Arduino loyihalarini kashf qil
Boshlang‘ichdan yuqori darajagacha, sxemali, kodli va videoli yuzlab loyihalar. Qaysi darajada bo‘lsang, o‘sha yerdan boshla.

Santa Trap: What Time Did He Come? (Arduino + PIR + DS1307 + LCD)
The trap arms itself when the light goes off. If the PIR sees motion, the time is read from the DS1307 and saved, and the servo camera swings left and right; all night the I2C LCD gives nothing away. When the light returns in the morning, the screen shows the time of the first visit and how many visits there were. Night/day sensing with an LDR and hysteresis, PIR rising edge detection and non-blocking servo motion with millis() are in the code.

ESP32 Tank Duel: Two Player Retro Game (ILI9341 TFT + 2 Joysticks + Buzzer)
A two player tank duel on a color TFT screen, in the style of the two player tank games of the 80s. Each player drives a tank in 8 directions with a joystick and fires by pressing the stick down. Bullets bounce 3 times off the walls: you can hit a rival hiding behind a corner with a bank shot, but your own bullet can come back and hit you too. A tank that is hit explodes and the rival scores 1 point; first to 5 points wins. Score at the top, sounds from the buzzer.

Pico Baby Busy Board: Light and Sound Toy (4 Buttons + Pot + RGB LED)
Each of the four buttons is an animal: the cow moos, the cat meows, the dog goes woof woof and the bird chirps. Every sound has its own RGB colour and its own light pattern on three LEDs. The potentiometer is a rainbow knob: turn it and six colours click past, with a surprise white and a sparkle at the end. After 10 seconds without a touch the board calls for attention with a silent light pattern. A busy board a parent builds by hand and fits into a box.

Homemade Yogurt Maker: 8 Hours at 43 °C (Arduino + DS18B20 + PID)
A waterproof DS18B20 measures the milk, and a PID loop drives the relay in a time window to hold the heater at 43 °C. Once the temperature reaches the target, an 8-hour countdown starts. The I2C LCD shows the temperature, the PID output and the time left, and the buzzer sounds when time is up. Two buttons set the target (38-46 °C) and the duration (4-12 hours). Active-low relay handling, sensor fault and overheat protection are in the code.

Pico Sprint Stopwatch: Light Gates for PE Class (2 LDRs + TM1637)
Put one LDR light gate at the start of the track and one at the end: the time starts when the runner cuts the light of the first gate and stops at the second. The TM1637 display shows the time in seconds and hundredths, then the speed in km/h. A button press tunes the gates to the ambient light, then three beeps and "Go" give the start. When the class record falls, the display flashes "bESt" and a tune plays. A long press picks 10, 20 or 30 metres.

ESP32 Firefly Jar: Lights That Fall Into Sync on Their Own (8 LEDs + Button)
The 8 LEDs in the jar are fireflies: they flash at random first, and a few minutes later, with nobody telling them, all of them flash at once. There is one rule: a firefly that sees a neighbour flash moves its own clock a little forward. When sync arrives the jar glows for 3 seconds. A short press of the button shakes the jar and scatters them; a long press stops them seeing each other. In the fast version in the video sync takes 11 seconds. No PWM, no library.

Enigma Cipher Machine: 3-Rotor Encryption (Arduino + KY-040 + I2C LCD)
Pick a letter with the KY-040 encoder and press: the encrypted letter appears on the I2C LCD and three rotors move one step, so the same letter turns into a different one on every press. Type the ciphertext again with the same key and the plain text returns: in the video, with key AAA, UNO became ZQN, and typing ZQN gave UNO again. Rotor tables, the double step, the reflector and a self test that runs 26 keys at power-up are in this project.

ESP32 Sunrise Alarm Clock: Wake Up Gently with Light (DS1307 + LED Ring + LCD)
Getting up in the dark on a winter morning is hard. 20 minutes before the alarm this clock slowly lights a 24-LED ring from the bottom up: deep red first, then orange, warm white at the end. At alarm time the buzzer plays birdsong. The PLUS button snoozes for 5 minutes, the SET button silences it. A battery-backed DS1307 keeps the time and the alarm is stored on the board, so neither is lost in a power cut. The LCD shows the time, the alarm and the sunrise percentage.

Pico Colour Wheel Teacher: Complementary Colours (24-LED WS2812B Ring + Pot)
A 24-LED RGB ring becomes a colour wheel: every pixel is one hue. Turn the potentiometer to pick a colour; the MODE button shows its complement, its triadic scheme and its neighbouring colours on the ring. The QUIZ button starts a game: half of the ring shows a colour, and you turn the pot until the other half shows its complement, then confirm. The ring lights green if you are right, red if you are wrong, then shows the answer on the wheel. The buzzer ticks at every colour step.

Musical Chairs: Press When the Music Stops (Arduino + 4 Buttons + 4 LEDs + Buzzer)
Musical chairs for four players: the buzzer plays music and goes silent at a random moment. When it stops everyone presses their own button and the LED of each player who pressed lights up; the last one left is out. Pressing while the music plays is a foul and that player is out too. Rounds go on until one player is left and the winner's LED blinks to a victory tune. Non-blocking music, button debounce and random timing are all in here.

Alarm Clock That Won't Stop Until You Solve It (Arduino + DS1307 + LCD + 4 Buttons + Buzzer)
An alarm clock with no snooze button: when the alarm rings, a multiplication question and four choices appear on the LCD, and you answer with the A, B, C, D buttons. The buzzer does not go silent until you solve three questions in a row; a wrong answer resets the counter. The time is read from the DS1307 and the alarm is set with the same four buttons. Reading a real-time clock, making random questions and sounding an alarm without blocking are all in this project.

ESP32 Fall Alarm: Notifies the Family if Nobody Answers (MPU-6050 + Button + Buzzer)
Worn on a belt or in a pocket, this device uses an MPU-6050 to catch a sudden impact followed by stillness. Once that counts as a fall it counts down 30 seconds: the buzzer beeps and the LED blinks. Pressing the I am OK button in that time cancels the alarm. If nobody presses it, a siren sounds and the ESP32 sends a notification to the family's phones over Wi-Fi with ntfy. Made for icy winter days and relatives who live alone; the siren works even without internet.
