Loyihalar · Arduino / ESP32 / Pico

Arduino loyihalarini kashf qil

Boshlang‘ichdan yuqori darajagacha, sxemali, kodli va videoli yuzlab loyihalar. Qaysi darajada bo‘lsang, o‘sha yerdan boshla.

ESP32 Light Trail Duel: Two Player Retro Game (16x16 NeoPixel + 4 Buttons + Buzzer)
ES-97O‘rta
Premium

ESP32 Light Trail Duel: Two Player Retro Game (16x16 NeoPixel + 4 Buttons + Buzzer)

Two light bikes race across a 16x16 NeoPixel matrix without stopping and leave a glowing trail behind. Each player has two buttons: one turns the bike left, the other right. Hit a trail, the rival or the edge and you lose the round. The bikes speed up as the round goes on and the room runs out; the first to win 3 rounds takes the match. Score on the matrix, sounds from the buzzer. A two player duel in the style of the 80s trail games, made for New Year's Eve.

ESP32 New Year World Tour: Where Is 2027 Right Now? (NTP + I2C LCD + 24 LED Ring + Buzzer)
ES-98O‘rta
Premium

ESP32 New Year World Tour: Where Is 2027 Right Now? (NTP + I2C LCD + 24 LED Ring + Buzzer)

The new year does not reach the whole world at once: it starts on Kiritimati in the Pacific and travels west for 26 hours. This build follows that wave live. The ESP32 gets the time from the internet (NTP); whenever the new year enters one of 24 stops, one LED on the 24 LED ring lights up, the buzzer chimes and the LCD shows the city. The bottom row counts down to the next city. At the last stop the ring turns into a rainbow.

ESP32 IoT Room Station (Relay + DHT22)
ES-99O‘rta
IoT

ESP32 IoT Room Station (Relay + DHT22)

Turn your lamp on from your phone and watch your room's temperature and humidity live, wherever you are. This project is the step-by-step guide to the Room station IoT template in the app, built with an ESP32, a relay module and a DHT22. Go to Workshop › Devices › Add a device and pick Room station; Ohmi prepares the code with your own device key. The code on this page is an example: the key and Wi-Fi details are placeholders.

5.0(1)
4
ESP32 IoT RGB LED Strip (WS2812B)
ES-101O‘rta
IoT

ESP32 IoT RGB LED Strip (WS2812B)

Control your room's light from your phone: pick a color, set the brightness, turn on the rainbow or breathe effect. This project is the step-by-step guide to the RGB LED strip IoT template in the app, built with an ESP32 and a 30-LED WS2812B strip using three wires. Go to Workshop › Devices › Add a device and pick RGB LED strip; Ohmi prepares the code with your own device key. The code on this page is an example: the key and Wi-Fi details are placeholders.

1.0(1)
3
ESP32 IoT Plant Watering (Soil Sensor + Pump)
ES-102O‘rta
IoT

ESP32 IoT Plant Watering (Soil Sensor + Pump)

Let the pump start by itself when the soil in your pot dries out, and watch the soil moisture live on your phone. This project is the step-by-step guide to the Soil moisture + pump IoT template in the app, built with an ESP32, a soil moisture sensor, a relay and a mini water pump. Go to Workshop › Devices › Add a device; Ohmi prepares the code with your own device key. The code on this page is an example: the key and Wi-Fi details are placeholders.

ESP32 IoT Curtain Opener (SG90 Servo)
ES-103O‘rta
IoT

ESP32 IoT Curtain Opener (SG90 Servo)

Tap + or − on your phone and the servo turns to that angle at the same moment: open and close a model curtain, a blind's tilt rod or a small lid from wherever you are. This project is the step-by-step guide to the Servo curtain IoT template in the app, built with an ESP32 and an SG90 servo using just 3 wires. Go to Workshop › Devices › Add a device; Ohmi prepares the code with your own device key. The code on this page is an example: the key and Wi-Fi details are placeholders.

3
ESP32-CAM Camera That Takes Photos When It Sees Motion (PIR + microSD)
ES-105O‘rta
Premium

ESP32-CAM Camera That Takes Photos When It Sees Motion (PIR + microSD)

A battery-powered motion camera for a bird box or the front door. When the HC-SR501 PIR sees motion, the ESP32-CAM wakes from deep sleep, takes three photos and saves them in order on the board's own microSD slot as foto_0001.jpg, foto_0002.jpg. The photo number lives in EEPROM, so the order survives a battery change. When the motion is over the board goes back to sleep; no Wi-Fi or app needed.

ESP32 Bluetooth RGB LED Strip (WS2812B)
ES-110O‘rta
Bluetooth

ESP32 Bluetooth RGB LED Strip (WS2812B)

Change your strip's color, brightness and effect from your phone: the ESP32 connects straight to your phone over its built-in Bluetooth, and the WS2812B strip needs only 3 wires. This project is the step-by-step guide to the RGB LED strip Bluetooth template in the app. Go to Workshop › Devices › Add a device › Bluetooth, pick RGB LED strip and upload the code with Get the code. The Set up as a Bluetooth panel button on this page opens the wizard with this template.

1
ESP32 Power Outage Alert: A Telegram Message to Your Phone When the Power Goes Out (Voltage Divider + OLED + Power Bank)
ES-116O‘rta
Premium

ESP32 Power Outage Alert: A Telegram Message to Your Phone When the Power Goes Out (Voltage Divider + OLED + Power Bank)

When the power goes out at home, a Telegram message reaches your phone with the time, and when it comes back you get the outage length. The 5 V of an adapter in the wall socket is read by the ESP32 through a voltage divider; the ESP32 runs from a power bank, so it keeps working during the outage. The OLED shows the state, voltage and duration, and a buzzer beeps. There is no connection to the 230 V mains, only the 5 V side of the adapter is measured.