EL-5Boshlang‘ichPremiumAsosiy sxemalar

Voltage Divider: Brightness with an LDR

Your first circuit that measures light. An LDR is a sensor whose resistance falls as more light lands on it. When you connect it one after the other with a fixed resistor, you get a voltage divider: the voltage in the middle rises with the light and drives the LED. When you cover the sensor with your hand the LED goes out; when you shine a flashlight on it the LED gets bright. Here you learn the divider formula at the heart of sensor circuits.

0.0(0)
Voltage Divider: Brightness with an LDR
It is built with a 9 V battery, one LDR, 2.2 kΩ and 470 Ω resistors, one red LED and two jumper wires. The LDR and the 2.2 kΩ resistor split the battery voltage in two; the voltage at the midpoint falls to 0.2 V in the dark and goes above 7 V under a flashlight. Because the LED is connected to this point, it gets brighter as the light increases. What you learn: the voltage divider formula, how an LDR responds to light, how the voltage drops when a load is connected to the divider and why transistors are used in sensor circuits.

Premium kontent

Bu sxemaning o‘rnatish qadamlari, qanday ishlashi va ko‘p so‘raladigan savollari Premium a’zolar uchun ochiq.

  • O‘rnatish qadamlari
  • Qanday ishlaydi
  • Ko‘p so‘raladigan savollar