EL-9Boshlang‘ichPremiumAsosiy sxemalar
Two-Way Switch: One Light from Two Places
The secret of turning off at the top of the stairs the light you turned on at the bottom: two-way switch wiring (three-way in the US). Control a single LED from two separate places with two slide switches and the two traveler wires between them. You see that the switch steers the current to one of two paths instead of cutting it, and that the logic equivalent of this circuit is EXCLUSIVE OR.
0.0(0)

It is built with a 9 V battery, two slide switches, one 470 Ω resistor, one red LED and four jumper wires. The common terminal of the first switch goes to the + rail, the common terminal of the second goes to the LED through the resistor; the side legs are cross-connected with two traveler wires. Whichever switch you move, the state of the LED changes. What you learn: the structure of a three-leg SPDT switch, two-way switch wiring, the truth table and the EXCLUSIVE OR operation.
Premium kontent
Bu sxemaning o‘rnatish qadamlari, qanday ishlashi va ko‘p so‘raladigan savollari Premium a’zolar uchun ochiq.
- O‘rnatish qadamlari
- Qanday ishlaydi
- Ko‘p so‘raladigan savollar
