberry Pi Pico W watches the room temperature with a DS18B20 and spots a window left open by how fast the room cools: if it drops 1 °C within 3 minutes, the buzzer sounds an alarm, the LED blinks and an ntfy notification reaches your phone. When the window is closed the room warms up again; the code catches that and reports how many minutes it was open. The slow cooling of a night setback gives no alarm.

ESP32 Fall Alarm: Notifies the Family if Nobody Answers (MPU-6050 + Button + Buzzer)
Worn on a belt or in a pocket, this device uses an MPU-6050 to catch a sudden impact followed by stillness. Once that counts as a fall it counts down 30 seconds: the buzzer beeps and the LED blinks. Pressing the I am OK button in that time cancels the alarm. If nobody presses it, a siren sounds and the ESP32 sends a notification to the family's phones over Wi-Fi with ntfy. Made for icy winter days and relatives who live alone; the siren works even without internet.

Pico W Chore Wheel: Whose Turn Is It to Do the Dishes? (Servo + NTP + ntfy)
A Raspberry Pi Pico W gets the time from the internet and passes the dish duty to the next person every midnight. A servo pointer shows today's name on the dial and that person's LED blinks. When the job is done, press the button briefly: the LED stays on, the pointer nods and a "done" notification goes to the phone. If nobody has pressed by 20:00, a reminder arrives. Hold the button for 1 second and the wheel spins to draw a name for an extra chore like the trash.

ESP32 New Year World Tour: Where Is 2027 Right Now? (NTP + I2C LCD + 24 LED Ring + Buzzer)
The new year does not reach the whole world at once: it starts on Kiritimati in the Pacific and travels west for 26 hours. This build follows that wave live. The ESP32 gets the time from the internet (NTP); whenever the new year enters one of 24 stops, one LED on the 24 LED ring lights up, the buzzer chimes and the LCD shows the city. The bottom row counts down to the next city. At the last stop the ring turns into a rainbow.
