Teroka Projek Arduino
Ratusan projek dari pemula hingga mahir: gambar rajah litar, kod dan video. Mulakan di tahap mana pun kamu berada.

ESP32 Servo Motor (Potentiometer Control)
In this project, we control an SG90 servo motor using a potentiometer. We adjust the servo angle by mapping the analog value read from the potentiometer to the 0–180-degree range. The ESP32Servo library generates servo signals on suitable output-capable GPIO pins of the ESP32; this project uses GPIO 18. This is a fundamental control method for robotic arms, camera gimbals, and automatic door mechanisms.

ESP32 Egg Incubator Controller (DHT22 + Relay + Servo + OLED)
Hand the hen's job to an ESP32! The DHT22 measures temperature and humidity, a relay switches the heater with hysteresis, an SG90 servo gently tilts the egg tray every 3 hours, and the 0.96 inch OLED shows the day counter, a temperature graph and alarms. Chicken, quail and duck profiles are built in, and turning stops by itself for the last 3 days. If the sensor fails, the heater switches off for safety.

ESP32 Smart Curtain (NEMA 17 + A4988 + LDR + OLED)
The curtain opens by itself when the sun comes up and closes after dark! An LDR measures the light, an A4988 driver turns a NEMA 17 stepper with a soft start and stop, and the 0.96 inch OLED shows a window drawing, how open the curtain is and a sun or moon. Two buttons open and close it by hand, and holding one stops it halfway. The position is saved to flash, so after a power cut the curtain knows where it is.

ESP32 Weather Needle (Servo + WS2812B LED Ring + OLED)
A gauge that shows the weather with a needle and light instead of text! Over Wi-Fi the ESP32 fetches the current weather of six cities in one request; an SG90 servo needle points at sunny, partly cloudy, cloudy, rain or snow-storm on a card. A 24-LED ring shows the temperature as color and the weather as animation, and a 0.96 inch OLED shows city, temperature and wind. A button changes the city; hold it for a demo.

ESP32 Drumming Robot (2 Servos + OLED + Buzzer)
A little robot that plays the drums on your desk! Two SG90 servo arms become drumsticks and hit a box or a cup, while a passive buzzer adds the bass hits and a click on each bar. There are 6 rhythms, including rock, disco, march, halay, çiftetelli and 9/8; a potentiometer sets the tempo from 60 to 180 BPM and tapping the TAP button in time teaches the robot your speed. A 0.96 inch OLED shows a 16-step grid with a moving cursor.

ESP32 Camera Gimbal (MPU-6050 + 2 Servos + OLED)
Discover the secret of phone gimbals yourself! As the handle tilts, the MPU-6050 measures the angle and two SG90 servos turn the opposite way to keep the platform on top level. The angle is worked out 200 times a second with a complementary filter that blends gyroscope and accelerometer. The 0.96 inch OLED draws an artificial horizon like an aircraft gauge, and one button switches between LOCK, FOLLOW and CENTER.

ESP32 Card Dealing Robot (2 Servos + I2C LCD + Buzzer)
Let a robot deal the cards on game night! A turntable servo turns to the next player, a pusher arm servo slides the top card off the deck, and the buzzer clicks for every card. It knows Pişti and Batak, two classic Turkish card games, plus a colour-matching card game with 7 cards each and one face-up card, for 2–4 players with a random first player and pause, cancel and speed control. The I2C LCD shows who gets which card and what is left in the deck.

ESP32 Snack Vending Machine (Keypad + I2C LCD + 3 Servos + Buzzer)
A mini school canteen vending machine on your desk! The 1 and 5 lira buttons add credit, you pick a snack on the 4x4 keypad, and with enough credit that shelf's servo swings a pusher arm and drops it. Change comes in the fewest coins on the I2C LCD, with a jingle per coin. It counts in Turkish lira and is easy to switch to your own coins; a service code opens refill, sales report and prices.

ESP32 What Time Is It? Analog Clock Reading Teacher (2 Servos + Keypad + I2C LCD + Buzzer)
A clock reading game for primary school: two SG90 servos become the hour and minute hands on half-circle dials and show a random time; the child types it on the keypad and confirms with #. A right answer plays a happy tune; on a wrong one the misread hand wiggles and the I2C LCD shows the right time. 4 levels: o'clock, half past, quarter and 5 minutes.

ESP32 Robot Head That Follows You: Turns Its Head, Squints Its Eyes (2 HC-SR04 + 2 Servos)
A creepy but funny robot head that turns to face you wherever you go in the room. Two HC-SR04s measure in turn, and the head servo turns toward the one that sees you closer. Come too close and the eyelid servo narrows, the LED eyes dim and the robot gives you a suspicious look. With nobody around it looks about, after a while it falls asleep, and it wakes with a start when someone shows up.

ESP32 Wi-Fi Automatic Pet Feeder: Meals on Time, Phone Notifications (Servo + HC-SR04 + LCD + NTP + ntfy)
An ESP32 automatic pet feeder for a cat, dog or fish: it gets the time from the internet (NTP), rings a food bell before each of 3 daily meals, then an SG90 servo opens and shakes the hopper lid once per portion. An HC-SR04 measures how full the hopper is and warns when it runs low; every meal and low warning reaches your phone through ntfy. A button gives an extra portion (2 a day at most) or skips the day, and the pet never goes hungry when the internet or power drops.

ESP32 IoT Curtain Opener (SG90 Servo)
Tap + or − on your phone and the servo turns to that angle at the same moment: open and close a model curtain, a blind's tilt rod or a small lid from wherever you are. This project is the step-by-step guide to the Servo curtain IoT template in the app, built with an ESP32 and an SG90 servo using just 3 wires. Go to Workshop › Devices › Add a device; Ohmi prepares the code with your own device key. The code on this page is an example: the key and Wi-Fi details are placeholders.
