Loyihalar · Arduino / ESP32 / Pico

Arduino loyihalarini kashf qil

Boshlang‘ichdan yuqori darajagacha, sxemali, kodli va videoli yuzlab loyihalar. Qaysi darajada bo‘lsang, o‘sha yerdan boshla.

ESP32 Wi-Fi Water Heater Temperature Control: Phone Alert When the Hot Water Is Ready (DS18B20 + Relay + LCD + ntfy)
ES-89O‘rta
Premium

ESP32 Wi-Fi Water Heater Temperature Control: Phone Alert When the Hot Water Is Ready (DS18B20 + Relay + LCD + ntfy)

Water heater temperature control with an ESP32: a DS18B20 measures the water and a relay switches the heater on at target − 3 °C and off at the target. ECO, NORMAL and SHOWER modes plus + and − buttons set the target, and your phone gets a "su hazir" (hot water ready) alert. Overheating, a dead sensor or a heater that won't heat cut the relay at once. 230 V warning: the relay drives a contactor; a breaker, an RCD and a licensed electrician are a must.

Raspberry Pi Pico W Window Left Open: The Heating Runs for Nothing (DS18B20 + LED + Buzzer + ntfy)
PI-87O‘rta
Premium

Raspberry Pi Pico W Window Left Open: The Heating Runs for Nothing (DS18B20 + LED + Buzzer + ntfy)

A Raspberry Pi Pico W watches the room temperature with a DS18B20 and spots a window left open by how fast the room cools: if it drops 1 °C within 3 minutes, the buzzer sounds an alarm, the LED blinks and an ntfy notification reaches your phone. When the window is closed the room warms up again; the code catches that and reports how many minutes it was open. The slow cooling of a night setback gives no alarm.

ESP32 Moon Phase Lamp: What Does the Moon Look Like Tonight? (DS1307 + 8x8 NeoPixel + Button)
ES-91O‘rta
Premium

ESP32 Moon Phase Lamp: What Does the Moon Look Like Tonight? (DS1307 + 8x8 NeoPixel + Button)

A night lamp for your desk that draws tonight's moon: an 8x8 NeoPixel matrix shows a crescent, a quarter, a gibbous or a full moon. The DS1307 keeps the date, and the ESP32 counts the phase from a known new moon and corrects it with Meeus' terms to within a minute. One button switches between today, days to full moon and a whole month played in 8 seconds. 24 December 2026 is the last full moon of the year.

Santa Trap: What Time Did He Come? (Arduino + PIR + DS1307 + LCD)
AR-158O‘rta
Premium

Santa Trap: What Time Did He Come? (Arduino + PIR + DS1307 + LCD)

The trap arms itself when the light goes off. If the PIR sees motion, the time is read from the DS1307 and saved, and the servo camera swings left and right; all night the I2C LCD gives nothing away. When the light returns in the morning, the screen shows the time of the first visit and how many visits there were. Night/day sensing with an LDR and hysteresis, PIR rising edge detection and non-blocking servo motion with millis() are in the code.

ESP32 Firefly Jar: Lights That Fall Into Sync on Their Own (8 LEDs + Button)
ES-93O‘rta
Premium

ESP32 Firefly Jar: Lights That Fall Into Sync on Their Own (8 LEDs + Button)

The 8 LEDs in the jar are fireflies: they flash at random first, and a few minutes later, with nobody telling them, all of them flash at once. There is one rule: a firefly that sees a neighbour flash moves its own clock a little forward. When sync arrives the jar glows for 3 seconds. A short press of the button shakes the jar and scatters them; a long press stops them seeing each other. In the fast version in the video sync takes 11 seconds. No PWM, no library.

ESP32 Sunrise Alarm Clock: Wake Up Gently with Light (DS1307 + LED Ring + LCD)
ES-94O‘rta
Premium

ESP32 Sunrise Alarm Clock: Wake Up Gently with Light (DS1307 + LED Ring + LCD)

Getting up in the dark on a winter morning is hard. 20 minutes before the alarm this clock slowly lights a 24-LED ring from the bottom up: deep red first, then orange, warm white at the end. At alarm time the buzzer plays birdsong. The PLUS button snoozes for 5 minutes, the SET button silences it. A battery-backed DS1307 keeps the time and the alarm is stored on the board, so neither is lost in a power cut. The LCD shows the time, the alarm and the sunrise percentage.

Alarm Clock That Won't Stop Until You Solve It (Arduino + DS1307 + LCD + 4 Buttons + Buzzer)
AR-162O‘rta
Premium

Alarm Clock That Won't Stop Until You Solve It (Arduino + DS1307 + LCD + 4 Buttons + Buzzer)

An alarm clock with no snooze button: when the alarm rings, a multiplication question and four choices appear on the LCD, and you answer with the A, B, C, D buttons. The buzzer does not go silent until you solve three questions in a row; a wrong answer resets the counter. The time is read from the DS1307 and the alarm is set with the same four buttons. Reading a real-time clock, making random questions and sounding an alarm without blocking are all in this project.

ESP32 Fall Alarm: Notifies the Family if Nobody Answers (MPU-6050 + Button + Buzzer)
ES-95O‘rta
Premium

ESP32 Fall Alarm: Notifies the Family if Nobody Answers (MPU-6050 + Button + Buzzer)

Worn on a belt or in a pocket, this device uses an MPU-6050 to catch a sudden impact followed by stillness. Once that counts as a fall it counts down 30 seconds: the buzzer beeps and the LED blinks. Pressing the I am OK button in that time cancels the alarm. If nobody presses it, a siren sounds and the ESP32 sends a notification to the family's phones over Wi-Fi with ntfy. Made for icy winter days and relatives who live alone; the siren works even without internet.

Pico Sleep Tracker: How Many Times Did You Turn Last Night? (MPU-6050 + OLED)
PI-92O‘rta
Premium

Pico Sleep Tracker: How Many Times Did You Turn Last Night? (MPU-6050 + OLED)

An MPU-6050 under your pillow watches the pillow's tilt all night. If the sensor shakes and comes back to the same posture it counts a move; if it settles at a new tilt it counts a turn. Events are logged hour by hour, and in the morning the OLED screen shows an hourly bar chart of the night and a sleep score from 0 to 100. One button starts the night, flips the report pages and ends the night when you hold it. The screen switches itself off while you sleep.

Pico W Chore Wheel: Whose Turn Is It to Do the Dishes? (Servo + NTP + ntfy)
PI-94O‘rta
Premium

Pico W Chore Wheel: Whose Turn Is It to Do the Dishes? (Servo + NTP + ntfy)

A Raspberry Pi Pico W gets the time from the internet and passes the dish duty to the next person every midnight. A servo pointer shows today's name on the dial and that person's LED blinks. When the job is done, press the button briefly: the LED stays on, the pointer nods and a "done" notification goes to the phone. If nobody has pressed by 20:00, a reminder arrives. Hold the button for 1 second and the wheel spins to draw a name for an extra chore like the trash.

Habit Chain: Don't Drop Your 2027 Resolution (Arduino + DS1307 + 8x8 NeoPixel + 2 Buttons)
AR-165O‘rta
Premium

Habit Chain: Don't Drop Your 2027 Resolution (Arduino + DS1307 + 8x8 NeoPixel + 2 Buttons)

The don't break the chain method on your desk: press button A every day, that day's square on the 8x8 matrix lights green and the 64-day chain grows by one link. A day without a press stays red. Button B shows how many days in a row you have kept going. The DS1307 clock counts the days and the chain lives in its battery-backed memory, so it survives unplugging. Counting days from a real-time clock, keeping a record in bits, telling short from long presses.

ESP32 IoT Room Station (Relay + DHT22)
ES-99O‘rta
IoT

ESP32 IoT Room Station (Relay + DHT22)

Turn your lamp on from your phone and watch your room's temperature and humidity live, wherever you are. This project is the step-by-step guide to the Room station IoT template in the app, built with an ESP32, a relay module and a DHT22. Go to Workshop › Devices › Add a device and pick Room station; Ohmi prepares the code with your own device key. The code on this page is an example: the key and Wi-Fi details are placeholders.

5.0(1)
4