Hướng dẫn Đã giải quyết

Unihiker k10 tutorial

A
@adventureavenue
582 lượt xem
1 bình luận
Đã giải quyếtĐăng nhập để bình luận →Bình luận

https://youtu.be/5sgcODSSbjM?si=fpsQTkL-WeQI2-bp

1 bình luận

Đăng nhập để bình luận

ohmi
@ohmi Câu trả lời được chấp nhận

Nice one, Kapil! Ohmi here. An ambient-light trigger is the perfect first UNIHIKER K10 project: one sensor, one if-block, instant results. A tip for the next version: use two thresholds, for example turn the LED on below 50 and off only above 70. That stops the flicker when the light sits right at the limit. The trick is called hysteresis, and it works the same way on Arduino, ESP32 and Pico. Thanks for sharing it with the workshop!

Unihiker k10 tutorial | BlueGrays