Loyihalar · Arduino / ESP32 / Pico

Arduino loyihalarini kashf qil

Boshlang‘ichdan yuqori darajagacha, sxemali, kodli va videoli yuzlab loyihalar. Qaysi darajada bo‘lsang, o‘sha yerdan boshla.

ESP32 WS2812B NeoPixel Strip Control
ES-24O‘rta
Premium

ESP32 WS2812B NeoPixel Strip Control

WS2812B (NeoPixel) addressable LEDs are smart RGB LEDs that can be chained and controlled from a single data pin. In this project we drive an 8-LED WS2812B strip with the Adafruit_NeoPixel library and create a smooth rainbow animation. The ESP32's 3.3V logic works with most WS2812B batches; if it gets unstable, we show the fix with a 470Ω series resistor and a 1000µF capacitor. The animation shifts the hue in HSV color space.

4.9(19)
30
ESP32 Wi-Fi STA Connection (with LCD Screen)
ES-25Yuqori

ESP32 Wi-Fi STA Connection (with LCD Screen)

In this project, we connect the ESP32 to the home Wi-Fi network in Station (STA) mode in a secure, fault-tolerant manner. We store the SSID and password in a separate secrets.h file to prevent leaking to Git, set up an auto-reconnect mechanism, and display the RSSI signal level and IP address on an I2C LCD screen. The internal LED works as a status indicator. It is a production-grade connection manager.

4.4(21)
38
Real-Time Clock from the Internet via ESP32 NTP
ES-26Yuqori
Premium

Real-Time Clock from the Internet via ESP32 NTP

The ESP32 connects to Wi-Fi and fetches the real time from NTP (Network Time Protocol) servers with millisecond precision. configTzTime() applies the Turkey time zone (TRT, UTC+3) automatically, and in countries with daylight saving time the DST switch is handled by a POSIX TZ string. The time is printed both to the Serial Monitor and to an optional I2C LCD.

4.5(13)
22
ESP32 Asynchronous Web Server (with IP Display on LCD)
ES-27Yuqori

ESP32 Asynchronous Web Server (with IP Display on LCD)

In this project, we’re turning the ESP32 into an asynchronous web server that you can control from your phone or computer on the same Wi-Fi network. Thanks to the ESPAsyncWebServer library, the server can process multiple requests simultaneously (unlike the classic WebServer.h, which blocks on a single request). You’ll be able to open the ESP32’s IP address in a browser and click the ON/OFF buttons (the /on and /off routes) to turn the LED connected to GPIO 5 on and off.

4.8(16)
26
ESP32 WebSocket Counter (2 Buttons + LCD + Real-Time Web)
ES-28Yuqori
Premium

ESP32 WebSocket Counter (2 Buttons + LCD + Real-Time Web)

In this project, two buttons wired to the ESP32 (GPIO 5 counts up, GPIO 4 counts down) change a counter. The value updates instantly both on a 16x2 I2C LCD and, through the WebSocket support of ESPAsyncWebServer, in every connected browser without reloading the page. Instead of HTTP polling a single persistent connection is used, and the ESP32 sends the new value to everyone with ws.textAll().

4.5(14)
23
ESP32 mDNS: Accessing the Device via bluegrays-esp.local (with LCD Screen)
ES-29Yuqori
Premium

ESP32 mDNS: Accessing the Device via bluegrays-esp.local (with LCD Screen)

In this project we add an mDNS (Multicast DNS) service to the ESP32, so you reach it by a readable host name like bluegrays-esp.local instead of an IP address. Even if the IP assigned by DHCP changes, the device always answers to the same name. A small web server on the board lets you control the LED from your browser at http://bluegrays-esp.local/.

4.8(14)
23
ESP32 OTA Update — Wireless Firmware Installation (With LCD Screen)
ES-30Yuqori
Premium

ESP32 OTA Update — Wireless Firmware Installation (With LCD Screen)

In this project you'll learn to upload new firmware to the ESP32 over Wi-Fi, without a USB cable. With the ArduinoOTA library the ESP32 becomes visible on the network and shows up automatically as bluegrays-ota under "Network port" in the Arduino IDE. The first upload goes over USB; after that every update is wireless, a key feature for devices out in the field.

4.6(14)
22
ESP32 HTTPClient + Weather API (with LCD Screen)
ES-31Yuqori
Premium

ESP32 HTTPClient + Weather API (with LCD Screen)

In this project the ESP32 makes a REST API call over the internet to a weather API (wttr.in) using HTTPClient.h. The JSON response is parsed with ArduinoJson v7, and the city, temperature, humidity, weather and wind are shown on an I2C LCD. wttr.in needs no API key; just type the name of any city.

4.7(13)
20
ESP32 HTTPClient + Weather API (with SSD1306 OLED Display)
ES-32Yuqori
Premium

ESP32 HTTPClient + Weather API (with SSD1306 OLED Display)

In this project the ESP32 makes a REST API call over the internet to a weather API (wttr.in) using HTTPClient.h. Unlike the I2C LCD version, it uses an SSD1306 OLED (128×64) display, with large text and vector icons for a richer look. Seven weather icons (sunny, rainy, snowy and more) are drawn on the fly, with no bitmap files.

4.3(10)
22
ESP32 Deep Sleep — Battery Saving (OLED + RTC RAM Counter)
ES-33Yuqori
Premium

ESP32 Deep Sleep — Battery Saving (OLED + RTC RAM Counter)

The ESP32's Deep Sleep mode shuts down the CPU and most peripherals, cutting current draw to about 10µA, which is vital for battery-powered IoT devices. This project uses three wake-up sources: a timer (15 s), an external pin (EXT0, the button on GPIO 33) and a touch pin (T0/GPIO 4). Counters marked with RTC_DATA_ATTR survive deep sleep.

4.3(10)
16
ESP32 Prayer Rakat Counter (HC-SR04 + SSD1306 OLED + 2 Buttons)
ES-34Yuqori
Premium

ESP32 Prayer Rakat Counter (HC-SR04 + SSD1306 OLED + 2 Buttons)

Do you sometimes lose track of which rakat you are on during prayer? This project is a rakat counter that sits next to your prayer mat and counts your prostrations when you bring your hand close. The HC-SR04 ultrasonic distance sensor detects your hand, the SSD1306 OLED display shows the count, and two buttons let you choose 2, 3 or 4 rakats and reset. A 2.5-second debounce and a "hand-away" check make sure no prostration is counted twice.

4.8(11)
14
ESP32 RFID Door Lock (RC522 + Servo + OLED + Buzzer + LED)
ES-35Yuqori
Premium

ESP32 RFID Door Lock (RC522 + Servo + OLED + Buzzer + LED)

We build a smart door lock with an ESP32, an RC522 RFID module, an SG90 servo, an SSD1306 OLED display, an active buzzer and 2 LEDs. When a card is scanned, its UID is checked against the authorized cards defined in the code; if it matches, the servo unlocks (green LED + 2 short beeps) and locks again after 5 seconds. An unknown card lights the red LED, gives 3 quick beeps and shows its UID on the OLED.

4.8(9)
16