Loyihalar · Arduino / ESP32 / Pico

Arduino loyihalarini kashf qil

Boshlang‘ichdan yuqori darajagacha, sxemali, kodli va videoli yuzlab loyihalar. Qaysi darajada bo‘lsang, o‘sha yerdan boshla.

Raspberry Pi Pico W Window Left Open: The Heating Runs for Nothing (DS18B20 + LED + Buzzer + ntfy)
PI-87O‘rta
Premium

Raspberry Pi Pico W Window Left Open: The Heating Runs for Nothing (DS18B20 + LED + Buzzer + ntfy)

A Raspberry Pi Pico W watches the room temperature with a DS18B20 and spots a window left open by how fast the room cools: if it drops 1 °C within 3 minutes, the buzzer sounds an alarm, the LED blinks and an ntfy notification reaches your phone. When the window is closed the room warms up again; the code catches that and reports how many minutes it was open. The slow cooling of a night setback gives no alarm.

ESP32 Moon Phase Lamp: What Does the Moon Look Like Tonight? (DS1307 + 8x8 NeoPixel + Button)
ES-91O‘rta
Premium

ESP32 Moon Phase Lamp: What Does the Moon Look Like Tonight? (DS1307 + 8x8 NeoPixel + Button)

A night lamp for your desk that draws tonight's moon: an 8x8 NeoPixel matrix shows a crescent, a quarter, a gibbous or a full moon. The DS1307 keeps the date, and the ESP32 counts the phase from a known new moon and corrects it with Meeus' terms to within a minute. One button switches between today, days to full moon and a whole month played in 8 seconds. 24 December 2026 is the last full moon of the year.

Arduino Musical Christmas Wreath: Lights Follow the Notes (24-LED Ring + Button + Buzzer)
AR-157Boshlang‘ich
Premium

Arduino Musical Christmas Wreath: Lights Follow the Notes (24-LED Ring + Button + Buzzer)

A musical wreath for your front door: the 24-LED ring glows like green branches with red berries while the buzzer plays three public-domain Christmas tunes. Every note lights up in its own place and its own color on the ring, high notes glow wider and the whole wreath flashes gold on every beat. Each song has its own pattern. A short press skips to the next song, holding the button switches to silent light mode.

Santa Trap: What Time Did He Come? (Arduino + PIR + DS1307 + LCD)
AR-158O‘rta
Premium

Santa Trap: What Time Did He Come? (Arduino + PIR + DS1307 + LCD)

The trap arms itself when the light goes off. If the PIR sees motion, the time is read from the DS1307 and saved, and the servo camera swings left and right; all night the I2C LCD gives nothing away. When the light returns in the morning, the screen shows the time of the first visit and how many visits there were. Night/day sensing with an LDR and hysteresis, PIR rising edge detection and non-blocking servo motion with millis() are in the code.

Homemade Yogurt Maker: 8 Hours at 43 °C (Arduino + DS18B20 + PID)
AR-159Yuqori
Premium

Homemade Yogurt Maker: 8 Hours at 43 °C (Arduino + DS18B20 + PID)

A waterproof DS18B20 measures the milk, and a PID loop drives the relay in a time window to hold the heater at 43 °C. Once the temperature reaches the target, an 8-hour countdown starts. The I2C LCD shows the temperature, the PID output and the time left, and the buzzer sounds when time is up. Two buttons set the target (38-46 °C) and the duration (4-12 hours). Active-low relay handling, sensor fault and overheat protection are in the code.

ESP32 Firefly Jar: Lights That Fall Into Sync on Their Own (8 LEDs + Button)
ES-93O‘rta
Premium

ESP32 Firefly Jar: Lights That Fall Into Sync on Their Own (8 LEDs + Button)

The 8 LEDs in the jar are fireflies: they flash at random first, and a few minutes later, with nobody telling them, all of them flash at once. There is one rule: a firefly that sees a neighbour flash moves its own clock a little forward. When sync arrives the jar glows for 3 seconds. A short press of the button shakes the jar and scatters them; a long press stops them seeing each other. In the fast version in the video sync takes 11 seconds. No PWM, no library.

ESP32 Sunrise Alarm Clock: Wake Up Gently with Light (DS1307 + LED Ring + LCD)
ES-94O‘rta
Premium

ESP32 Sunrise Alarm Clock: Wake Up Gently with Light (DS1307 + LED Ring + LCD)

Getting up in the dark on a winter morning is hard. 20 minutes before the alarm this clock slowly lights a 24-LED ring from the bottom up: deep red first, then orange, warm white at the end. At alarm time the buzzer plays birdsong. The PLUS button snoozes for 5 minutes, the SET button silences it. A battery-backed DS1307 keeps the time and the alarm is stored on the board, so neither is lost in a power cut. The LCD shows the time, the alarm and the sunrise percentage.

Alarm Clock That Won't Stop Until You Solve It (Arduino + DS1307 + LCD + 4 Buttons + Buzzer)
AR-162O‘rta
Premium

Alarm Clock That Won't Stop Until You Solve It (Arduino + DS1307 + LCD + 4 Buttons + Buzzer)

An alarm clock with no snooze button: when the alarm rings, a multiplication question and four choices appear on the LCD, and you answer with the A, B, C, D buttons. The buzzer does not go silent until you solve three questions in a row; a wrong answer resets the counter. The time is read from the DS1307 and the alarm is set with the same four buttons. Reading a real-time clock, making random questions and sounding an alarm without blocking are all in this project.

ESP32 Fall Alarm: Notifies the Family if Nobody Answers (MPU-6050 + Button + Buzzer)
ES-95O‘rta
Premium

ESP32 Fall Alarm: Notifies the Family if Nobody Answers (MPU-6050 + Button + Buzzer)

Worn on a belt or in a pocket, this device uses an MPU-6050 to catch a sudden impact followed by stillness. Once that counts as a fall it counts down 30 seconds: the buzzer beeps and the LED blinks. Pressing the I am OK button in that time cancels the alarm. If nobody presses it, a siren sounds and the ESP32 sends a notification to the family's phones over Wi-Fi with ntfy. Made for icy winter days and relatives who live alone; the siren works even without internet.

Pico Sleep Tracker: How Many Times Did You Turn Last Night? (MPU-6050 + OLED)
PI-92O‘rta
Premium

Pico Sleep Tracker: How Many Times Did You Turn Last Night? (MPU-6050 + OLED)

An MPU-6050 under your pillow watches the pillow's tilt all night. If the sensor shakes and comes back to the same posture it counts a move; if it settles at a new tilt it counts a turn. Events are logged hour by hour, and in the morning the OLED screen shows an hourly bar chart of the night and a sleep score from 0 to 100. One button starts the night, flips the report pages and ends the night when you hold it. The screen switches itself off while you sleep.

Pico Phone Jail Box: Put Your Phone Away While You Study (LDR + 10 LEDs)
PI-93Boshlang‘ich
Premium

Pico Phone Jail Box: Put Your Phone Away While You Study (LDR + 10 LEDs)

Drop your phone in the box and let the circuit do the rest. The LDR on the floor of the box goes dark when the phone lies on it, and the count starts: one LED lights every 6 minutes, and 10 LEDs mark a full hour of study. Take the phone early and warning ticks start; if it is not back within 5 seconds, the "jail broken" sound plays and the count resets. Finish the hour and a light wave and a victory tune are waiting. One number in the code changes the time.

Pico W Chore Wheel: Whose Turn Is It to Do the Dishes? (Servo + NTP + ntfy)
PI-94O‘rta
Premium

Pico W Chore Wheel: Whose Turn Is It to Do the Dishes? (Servo + NTP + ntfy)

A Raspberry Pi Pico W gets the time from the internet and passes the dish duty to the next person every midnight. A servo pointer shows today's name on the dial and that person's LED blinks. When the job is done, press the button briefly: the LED stays on, the pointer nods and a "done" notification goes to the phone. If nobody has pressed by 20:00, a reminder arrives. Hold the button for 1 second and the wheel spins to draw a name for an extra chore like the trash.