Arduino loyihalarini kashf qil
Boshlang‘ichdan yuqori darajagacha, sxemali, kodli va videoli yuzlab loyihalar. Qaysi darajada bo‘lsang, o‘sha yerdan boshla.

Raspberry Pi Pico Mini Weather Station (DHT22 + OLED Chart)
How has your room's temperature changed over the last two minutes? The Raspberry Pi Pico reads temperature and humidity from a DHT22 every 2 seconds and shows the value in big digits on a 0.96 inch OLED, with a line chart of the last 60 readings below. An arrow shows the trend and the temperature and humidity pages swap every 4 seconds. The OLED driver is built into the code: one file, no libraries.

Raspberry Pi Pico Keypad Lock (4x4 Keypad + I2C LCD + Servo)
A 4-digit code opens the door, and three wrong tries mean a 30 second wait! The Raspberry Pi Pico checks the PIN typed on a 4x4 keypad: if it's right, an SG90 servo unlocks and relocks by itself after 5 seconds. An I2C LCD shows the stars, the tries left and the countdown, and a buzzer beeps on every key. The default PIN is 1234; change it with the A key and the new one is saved to pin.txt.

Raspberry Pi Pico Flappy Bird (OLED Display + Button + Buzzer)
That infuriating bird from your phone, now on a 0.96 inch OLED with a single button! A Flappy Bird style game on the Raspberry Pi Pico: every button press makes the bird flap, each pair of pipes you pass scores a point and the gaps get tighter. A buzzer plays the flap, point and record sounds. The high score lives in flappy_best.txt, so it survives a power cut. Physics, collisions and a 30 FPS game loop in one file.

Raspberry Pi Pico Paddle Ball Game (OLED Display + 2 Potentiometers + Buzzer)
The classic paddle ball game, now on a 0.96 inch OLED for two players! Each player turns their own potentiometer to move a paddle. The ball speeds up on every hit and bounces off at an angle set by where it lands on the paddle; first to 5 points wins. A buzzer plays the wall, paddle and point sounds. Analog input, integer physics and partial screen updates in one game on the Raspberry Pi Pico.

Raspberry Pi Pico Shake Dice (MPU-6050 + OLED Display + Buzzer)
Lost your dice? No problem: shake the circuit and the die rolls on a 0.96 inch OLED! An MPU-6050 accelerometer senses the shake, the die wobbles and spins, and once you stop it slows down and lands on a face. The MODE button switches between one die and two; roll a double and the screen flashes while the buzzer plays a celebration tune. The Raspberry Pi Pico reads the sensor straight over I2C, no library needed.

Raspberry Pi Pico Chess Clock (2 TM1637 Displays + 2 Buttons + Buzzer)
Make your move, hit the button, and the clock switches sides! A two-player chess clock with a Raspberry Pi Pico: each player's time runs down on their own TM1637 display and the mover gets an increment. The last 10 seconds show hundredths, a flagged side blinks FLAG and the buzzer sounds an alarm. Press both buttons together to pause. The TM1637 driver lives in the code, no library needed.

Raspberry Pi Pico Metronome (Potentiometer + TM1637 + Buzzer + LED)
Turn the knob and the tempo follows! We are building a 40-200 BPM metronome with a Raspberry Pi Pico. A potentiometer sets the tempo, and a TM1637 display shows the BPM plus a pendulum that swings on every beat. The buzzer plays a high click on the first beat of the bar and a lower one on the rest, while an LED flashes in time. After each change the display names the tempo: Largo, Adagio, Allegro and more.

Raspberry Pi Pico Morse Code Translator (Button + OLED Display + Buzzer)
Tap the button and the Pico decodes your Morse! We are building a Morse code translator with a Raspberry Pi Pico that works like a telegraph key. A short press is a dot, a long press a dash; the buzzer beeps along and the OLED display shows each decoded letter in large type. A second button plays your text back in Morse, so you see both directions.

Raspberry Pi Pico Stopwatch (TM1637 + 2 Buttons + Buzzer)
Press, count, take a lap! We are building a stopwatch with hundredths on a Raspberry Pi Pico. The TM1637 display shows seconds and hundredths below one minute, then minutes and seconds. The START button starts and stops it, the LAP button takes a lap: LAP1 and that lap's time appear while the count keeps running. On reset the best lap is shown, and a buzzer confirms every action with a short beep.

Raspberry Pi Pico Digital Spirit Level (MPU-6050 + OLED Display)
Shelf up, but is it straight? We are building a digital spirit level with a Raspberry Pi Pico. The MPU-6050 measures gravity, and the OLED shows a bubble in a bullseye plus the X / Y tilt. Stand the board on its edge and the display turns into a classic tube level. Below 0.5° the display lights LEVEL, and just like a real one, the bubble drifts to the higher side.

Raspberry Pi Pico Alarm Desk Clock (DS1307 + TM1637 + Buzzer)
A desk clock that keeps time even through a power cut! The Raspberry Pi Pico reads the time from a battery-backed DS1307 real-time clock, and a TM1637 display shows hours:minutes with a blinking colon. When the alarm time comes, the buzzer plays double beeps and the display pulses; one button snoozes it for 5 minutes. The alarm lives in the DS1307's battery-backed memory, and the display dims itself at night.

Raspberry Pi Pico Water Tank Level Gauge and Automatic Pump (HC-SR04 + OLED + Relay)
A smart gauge that measures the water level without ever touching the water! An HC-SR04 measures the distance from the tank lid to the water, and the Raspberry Pi Pico turns it into percent and liters. At 20% the relay starts the pump and stops it at 95%; if no water comes or the tank overflows, the buzzer sounds an alarm. The OLED shows a rippling tank drawing, the flow rate and the time left to fill.
