EL-12PemulaPremiumLitar transistor
Touch Switch: A Finger-Activated LED with a Darlington Pair
A switch with no button: touch two bare wire ends with your finger and the LED lights; take your finger away and it goes out. Your finger acts like a resistor of a few megohms, passing only a few microamps. Two BC547s connected as a Darlington pair amplify this current at least 12,000 times and light the LED. You use your own finger to see what gain means and how skin conducts electricity.
0.0(0)

It is built with a 9 V battery, two BC547s, 470 Ω, two 100 kΩ and 1 MΩ resistors, a red LED and five jumper wires. When your finger touches both ends, a few microamps flow from the battery through the 100 kΩ resistors and your skin into the base of the first transistor. The Darlington pair amplifies this current at least 12,000 times; about 13 mA flows through the LED. The 1 MΩ resistor pulls the base to GND when there is no touch, turning the LED off. What you learn: the Darlington connection, current gain, skin resistance, pull-down and protective resistors.
Kandungan Premium
Langkah pemasangan, cara berfungsi dan soalan lazim litar ini terbuka untuk ahli Premium.
- Langkah Pemasangan
- Cara Ia Berfungsi
- Soalan Lazim
