Arduino loyihalarini kashf qil
Boshlang‘ichdan yuqori darajagacha, sxemali, kodli va videoli yuzlab loyihalar. Qaysi darajada bo‘lsang, o‘sha yerdan boshla.

Arduino Ultrasonic Theremin (HC-SR04 + NeoPixel Ring + Buzzer)
A musical instrument you play without touching it, just by moving your hand in the air! As your hand gets closer to the HC-SR04, the passive buzzer plays higher notes and the 24-LED NeoPixel ring shows each note with color and fill level. A button switches between two modes: in SCALE mode every distance snaps to a note of a pentatonic scale, and in GLIDE mode the sound slides smoothly like an old sci-fi movie. Your hand writes the melody, not the code.

Raspberry Pi Pico Parking Barrier (SG90 Servo + 2 LEDs + Button + Buzzer)
A small model of the boom barrier at a car park entrance! Press the button and the Raspberry Pi Pico raises the arm smoothly with an SG90 servo as the green LED comes on. It stays open for 3 seconds, then lowers slowly with a flashing red LED and warning beeps from the buzzer. Press again while it is lowering and the arm rises at once for safety. Servo control, a state machine and non-blocking timing in one project.

Raspberry Pi Pico Keypad Lock (4x4 Keypad + I2C LCD + Servo)
A 4-digit code opens the door, and three wrong tries mean a 30 second wait! The Raspberry Pi Pico checks the PIN typed on a 4x4 keypad: if it's right, an SG90 servo unlocks and relocks by itself after 5 seconds. An I2C LCD shows the stars, the tries left and the countdown, and a buzzer beeps on every key. The default PIN is 1234; change it with the A key and the new one is saved to pin.txt.

Arduino Tilt Marble Maze (MPU-6050 + MAX7219 8x8 LED Matrix)
No screen, no joystick: tilt the circuit and an LED marble rolls through a maze! The MPU-6050 accelerometer measures the tilt, and the marble on the MAX7219 8x8 LED matrix rolls that way without passing through walls. Reach the goal and a passive buzzer plays a tune as the next maze opens; finish all 3 for a smiley. Library-free sensor reading, tilt-to-speed control and mazes written as text in one project.

Raspberry Pi Pico Sun Tracking Panel (2 LDRs + SG90 Servo)
A panel that finds the sun on its own! The Raspberry Pi Pico measures light with 2 LDRs on either side of the panel, and an SG90 servo turns it toward the brighter side. A big difference turns it fast, a small one slowly, and it eases to a stop once both sides match. At night the panel swings back east to wait for sunrise. A ready-made experiment for science fairs and school projects.

Arduino Touchless Trash Can (HC-SR04 + SG90 Servo + LED)
Wave your hand and the lid opens by itself! When the HC-SR04 ultrasonic sensor sees your hand closer than 15 cm, an SG90 servo lifts the lid in half a second and an LED lights up. Once the hand is gone, the lid waits 3 s and closes slowly. If the sensor detects a hand while the lid is closing, it reopens; contact is still possible because of measurement delays or an undetected hand. A school project favourite that is genuinely useful at home.

Raspberry Pi Pico Shake Dice (MPU-6050 + OLED Display + Buzzer)
Lost your dice? No problem: shake the circuit and the die rolls on a 0.96 inch OLED! An MPU-6050 accelerometer senses the shake, the die wobbles and spins, and once you stop it slows down and lands on a face. The MODE button switches between one die and two; roll a double and the screen flashes while the buzzer plays a celebration tune. The Raspberry Pi Pico reads the sensor straight over I2C, no library needed.

Raspberry Pi Pico PIR Motion Alarm (PIR Sensor + Buzzer + LED)
Walk in once and you get a warning, walk in again and the siren goes off! We are building a two-stage motion alarm with a Raspberry Pi Pico and a PIR motion sensor. It arms itself after a countdown. The first motion plays a ding-dong warning on the buzzer; a second motion within 15 seconds sounds the siren and strobes the LED. Afterwards it re-arms on its own and logs every event with a timestamp.

Arduino Tilt Arrow (MPU-6050 + MAX7219 8x8 LED Matrix)
Tilt the circuit and the arrow turns to follow! We are building a tilt arrow that points downhill with an Arduino, an MPU-6050 accelerometer and a MAX7219 8x8 LED matrix. The arrow turns in 8 directions, grows as the tilt increases and blinks when it gets very steep. When the circuit is level, a pulsing level sign appears, and the angle and direction are printed to the serial monitor too.

Arduino Hourglass (2x MAX7219 8x8 LED Matrix + MPU-6050)
The sand is not real, but flip it and it runs back! We are building a digital hourglass with an Arduino, two MAX7219 8x8 LED matrices and an MPU-6050. Grains in the upper bulb drop one by one through a narrow neck and pile up below. Flip it and the sand flows back, lay it flat and it pauses; when time is up, the lower bulb blinks.

Arduino Product Turntable (NEMA 17 Stepper Motor + A4988 + LCD)
Build your own turntable for product photos and 360-degree videos! A NEMA 17 stepper is driven by an A4988 from just two signals and speeds up and slows down smoothly, so the product never wobbles. There are three modes: continuous spin with the speed on a pot, photo 360 that splits a turn into 12, 24 or 36 stops with a beep at each one, and a showcase-style ±90° swing. The I2C LCD shows speed, angle and shot count.

Arduino Penalty Shootout Game (Servo Goalkeeper + TM1637 Display)
A 5-shot penalty shootout on your desk! After a 3-2-1 beep and a whistle you shoot with the left, middle or right button, and the SG90 servo keeper dives to a corner at the same moment. The keeper learns: keep shooting at the same corner and it starts diving there more often. The score is on the TM1637 display, the ball's corner on the LEDs, and the goal tune comes from a passive buzzer. Randomness, weighted odds and servo control in one game.
