Arduino loyihalarini kashf qil
Boshlang‘ichdan yuqori darajagacha, sxemali, kodli va videoli yuzlab loyihalar. Qaysi darajada bo‘lsang, o‘sha yerdan boshla.

Playing Melodies with an IR Remote and Buzzer
Build a music box that plays tunes with the buttons of a TV remote. An infrared receiver catches the remote's signal; one button plays a lively video game tune through the buzzer, another a familiar…

Doorbell and Light with Motion Sensor
When someone comes up to your door, you know before they even ring. As soon as the motion sensor spots someone, the LED lights up and the buzzer plays a three-note chime from high to low; when the…

Simple Piano with Buzzer and Button
Build your own little piano with eight buttons. Each button is one note, from low to high: do, re, mi, fa, sol, la, ti and high do.

Parking Sensor with HC-SR04
A mini version of a car's parking sensor: the closer something gets, the faster the beeps.

Bomb Animation with 4-Digit 7-Segment Display
The ticking bomb scene from the films, right on your desk and completely harmless: the 4-digit display counts down from 1:05, the buzzer beeps every second and the red LED blinks.

Arduino Reaction Time Test with Sound Cue: Measure Your Reflexes in Milliseconds (LCD + Buzzer + 3 LEDs)
How fast are your reflexes? Press the button: the red LED says get ready, the yellow LED says steady and a random wait of 1.5 to 3.5 seconds begins. The moment the green LED lights up and the buzzer beeps, press again; your reaction time appears on the I2C LCD in milliseconds, with your session best and average below it. Press before green and the screen shows TOO EARLY! with a losing sound. Hold the button for a new player, so everyone races the same wait order.

ESP32 Melody Playback with Buzzer
Playing a simple melody (Twinkle Twinkle Little Star) with a passive buzzer. We play notes with tone() and noTone() functions like in Arduino - ESP32 works with the same syntax as Arduino Core 3.0+. Passive buzzer must be used (active buzzer does not play melody).

ESP32 Parking Sensor (HC-SR04 + 5-LED Bar + Buzzer + OLED)
The ESP32 version of a car parking sensor! The HC-SR04 ultrasonic sensor measures the distance to the object in front. As it gets closer, a 5-LED bar fills up (green → yellow → red) and the buzzer beeps faster. Very close (under 10 cm), a continuous alarm sounds and all LEDs light up. The SSD1306 OLED display shows the live distance in cm in large text, plus a status message.

Arduino Magic Drawing Tablet (2 Potentiometers + OLED Display)
We are rebuilding the classic magic drawing tablet with an Arduino! The left potentiometer moves the pen horizontally, the right one vertically, and the 0.96 inch OLED keeps a continuous line. The PEN button lifts and lowers the pen, while the CLEAR button wipes the screen with an eraser animation and a buzzer sound. A fun beginner project about analog input, jitter filtering and drawing on a display.

Arduino Ultrasonic Theremin (HC-SR04 + NeoPixel Ring + Buzzer)
A musical instrument you play without touching it, just by moving your hand in the air! As your hand gets closer to the HC-SR04, the passive buzzer plays higher notes and the 24-LED NeoPixel ring shows each note with color and fill level. A button switches between two modes: in SCALE mode every distance snaps to a note of a pentatonic scale, and in GLIDE mode the sound slides smoothly like an old sci-fi movie. Your hand writes the melody, not the code.

ESP32 Robot Eyes (OLED Display + TTP223 Touch Sensor)
A desk robot with feelings! The ESP32 draws two eyes on a 0.96 inch OLED that look around and blink on their own. Tap the TTP223 touch sensor and the robot gets happy, hold it and the eyes turn into hearts, poke it too often and it gets angry, ignore it for 20 seconds and it falls asleep. A passive buzzer gives every mood its own sound: a state machine, shape-based animation and non-blocking audio in one project.

ESP32 Pomodoro Timer (NeoPixel Ring + Button + Buzzer)
A glowing desk timer that keeps you off your phone while you study! The 24-LED NeoPixel ring shows the time left like a clock face: work is red, short breaks are green and the long break after every four sessions is blue. In the last 5 seconds the ring flashes and the passive buzzer ticks, then a rainbow celebrates the finished phase. One button starts, pauses and resets, all on an ESP32 without a single delay().
