EL-92O‘rtaPremiumMantiqiy element sxemalari
Binary to 7-Segment: CD4511 Decoder
Set a binary number with four slide switches and see it as a digit on the display: 0101 gives 5, 1001 gives 9. The CD4511 does the conversion; it looks at its four inputs and decides which bars light on the common cathode 7-segment display. For numbers from 10 to 15 the display goes blank on purpose. You learn the 8, 4, 2, 1 place values, what a decoder does and why the inputs are held steady with pull-down resistors.
0.0(0)

It is built with 5 V (MB102), one CD4511, a single-digit common cathode 7-segment display, four slide switches and eleven resistors. The switches give the binary number to the D, C, B, A inputs; the 10 kΩ resistors hold the input of a switch in the 0 position at GND. The CD4511 decodes the number and drives the segments through 470 Ω resistors: about 5 mA per segment. 0 to 9 appear as digits, and from 10 to 15 the display goes blank. What you learn: binary numbers and place values, the decoder, the truth table, the pull-down resistor, the segment resistor calculation.
Premium kontent
Bu sxemaning o‘rnatish qadamlari, qanday ishlashi va ko‘p so‘raladigan savollari Premium a’zolar uchun ochiq.
- O‘rnatish qadamlari
- Qanday ishlaydi
- Ko‘p so‘raladigan savollar
