Arduino loyihalarini kashf qil
Boshlang‘ichdan yuqori darajagacha, sxemali, kodli va videoli yuzlab loyihalar. Qaysi darajada bo‘lsang, o‘sha yerdan boshla.

Pico W Turkish Word Clock: "SAAT ÜÇÜ ÇEYREK GEÇİYOR" (NTP + MAX7219 8x32)
The Raspberry Pi Pico W gets the time from the internet and says it with a Turkish sentence instead of digits: "SAAT ÜÇÜ ÇEYREK GEÇİYOR" (quarter past three) scrolls across an 8x32 LED sign. The endings come from a vowel harmony rule, not a ready-made list: ÜÇÜ, DÖRDÜ, BEŞİ, ALTIYI. Between sentences the digits appear. It chimes on the hour and beeps on the quarters; at night the sign dims and stays silent. At 00:00 on New Year's Day a tune plays and "YENİ YIL" scrolls by.

Habit Chain: Don't Drop Your 2027 Resolution (Arduino + DS1307 + 8x8 NeoPixel + 2 Buttons)
The don't break the chain method on your desk: press button A every day, that day's square on the 8x8 matrix lights green and the 64-day chain grows by one link. A day without a press stays red. Button B shows how many days in a row you have kept going. The DS1307 clock counts the days and the chain lives in its battery-backed memory, so it survives unplugging. Counting days from a real-time clock, keeping a record in bits, telling short from long presses.

ESP32-CAM Wi-Fi Live Camera
A live camera on your phone with a palm-sized board: the ESP32-CAM joins your home Wi-Fi and serves its own web page. Type the address from the Serial Monitor into your phone's browser and the live picture (MJPEG stream) appears. A button on the page turns the on-board flash LED on and off, and a list picks the resolution from 320x240 up to 1280x720. You upload the code with a CH340 USB-TTL adapter; one jumper between IO0 and GND while uploading is all it takes.

ESP32-CAM Camera That Takes Photos When It Sees Motion (PIR + microSD)
A battery-powered motion camera for a bird box or the front door. When the HC-SR501 PIR sees motion, the ESP32-CAM wakes from deep sleep, takes three photos and saves them in order on the board's own microSD slot as foto_0001.jpg, foto_0002.jpg. The photo number lives in EEPROM, so the order survives a battery change. When the motion is over the board goes back to sleep; no Wi-Fi or app needed.

ESP32-CAM Telegram Security Camera
When your door opens or something moves in the room, the ESP32-CAM takes a photo and your Telegram bot sends it to your phone. A reed switch and magnet guard the door, a PIR HC-SR501 watches the room. Type /photo to the bot for a photo on demand; /flash on, /alarm off and /status run the camera from anywhere. The bot only listens to your own chat id. You get the token from @BotFather; the steps are in the FAQ.

UNO R4 WiFi Web Server: Relay and LED
The UNO R4 WiFi joins your home Wi-Fi and serves its own web page. Two big buttons in your phone's browser switch the relay (a lamp LED) and a second LED on and off; no extra app needed. At start-up the board's IP address scrolls on the LED matrix, then the matrix shows the state with two icons: the lamp on the left, the LED on the right. You learn to build a web server with the R4's own WiFiS3 library.

UNO R4 WiFi Internet Clock: NTP and Matrix
A clock you never have to set: the UNO R4 WiFi joins Wi-Fi, gets the time from an NTP server on the internet and sets the RTC (real-time clock) inside the board. Hours and minutes scroll across the 12x8 LED matrix and the bottom row shows the seconds as a filling bar. The clock is corrected from the internet every 6 hours; unplug it, plug it back in and it finds the right time again by itself. No extra parts.

ESP32 Power Outage Alert: A Telegram Message to Your Phone When the Power Goes Out (Voltage Divider + OLED + Power Bank)
When the power goes out at home, a Telegram message reaches your phone with the time, and when it comes back you get the outage length. The 5 V of an adapter in the wall socket is read by the ESP32 through a voltage divider; the ESP32 runs from a power bank, so it keeps working during the outage. The OLED shows the state, voltage and duration, and a buzzer beeps. There is no connection to the 230 V mains, only the 5 V side of the adapter is measured.

Arduino Smart Pill Box: A Servo Lid That Opens the Right Compartment on Time (SG90 + DS1307 + I2C LCD + 3 Buttons)
A pill box that opens the right compartment by itself! The round box has morning, noon, evening and night compartments; at dose time the SG90 servo turns the lid in 45 degree steps to bring the opening over that compartment, the buzzer sounds and the LED blinks. Press OK and the lid closes; without a press it alerts again 10 minutes later. The DS1307 keeps the time; names and times are set with 3 buttons and stored in EEPROM.
