EL-24O‘rtaPremiumTranzistor sxemalari
Broken Wire Alarm: A Two-Transistor Latching Alarm
Stretch a thin wire across a door or the lid of a box: the moment the wire breaks the buzzer sounds and the LED lights. Even if the wire is reconnected, the alarm does not stop; only the reset button silences it. The secret is a BC547 and a BC557 keeping each other on: the two transistors latch like a thyristor. While waiting, it draws only about 0.09 mA from the battery.
5.0(1)
1 bajarildi
It is built with a 9 V battery, one BC547, one BC557, an active buzzer, a red LED, seven resistors, a 100 nF capacitor, a reset button and a thin wire. While the wire is intact, the base of the transistor is held at GND and the circuit is silent. When the wire breaks, the base receives current, the two transistors turn each other on and latch; the buzzer sounds and the LED lights. Even if the wire is reconnected the alarm keeps going, and the button silences it. What you learn: thyristor logic, positive feedback, standby current and the battery life calculation. It is not a real security system.
Premium kontent
Bu sxemaning o‘rnatish qadamlari, qanday ishlashi va ko‘p so‘raladigan savollari Premium a’zolar uchun ochiq.
- O‘rnatish qadamlari
- Qanday ishlaydi
- Ko‘p so‘raladigan savollar
