Potentiometer
Komponentlar

Potentiometer

4.6(65)
90
A potentiometer is a passive electronic component used to adjust the resistance value and thus control the flow of electricity in a circuit.

Bu komponent ishlatiladigan loyihalar

Turkish National Anthem with Buzzer
AR-15O‘rta

Turkish National Anthem with Buzzer

Press the button and a small buzzer starts playing the Turkish National Anthem, note by note.

4.8(114)
236
Print Message on 2x16 LCD Screen
AR-29Yuqori
Premium

Print Message on 2x16 LCD Screen

Your first step to writing text on a screen. The two-line LCD screen first shows a waiting message, then writes a greeting on the top line and types a word letter by letter on the bottom line like a…

4.6(37)
51
Bouncing Text Animation on LCD
AR-30Yuqori
Premium

Bouncing Text Animation on LCD

On the top line of the LCD screen, the word BLUEGRAYS slides from one edge to the other and bounces back like a ball off a wall, over and over without end.

4.5(29)
40
Measuring Distance Using LCD Display
AR-31Yuqori
Premium

Measuring Distance Using LCD Display

A tool that measures distance without a ruler: move your hand back and forth in front of the sensor and watch the number change.

4.6(45)
59
Servo Motor Operation with Potentiometer
AR-36Boshlang‘ich
Premium

Servo Motor Operation with Potentiometer

As you turn the potentiometer knob, the servo motor's arm turns right along with it: one end of the knob means zero degrees, the other end means half a turn.

4.6(37)
53
LED Chaser with Adjustable Speed
AR-7O‘rta

LED Chaser with Adjustable Speed

Six LEDs light up one after another, so the light seems to run from one end to the other.

4.6(72)
148
Knight Rider LED Effect with Adjustable Speed
AR-8O‘rta

Knight Rider LED Effect with Adjustable Speed

A light runs from one end of six LEDs to the other, turns around and runs back again.

4.5(60)
124
ESP32 LED Brightness Control with a Potentiometer (Analog → PWM)
ES-13O‘rta
Premium

ESP32 LED Brightness Control with a Potentiometer (Analog → PWM)

In this project, we control the brightness of an LED analogically using a potentiometer. The ESP32's ADC pin reads the 0-3.3V voltage from the potentiometer, and this value is then converted into a PWM (Pulse Width Modulation) signal and sent to the LED. As a result, as you turn the potentiometer, the LED gradually brightens and dims. With Arduino Core 3.0+, analogWrite() can be used directly; on the ESP32-S2/S3, the ADC resolution is fixed at 12-bit.

4.5(19)
32
ESP32 Servo Motor (Potentiometer Control)
ES-16O‘rta
Premium

ESP32 Servo Motor (Potentiometer Control)

In this project, we control an SG90 servo motor using a potentiometer. We adjust the servo angle by mapping the analog value read from the potentiometer to the 0–180-degree range. The ESP32Servo library generates servo signals on suitable output-capable GPIO pins of the ESP32; this project uses GPIO 18. This is a fundamental control method for robotic arms, camera gimbals, and automatic door mechanisms.

4.3(29)
42
ESP32 Color Mixer Light (3 Potentiometers + RGB LED + OLED)
ES-36Yuqori
Premium

ESP32 Color Mixer Light (3 Potentiometers + RGB LED + OLED)

A smart color-mixer lamp: turn 3 potentiometers on the ESP32 and mix any color you like! As you turn the red, green and blue potentiometers, the common-cathode RGB LED changes color instantly. The SSD1306 OLED display shows each channel's 0-255 value, fill bars and the HEX web color code (like #FF8040) live.

4.7(6)
10
Arduino Magic Drawing Tablet (2 Potentiometers + OLED Display)
AR-100Boshlang‘ich
Premium

Arduino Magic Drawing Tablet (2 Potentiometers + OLED Display)

We are rebuilding the classic magic drawing tablet with an Arduino! The left potentiometer moves the pen horizontally, the right one vertically, and the 0.96 inch OLED keeps a continuous line. The PEN button lifts and lowers the pen, while the CLEAR button wipes the screen with an eraser animation and a buzzer sound. A fun beginner project about analog input, jitter filtering and drawing on a display.

Raspberry Pi Pico LED Campfire (8x8 NeoPixel Matrix + Potentiometer + Buzzer)
PI-17O‘rta

Raspberry Pi Pico LED Campfire (8x8 NeoPixel Matrix + Potentiometer + Buzzer)

A campfire that doesn't burn or warm anything, but still crackles! The Raspberry Pi Pico draws a realistic flame on an 8x8 NeoPixel matrix, recalculated every frame: sparks appear at the base, heat cools as it rises and glows from red to white. A potentiometer sets the flame height, a button switches between Fire, Gas, Magic and Amethyst themes, and a buzzer adds the crackle of burning wood. Procedural animation, ADC, PWM and MicroPython in one project.

2

Tegishli asboblar