PI-34O‘rtaPremium
Raspberry Pi Pico Stopwatch (TM1637 + 2 Buttons + Buzzer)
Press, count, take a lap! We are building a stopwatch with hundredths on a Raspberry Pi Pico. The TM1637 display shows seconds and hundredths below one minute, then minutes and seconds. The START button starts and stops it, the LAP button takes a lap: LAP1 and that lap's time appear while the count keeps running. On reset the best lap is shown, and a buzzer confirms every action with a short beep.
0.0(0)

A stopwatch that shows hundredths of a second, for timing a run, something in the kitchen or an experiment. One button starts and stops it and the other takes a lap while it runs; the lap time flashes up on the four-digit display for a moment while the count carries on. When it is stopped, the lap button resets the timer and shows your fastest lap, and the buzzer answers every press with a short sound.
Manba kodi
Premium kontent
Bu loyihaning manba kodi, blokli ko‘rinishi va ko‘p so‘raladigan savollari Premium a’zolar uchun ochiq.
- Barcha loyiha kodlari
- Blokli ko‘rinish
- Ko‘p so‘raladigan savollar
