Arduino loyihalarini kashf qil
Boshlang‘ichdan yuqori darajagacha, sxemali, kodli va videoli yuzlab loyihalar. Qaysi darajada bo‘lsang, o‘sha yerdan boshla.

Servo Control with Joystick
Steer two motors with a joystick, just like turning a security camera. Push the stick left or right and the bottom servo motor slowly turns, push it up or down and the top servo tilts up and down…

Using a Stepper Motor
A motor that turns step by step, exactly as far as you want, like the hand of a clock.

360-Degree Servo from a Stepper Motor
Teach an ordinary stepper motor to go to any angle you want, all the way around the circle.

Arduino Mini Radar (Servo + HC-SR04 + OLED Display)
A movie-style radar from a distance sensor and a servo! The SG90 servo sweeps the HC-SR04 from 0 to 180 degrees while the 0.96 inch OLED draws a rotating sweep line and shows detected objects as dots. When something enters the range, the passive buzzer pings, and the pitch rises as the object gets closer. Servo control, ultrasonic measurement, trigonometry-based drawing and tone() sound in one project.

Arduino Tilt-Controlled Digital Sand (MPU-6050 + 8x8 NeoPixel Matrix)
LED sand that flows whichever way you tilt the circuit! The MPU-6050 accelerometer measures the tilt, and 24 grains on the 8x8 NeoPixel matrix fall toward gravity and pile up at the edges like real sand. A theme button switches between sand, water, lava and rainbow colors. Library-free I2C reading, turning tilt into a gravity direction and a simple falling-sand algorithm in one project.

Arduino Ultrasonic Theremin (HC-SR04 + NeoPixel Ring + Buzzer)
A musical instrument you play without touching it, just by moving your hand in the air! As your hand gets closer to the HC-SR04, the passive buzzer plays higher notes and the 24-LED NeoPixel ring shows each note with color and fill level. A button switches between two modes: in SCALE mode every distance snaps to a note of a pentatonic scale, and in GLIDE mode the sound slides smoothly like an old sci-fi movie. Your hand writes the melody, not the code.

Arduino Tilt Marble Maze (MPU-6050 + MAX7219 8x8 LED Matrix)
No screen, no joystick: tilt the circuit and an LED marble rolls through a maze! The MPU-6050 accelerometer measures the tilt, and the marble on the MAX7219 8x8 LED matrix rolls that way without passing through walls. Reach the goal and a passive buzzer plays a tune as the next maze opens; finish all 3 for a smiley. Library-free sensor reading, tilt-to-speed control and mazes written as text in one project.

Arduino Tilt Arrow (MPU-6050 + MAX7219 8x8 LED Matrix)
Tilt the circuit and the arrow turns to follow! We are building a tilt arrow that points downhill with an Arduino, an MPU-6050 accelerometer and a MAX7219 8x8 LED matrix. The arrow turns in 8 directions, grows as the tilt increases and blinks when it gets very steep. When the circuit is level, a pulsing level sign appears, and the angle and direction are printed to the serial monitor too.

Arduino Hourglass (2x MAX7219 8x8 LED Matrix + MPU-6050)
The sand is not real, but flip it and it runs back! We are building a digital hourglass with an Arduino, two MAX7219 8x8 LED matrices and an MPU-6050. Grains in the upper bulb drop one by one through a narrow neck and pile up below. Flip it and the sand flows back, lay it flat and it pauses; when time is up, the lower bulb blinks.

Arduino Product Turntable (NEMA 17 Stepper Motor + A4988 + LCD)
Build your own turntable for product photos and 360-degree videos! A NEMA 17 stepper is driven by an A4988 from just two signals and speeds up and slows down smoothly, so the product never wobbles. There are three modes: continuous spin with the speed on a pot, photo 360 that splits a turn into 12, 24 or 36 stops with a beep at each one, and a showcase-style ±90° swing. The I2C LCD shows speed, angle and shot count.

Arduino Smart Car Park (2x HC-SR04 + Servo Barrier + I2C LCD)
The barrier rises when a car arrives and stays down when the car park is full! An HC-SR04 at the entry and one at the exit detect cars, an SG90 servo lifts the barrier arm smoothly and an I2C LCD shows the free spaces and a fill bar. When it is full, the red LED lights, and a barrier that sees a car under it while lowering goes back up. The counter is kept in EEPROM; perfect for a smart city school project.

Arduino 3-Floor Elevator (NEMA 17 Stepper Motor + A4988 + Servo Door + TM1637)
Build a model elevator that steals the show at the science fair! A NEMA 17 stepper driven by an A4988 lifts and lowers the cabin smoothly; at each floor it plays a "ding-dong", an SG90 servo opens the door and closes it after three warning beeps. Calls are served like in a real elevator: floors ahead first, then the way back, and the cabin stops for calls on the way. The TM1637 display shows the direction arrow, floor and door state.
