Nhiệt độ và độ ẩm Bluetooth với ESP32 (DHT11)
Theo dõi trực tiếp nhiệt độ và độ ẩm trong phòng trên điện thoại với ESP32 và cảm biến DHT11: hai ô số đo và một biểu đồ cập nhật mỗi 2 giây, không cần internet. Dự án này là hướng dẫn từng bước cho mẫu Bluetooth Nhiệt độ và độ ẩm trong ứng dụng. Vào Xưởng › Thiết bị › Thêm thiết bị › Bluetooth, chọn mẫu và nạp code bằng Lấy code. Nút Cài đặt thành bảng điều khiển Bluetooth trên trang này mở sẵn trình hướng dẫn.

Video
Sơ đồ mạch

Mã nguồn
1// ┌───────────────────────────┐
2// │ BlueGrays · bluegrays.com │
3// │ Bluetooth · ESP32 │
4// │ BG-Hava │
5// └───────────────────────────┘
6// Temperature and humidity
7// Arduino IDE board: ESP32 Dev Module
8// the BLE library comes with the ESP32 board package, nothing extra to install
9
10#include <BLEDevice.h>
11#include <BLEServer.h>
12#include <BLE2902.h>
13#include <DHT.h> // Library Manager: 'DHT sensor library' (Adafruit)
14
15const char BLE_NAME[] = "BG-Hava"; // the board advertises with this name, the app finds it in the list by it
16
17// Pins: change them here if you wired differently
18const int DHT_PIN = 4;
19const unsigned long READ_EVERY_MS = 2000; // a new reading is sent every 2 seconds
20
21void btWrite(const char *text);
22void onValue(const char *key, const char *value);
23void sendAll();
24void onLinkLost();
25
26// ── The app sends "key=value" lines; on "?" the board sends all its values ──
27char line[65];
28uint8_t lineLen = 0;
29unsigned long lastRxMs = 0;
30
31bool is(const char *a, const char *b) { return strcmp(a, b) == 0; }
32bool isOn(const char *v) { return v[0] == '1'; }
33
34void sendText(const char *key, const char *value) {
35 char out[72];
36 snprintf(out, sizeof(out), "%s=%s\n", key, value);
37 btWrite(out);
38}
39
40void sendInt(const char *key, long value) {
41 char text[12];
42 snprintf(text, sizeof(text), "%ld", value);
43 sendText(key, text);
44}
45
46void sendFloat(const char *key, float value) {
47 char text[16];
48 dtostrf(value, 1, 1, text);
49 sendText(key, text);
50}
51
52void handleLine(char *text) {
53 char *eq = strchr(text, '=');
54 if (eq == nullptr) {
55 if (text[strlen(text) - 1] == '?') {
56 btWrite("@v=1.0\n"); // the "@v" line tells the app the code version
57 sendAll();
58 }
59 return;
60 }
61 *eq = '\0';
62 onValue(text, eq + 1);
63}
64
65void feed(char c) {
66 lastRxMs = millis();
67 if (c == '\n' || c == '\r') {
68 if (lineLen == 0) return;
69 line[lineLen] = '\0';
70 lineLen = 0;
71 handleLine(line);
72 } else if (lineLen < sizeof(line) - 1) {
73 line[lineLen++] = c;
74 }
75}
76
77// ── Bluetooth (Nordic UART) ──
78#define UART_SERVICE "6E400001-B5A3-F393-E0A9-E50E24DCCA9E"
79#define UART_RX "6E400002-B5A3-F393-E0A9-E50E24DCCA9E"
80#define UART_TX "6E400003-B5A3-F393-E0A9-E50E24DCCA9E"
81
82BLECharacteristic *txChar = nullptr;
83volatile bool linked = false;
84volatile bool linkLost = false;
85// incoming bytes move from the Bluetooth task to loop() through a small ring buffer
86const int RX_SIZE = 256;
87volatile uint8_t rxBuf[RX_SIZE];
88volatile int rxHead = 0, rxTail = 0;
89
90class ServerEvents : public BLEServerCallbacks {
91 void onConnect(BLEServer *server) override { linked = true; }
92 void onDisconnect(BLEServer *server) override { linked = false; linkLost = true; }
93};
94
95class RxEvents : public BLECharacteristicCallbacks {
96 void onWrite(BLECharacteristic *c) override {
97 auto v = c->getValue();
98 for (size_t i = 0; i < v.length(); i++) {
99 int next = (rxHead + 1) % RX_SIZE;
100 if (next == rxTail) break;
101 rxBuf[rxHead] = (uint8_t)v[i];
102 rxHead = next;
103 }
104 }
105};
106
107// lines go out in 20-byte packets (works with every phone)
108void btWrite(const char *text) {
109 if (!linked || txChar == nullptr) return;
110 size_t n = strlen(text);
111 for (size_t i = 0; i < n; i += 20) {
112 size_t len = n - i < 20 ? n - i : 20;
113 txChar->setValue((uint8_t *)text + i, len);
114 txChar->notify();
115 delay(4);
116 }
117}
118
119void btBegin() {
120 BLEDevice::init(BLE_NAME);
121 BLEServer *server = BLEDevice::createServer();
122 server->setCallbacks(new ServerEvents());
123 BLEService *uart = server->createService(UART_SERVICE);
124 txChar = uart->createCharacteristic(UART_TX, BLECharacteristic::PROPERTY_NOTIFY);
125 txChar->addDescriptor(new BLE2902());
126 BLECharacteristic *rx = uart->createCharacteristic(UART_RX, BLECharacteristic::PROPERTY_WRITE | BLECharacteristic::PROPERTY_WRITE_NR);
127 rx->setCallbacks(new RxEvents());
128 uart->start();
129 BLEAdvertisementData adv;
130 adv.setFlags(0x06);
131 adv.setCompleteServices(BLEUUID(UART_SERVICE));
132 BLEAdvertisementData scan;
133 scan.setName(BLE_NAME);
134 BLEAdvertising *advertising = BLEDevice::getAdvertising();
135 advertising->setAdvertisementData(adv);
136 advertising->setScanResponseData(scan);
137 BLEDevice::startAdvertising();
138}
139
140void btPoll() {
141 while (rxTail != rxHead) {
142 char c = (char)rxBuf[rxTail];
143 rxTail = (rxTail + 1) % RX_SIZE;
144 feed(c);
145 }
146 if (linkLost) {
147 linkLost = false;
148 onLinkLost();
149 delay(100);
150 BLEDevice::startAdvertising();
151 }
152}
153
154// ── ESP32 ──
155DHT dht(DHT_PIN, DHT11);
156float temperature = NAN, humidity = NAN;
157unsigned long lastReadMs = 0;
158
159// if the sensor can't be read the app gets "@err=dht": check the wiring
160void readSensor() {
161 float t = dht.readTemperature();
162 float h = dht.readHumidity();
163 if (isnan(t) || isnan(h)) {
164 btWrite("@err=dht\n");
165 return;
166 }
167 temperature = t;
168 humidity = h;
169}
170
171void sendReadings() {
172 if (isnan(temperature)) return;
173 sendFloat("sicaklik", temperature);
174 sendInt("nem", lround(humidity));
175}
176
177void onValue(const char *key, const char *value) {
178}
179
180void sendAll() {
181 if (isnan(temperature)) readSensor();
182 sendReadings();
183}
184
185void onLinkLost() {
186}
187
188void setup() {
189 Serial.begin(115200);
190 dht.begin();
191 btBegin();
192 Serial.print(F("BlueGrays Bluetooth: "));
193 Serial.println(BLE_NAME);
194}
195
196void loop() {
197 btPoll();
198 if (millis() - lastReadMs >= READ_EVERY_MS) {
199 lastReadMs = millis();
200 readSensor();
201 sendReadings();
202 }
203}
204FAQ
Nó có chạy với iPhone không?
Có. Bo mạch dùng Bluetooth Low Energy (BLE) tích hợp của ESP32, và ứng dụng BlueGrays kết nối với nó trên cả iPhone và Android. Các module Bluetooth cổ điển như HC-05 hay HC-06 không kết nối được với iPhone, vì vậy dự án này không dùng chúng. Đừng cố ghép nối bo mạch trong cài đặt Bluetooth của điện thoại; chỉ ứng dụng mới tạo kết nối.
Mình có thể dùng DHT22 thay cho DHT11 không?
Được. DHT22 (AM2302) đo dải rộng hơn và chính xác hơn: khoảng -40 đến 80 °C, ±0,5 °C. Cách đấu dây giữ nguyên. Mẫu trong ứng dụng được làm cho DHT11, nên hãy đổi DHT11 thành DHT22 trong dòng DHT dht(DHT_PIN, DHT11) rồi nạp lại. Thang biểu đồ của bảng điều khiển được đặt theo dải của DHT11 (0 đến 50 °C).
Vì sao giá trị chỉ thay đổi mỗi 2 giây, và chúng chính xác đến đâu?
DHT11 không thể được đọc nhiều hơn một lần mỗi giây, nên code đo và gửi mỗi 2 giây với READ_EVERY_MS = 2000. Cảm biến đo từ 0 đến 50 °C và độ ẩm 20% đến 90%, với sai số khoảng ±2 °C và ±5% độ ẩm. Như vậy là ổn để theo dõi một căn phòng; muốn chính xác hơn, hãy chuyển sang DHT22.
Khi điện thoại của mình ở xa, số đo có được lưu không?
Không. Bo mạch chỉ gửi giá trị hiện tại và không lưu lịch sử. Biểu đồ được vẽ từ các giá trị đến trong lúc bảng điều khiển đang mở và bo mạch đang kết nối; khi điện thoại ra ngoài tầm phủ sóng hoặc bạn đóng ứng dụng, không có điểm mới nào được thêm vào. Khi bạn kết nối lại, ứng dụng gửi ? và bo mạch gửi ngay các giá trị mới nhất của nó.
