EL-52O‘rtaPremiumMantiqiy element sxemalari

2-to-1 Multiplexer: Select One of Two Inputs

Let a single select input decide which of two data inputs reaches the output. In this 2-to-1 multiplexer, built with the 74HC04, 74HC08 and 74HC32, the red LED follows D0 while S3 is released and D1 while it is pressed. The yellow and green LEDs show which input is selected at that moment. This is the basis of circuits that choose one of two microphones or two sensors.

0.0(0)
2-to-1 Multiplexer: Select One of Two Inputs
It is built on a full-size breadboard with a 5 V supply, one 74HC04, one 74HC08, one 74HC32, three buttons, six resistors and three LEDs. S1 and S2 are the data inputs (D0, D1), and S3 is the select input (S). One of the two AND gates passes D0 and the other passes D1; S and its inverse decide which one is open. The OR gate joins the two paths and drives the red LED. The yellow LED shows that D0 is selected, and the green LED shows that D1 is selected. What you learn: the select input, the multiplexer expression, an eight-row truth table and connecting gates one after another.

Premium kontent

Bu sxemaning o‘rnatish qadamlari, qanday ishlashi va ko‘p so‘raladigan savollari Premium a’zolar uchun ochiq.

  • O‘rnatish qadamlari
  • Qanday ishlaydi
  • Ko‘p so‘raladigan savollar