Loyihalar · Arduino / ESP32 / Pico

Arduino loyihalarini kashf qil

Boshlang‘ichdan yuqori darajagacha, sxemali, kodli va videoli yuzlab loyihalar. Qaysi darajada bo‘lsang, o‘sha yerdan boshla.

Remote Control with ESP32 IR Receiver (with LCD Screen)
ES-22O‘rta
Premium

Remote Control with ESP32 IR Receiver (with LCD Screen)

In this project, we use the TSOP4838 IR receiver module to capture signals from a TV, air conditioner, or any other infrared remote control using the ESP32. With the IRremote v4 library, we display decoded nonzero raw codes on the I2C LCD screen. This example is intended to help identify remote control codes; it does not include turning an LED on or off or adjusting its brightness with the remote. This is a great starting point for converting old remotes into smart home controls.

4.7(19)
30
ESP32 Wi-Fi STA Connection (with LCD Screen)
ES-25Yuqori

ESP32 Wi-Fi STA Connection (with LCD Screen)

In this project, we connect the ESP32 to the home Wi-Fi network in Station (STA) mode in a secure, fault-tolerant manner. We store the SSID and password in a separate secrets.h file to prevent leaking to Git, set up an auto-reconnect mechanism, and display the RSSI signal level and IP address on an I2C LCD screen. The internal LED works as a status indicator. It is a production-grade connection manager.

4.4(21)
38
Real-Time Clock from the Internet via ESP32 NTP
ES-26Yuqori
Premium

Real-Time Clock from the Internet via ESP32 NTP

The ESP32 connects to Wi-Fi and fetches the real time from NTP (Network Time Protocol) servers with millisecond precision. configTzTime() applies the Turkey time zone (TRT, UTC+3) automatically, and in countries with daylight saving time the DST switch is handled by a POSIX TZ string. The time is printed both to the Serial Monitor and to an optional I2C LCD.

4.5(13)
22
ESP32 Asynchronous Web Server (with IP Display on LCD)
ES-27Yuqori

ESP32 Asynchronous Web Server (with IP Display on LCD)

In this project, we’re turning the ESP32 into an asynchronous web server that you can control from your phone or computer on the same Wi-Fi network. Thanks to the ESPAsyncWebServer library, the server can process multiple requests simultaneously (unlike the classic WebServer.h, which blocks on a single request). You’ll be able to open the ESP32’s IP address in a browser and click the ON/OFF buttons (the /on and /off routes) to turn the LED connected to GPIO 5 on and off.

4.8(16)
26
ESP32 WebSocket Counter (2 Buttons + LCD + Real-Time Web)
ES-28Yuqori
Premium

ESP32 WebSocket Counter (2 Buttons + LCD + Real-Time Web)

In this project, two buttons wired to the ESP32 (GPIO 5 counts up, GPIO 4 counts down) change a counter. The value updates instantly both on a 16x2 I2C LCD and, through the WebSocket support of ESPAsyncWebServer, in every connected browser without reloading the page. Instead of HTTP polling a single persistent connection is used, and the ESP32 sends the new value to everyone with ws.textAll().

4.5(14)
23
ESP32 mDNS: Accessing the Device via bluegrays-esp.local (with LCD Screen)
ES-29Yuqori
Premium

ESP32 mDNS: Accessing the Device via bluegrays-esp.local (with LCD Screen)

In this project we add an mDNS (Multicast DNS) service to the ESP32, so you reach it by a readable host name like bluegrays-esp.local instead of an IP address. Even if the IP assigned by DHCP changes, the device always answers to the same name. A small web server on the board lets you control the LED from your browser at http://bluegrays-esp.local/.

4.8(14)
23
ESP32 OTA Update — Wireless Firmware Installation (With LCD Screen)
ES-30Yuqori
Premium

ESP32 OTA Update — Wireless Firmware Installation (With LCD Screen)

In this project you'll learn to upload new firmware to the ESP32 over Wi-Fi, without a USB cable. With the ArduinoOTA library the ESP32 becomes visible on the network and shows up automatically as bluegrays-ota under "Network port" in the Arduino IDE. The first upload goes over USB; after that every update is wireless, a key feature for devices out in the field.

4.6(14)
22
ESP32 HTTPClient + Weather API (with LCD Screen)
ES-31Yuqori
Premium

ESP32 HTTPClient + Weather API (with LCD Screen)

In this project the ESP32 makes a REST API call over the internet to a weather API (wttr.in) using HTTPClient.h. The JSON response is parsed with ArduinoJson v7, and the city, temperature, humidity, weather and wind are shown on an I2C LCD. wttr.in needs no API key; just type the name of any city.

4.7(13)
20
ESP32 HTTPClient + Weather API (with SSD1306 OLED Display)
ES-32Yuqori
Premium

ESP32 HTTPClient + Weather API (with SSD1306 OLED Display)

In this project the ESP32 makes a REST API call over the internet to a weather API (wttr.in) using HTTPClient.h. Unlike the I2C LCD version, it uses an SSD1306 OLED (128×64) display, with large text and vector icons for a richer look. Seven weather icons (sunny, rainy, snowy and more) are drawn on the fly, with no bitmap files.

4.3(10)
22
ESP32 IR Universal Remote (IR Receiver + Remote Control + 3 LEDs + Buzzer + OLED)
ES-39Yuqori
Premium

ESP32 IR Universal Remote (IR Receiver + Remote Control + 3 LEDs + Buzzer + OLED)

Read a ready-made IR remote with the ESP32 and control your own device! The infrared receiver (NEC protocol, 38kHz) captures the signals of a 20-key remote: keys 1/2/3 toggle three separate LEDs and PWR turns them all off. Press an unknown key and the OLED shows its HEX code, so you can easily add your own remote's buttons to the code.

4.5(9)
16
ESP32 Motion Alarm System (PIR + Buzzer + LED + Telegram)
ES-41Yuqori
Premium

ESP32 Motion Alarm System (PIR + Buzzer + LED + Telegram)

A smart security alarm: when the PIR sensor detects motion, it sounds the buzzer, lights the LED and sends the owner an instant Telegram notification. A 30-second cooldown limits how often the alarm repeats; it does not filter out the PIR sensor's false detections. Use it at home, in a garage, a storeroom or a study.

9
ESP32 Live Gold and Currency Display (Wi-Fi + OLED Display + Button)
ES-46O‘rta
Premium

ESP32 Live Gold and Currency Display (Wi-Fi + OLED Display + Button)

What is gold trading at in Turkey right now? No need to check your phone! The ESP32 joins Wi-Fi, pulls gram gold, US dollar and euro prices in Turkish lira from a free, keyless JSON source and shows them on a 0.96 inch OLED. Prices refresh every 60 seconds; the button flips pages and a long press refreshes right away. If the internet drops, the last values stay on screen with an OFFLINE badge.

1